The effects of seeds and the calcination temperature on the properties of the powder were studied.
分析了添加籽晶和煅烧温度对粉体性能的影响。
The suitable process system, such as calcination temperature and calcination time etc. has been found out.
摸索出合适的煅烧温度、煅烧时间等工艺制度。
As the increases of calcination temperature, the red mud surface is more rougher, more compact and more cemented.
随着焙烧温度的增大，赤泥表面的粗糙度越明显，结构的致密性越强，并呈现出较强的胶结性。
The calcination temperature was determined by the thermal analysis and ceramic microstructure was observed by SEM.
根据热重分析拟定粉体的预烧温度，并通过SEM观察陶瓷的微观结构。
The effects of the doped noble metals or carbonate and the calcination temperature on the sensitivity of sensors were studied.
考察了掺杂贵金属或碳酸盐及焙烧温度对敏感元件气体灵敏度的影响。
The flux dosage and calcination temperature, which affect luminosity of the fluorescent powder, are the major controlling factors.
激活剂用量和煅烧温度影响荧光粉的发光亮度，是主要控制因素。
In the method, glucose content, calcination temperature, and calcination time have important effects on the performance of LiFePO4.
在此方法中，煅烧时间、煅烧温度、葡萄糖含量对产物性能影响很大。
The apparent density increased with the increase of calcination temperature, while the surface area and pore volume decreased little.
随着焙烧温度的升高，比表面积、孔体积略有减少，表观堆密度增大。
The property of the sample was measured, and the effect of calcination temperature, absorbing time on adsorption reaction was discussed.
测试了样品的性能，讨论了煅烧温度、吸附时间对其吸附性能的影响。
The effect of calcination temperature, content of nickel and molybdenum on the selective hydrogenation performance of catalyst were investigated.
考察了载体焙烧温度、金属镍与钼的负载量对催化剂选择性加氢性能的影响。
The influences of ignition temperature, fuel content in the precursor gel and calcination temperature on the characteristics of as_prepared particles were investigated.
考察了着火温度、燃料用量和热处理温度对所获得的粉体特性的影响。
Calcination temperature, time and acid concentration were tested in laboratory and then scale-up test was carried in an industrial plant, both giving satisfying results.
在实验室试验中对煅烧温度、时间、酸浓度等条件进行试验，然后在工业装置中进行放大试验，结果令人满意。
Many factors which may affect the catalytic behavior such as rare earth metal species, calcination temperature, reaction temperature, space speed and feed gas purity were studied.
并研究了不同稀土金属，不同焙烧温度，不同反应温度，不同空速条件及不同来源氢气等因素对催化性能的影响。
The effect of surface active agent, supercritical drying temperature, pressure and holding time, calcination temperature and holding time on the properties of powders are studied.
研究了位阻剂、超临界流体干燥处理工艺和晶化温度对粉末性能的影响。
Effects of calcination temperature, space velocity, base content, reaction temperature, modification of various ions on the reactivity and selectivity of the catalysts were examined.
考察了催化剂焙烧温度、空速、碱含量、反应温度和不同阴、阳离子改性对催化剂活性和选择性的影响。
In this paper, the effects of calcination temperature, holding time and content of dolomite on the strength and expansion rate of cement mixed with calcined dolomite are investigated.
研究了白云石的煅烧温度、保温时间以及掺量等对水泥物理性能和膨胀行为的影响规律。
The influences of calcination temperature of catalyst, ratio of methanol to oleic acid, quantities of water absorbent and catalyst on esterification performance were emphatically studied.
重点讨论了催化剂的活化温度、醇酸配料比、吸水剂用量、催化剂加入量等因素对酯化反应的影响。
The influence factors of the reaction, such as calcination temperature of the catalyst, catalyst loading, reaction temperature, reaction time and the ratio of raw materials, were investigated.
探讨了催化剂烘培温度、催化剂用量、反应温度、反应时间、原料配比等因素对反应的影响。
The effect of different calcination temperature and the maintaining time at a certain temperature on the compressive strength of flue gas desulphurization gypsum-fly ash composite were studied.
研究了不同的煅烧温度及保温时间对脱硫石膏-粉煤灰新型复合胶凝体系抗压强度的影响。
The effects of the Ar calcination on the structure, phase composition, morphology and anti-high temperature oxidation property of the ceramic coatings were studied.
利用阴极等离子体液相沉积技术实现了在不锈钢表面制备氧化铝膜层，研究了氩气焙烧处理对膜层的结构、组成、形貌和抗高温氧化性能的影响。
The brightening technology of kaolin co existed in coal was studied. The studied contents included temperature of removing impurities with acid, the concentration of acid and calcination technology.
探讨了开滦唐山矿的煤系高岭土增白工艺，对酸浸脱杂的温度、酸质量分数及煅烧工艺制度进行了深入研究。
However, each calcination stage fire enamel firing (temperature of 800-850 degrees) in terms of the work is arduous test.
但是，每个高温焙烧阶段大明火珐琅焙烧(温度达800至850度)对作品来讲都是艰巨考验。
When heated to high temperature, they undergo calcination, releasing carbon dioxide.
高温加热时， 石灰石和白云石将发生煅烧，并释放二氧化碳。
Results show that the surface of silica sands can be purified and quantities of the acid consumption can be reduced by high temperature calcination.
结果表明，高温焙烧可以净化硅砂的表面，使硅砂的耗酸值降低。
The differential calcination technology is introduced in this paper to stabilize the high temperature layer of clinker calcined by shaft kiln.
介绍了采用差热煅烧法稳定立窑烧成熟料的高温层。
With the convertor sludge as raw material and with mixed binding of organic and inorganic binding agent, high quality sludge pellet was prepared by crumby pressing and low temperature calcination.
以转炉污泥为原料，配入有机和无机复合结合剂，采用压制成型和低温焙烧的方法研制了高性能转炉污泥球团，并探索了影响球团强度的各种因素。
With the convertor sludge as raw material and with mixed binding of organic and inorganic binding agent, high quality sludge pellet was prepared by crumby pressing and low temperature calcination.
以转炉污泥为原料，配入有机和无机复合结合剂，采用压制成型和低温焙烧的方法研制了高性能转炉污泥球团，并探索了影响球团强度的各种因素。
应用推荐