If the glass were kept hot enough, it would flow over the molten tin until the top surface was also flat, horizontal and perfectly parallel to the bottom surface.
如果玻璃保持足够的温度，它就会在熔化的锡中流动，直到顶部表面也变得平整、水平，与底部表面完全平行。
The bottom surface (5) is designed to contact a handle (b).
该底面(5)设计用于与手柄(B)接触。
A top surface and a bottom surface are defined on the base plate.
该基板上定义一顶表面和一底表面。
A second concave part is formed on the bottom surface of the base plate.
该基板的该底表面形成一第二凹陷部。
The bottom surface is bonded with adhesive paper to cover the through hole.
所述底面粘设有胶纸，以遮盖所述通孔。
A package with pins distributed over much or all of the bottom surface of the package.
一种封装，插脚分布在封装底部的大部分或全部表面。
The concrete foundation bottom surface should be smooth solid, not into the pot bottom.
混凝土基础底面要平整夯实，基础底部不能作成锅底状。
The top surface of the wing box has two skin panels, and the bottom surface has three panels.
翼盒的顶部有两块表面板材，底部有三块板材。
This paper tries to provide a new method of the plow bottom surface design by a mathematical method.
本文试图为犁体曲面的设计提供一种新的设计方法——用数学的方法设计犁体曲面。
Researchers said the wear on the bottom surface suggests that it could be the oldest known limb prosthesis.
研究人员说，穿底部表面上表明它可能是最古老的下肢义肢。
What would be the bottom surface of the block is then skimmed flat, and locating dowel pin holes are drilled.
将具有什么样的底部表面块然后脱脂持平，与定位柱销孔钻。
The ellipsoidal curved surface of each semiellipsoid is adjacent to the junction surface and the bottom surface.
各半椭球体有椭球曲面邻接接合面和底面。
So, that means you have to figure out what's the bottom surface of your solid, and what's the top surface of your solid?
这意味着你必须指出,立体图形的底部的曲面，和立体图形的顶部曲面？
A viscose thin film affixed to the bottom surface of the thermo-insulated layer is covered with a split shape paper.
黏覆于该隔温层底面的黏胶薄膜，该黏胶薄膜外部被覆一层离形纸；
The microwave system comprises a set of microwave assemblies arranged on the bottom surface of each partition layer.
所述微波系统包含一组设在各隔层底表面上的微波组件。
Should first bonding wire brush to remove sediment from the bottom surface, and then immediately sprayed coating job.
应先用钢丝刷刷去除粘结底层表面的沉积物，然后立即喷涂工作涂层。
Based on this foundation, basic models of plow-bottom surface are ruled surface and negative constant curvature surface.
据此得出直纹和负常曲率两类曲面可作为犁体曲面的基本模型。
The purpose and the principle of the slab bottom surface cleaning technology of the Handan Steel CSP plant were introduced.
本文介绍了邯钢CSP生产线连铸坯下表面清理技术的目的、原理、效果和发展前景。
The top surface has much effect on dissolution process and the bottom surface make a notable contribution to diffusion process.
上表面对膜的溶解过程影响较大，下表面对膜的扩散控制有较大贡献。
Bymeans of this result, the bottom surface shapes of known workpiecescan be distinguished by the touch sensor system of the robot.
然后，我们得到一种用触觉系统判别未知图形的方法。
Powerful sole cleaner , can effectively remove bottom surface spray paint and oil layer, usable also do PU , PVC materials treatment agent.
强力鞋底清洁剂，可有效去除底材料表面的喷漆和油脂层，也可做PU、PVC材料处理剂。
It is made from a generally foot-shaped bottom layer having a length extending from a heel area to a toe area, a top surface and a bottom surface.
该鞋垫由通常为足形的底层制成，该底层具有从踵部区域延伸至脚趾区域的长度、顶表面以及底表面。
The maximal vertical space between the ellipsoidal curved surface and the bottom surface is larger than the maximal height of the junction surface.
其中，椭球曲面与底面的最大垂直间距大于接合面的最大高度。
Such structural features can be identified by contouring directly on either top or bottom surface of the reservoir with a contour interval of 1-5m.
直接以油层顶面（或底面）为准绘制小等高线间距（1—5米）构造图，可显示出微型构造特征。
Thereafter, the via hole is filled with a core layer, wherein the core layer extends from a bottom surface of the substrate to a top surface thereof.
之后，以核心层填充该介层洞，其中该核心层从该基材的下表面延伸到上表面。
In the design of plow bottom surface formed by horizontal straight-line elements, it is important to determine the shape and parameters of guiding curve.
在设计水平直元线犁体曲面时，确定其导曲线的形状和参数是重要的一环。
It is usually expressed by the decibels which is the straight beam probe tested the second time subtracting from the first bottom surface echo amplitude.
通常用纵波直探头测试的第几次与第一次底面回波幅度所差的分贝数表示。
If they hit the bottom surface before passing through, they are reflected off and absorbed at the top - and thus are not detected at the other end of the plates.
如果没有穿过之前，中子就掉落到底板，那么它们会反弹到顶板，并被吸收——这样就不会在发射另一端检测到。
The invention relates to a copper alloy nickel-net magnetic composite, which is the integral belt structure rolled by stock belts in top and bottom surface layers and middle layer.
本发明铜合金镍网磁性复合材料是由上下表面层和中间层的原料带材复合轧制成一体的带材结构。
The invention relates to a copper alloy nickel-net magnetic composite, which is the integral belt structure rolled by stock belts in top and bottom surface layers and middle layer.
本发明铜合金镍网磁性复合材料是由上下表面层和中间层的原料带材复合轧制成一体的带材结构。
应用推荐