The results of calculation and simulation indicate that application of the discrete method for problem of trajectory optimization can avoid the problem of initial value sensitivity.
仿真计算结果表明这种离散化的方法应用于此轨道优化问题可以避免传统轨道优化方法对初值敏感的问题。
This paper studies the simulation method of tie line power flow control among areas of an interconnected network in load flow calculation.
本文对潮流计算中互联电网各区域间的联络线功率控制的模拟计算方法进行了研究。
For a typical assembly stress problem, digital simulation is conducted by means of the hybrid method with different numerical calculation methods.
针对一个典型的装配应力问题，运用不同的数值计算方法，对混合求解法进行了数值模拟。
The functions, calculation method, component module and program running interface of this simulation model are introduced.
描述了该仿真模型的功能、计算方法和部件模块设计及程序运行界面。
An improved numerical model and calculation method for stability simulation of a novel type of a pulse tube refrigerator.
第一部分给出了脉冲管制冷机数值模拟的基本方程和改进的数值计算方法。
Because the calculation method is accomplished by MATLAB Tool, it is in favor of realizing design and simulation of high-frequency chain switch power supply circuit.
由于该计算方法是在MATLAB环境下进行，有利于进一步实现高频链开关电源电路的设计和仿真。
The conception of transient frequency and calculation method of wavelet packet are introduced, and time frequency distribution about simulation and actual seismic signals is given.
介绍了瞬时频率的概念和瞬态谱的小波包计算方法，并结合时间域模拟信号给出了其时频分布。
The detailed process and method of Monte Carlo simulation calculation are presented.
详细叙述了蒙特卡洛模拟计算的具体过程和方法。
The method is adopted in the tail-race system dynamic simulation calculation of Baise hydropower station, and the tailrace tunnel shape is optimized, so the satisfying result is worked out.
将该方法应用于百色水电站的尾水系统动态仿真计算中，并对尾水隧洞洞型进行优化，得到了满意的结果。
The charge simulation method for the calculation of the electric field intensity in the rod-plate gap is also briefly introduced.
为了进行外加场强的计算，文中还简介了用模拟电荷法计算棒——板间隙场强的方法。
With the theory of finite element method, the simulation calculation is conducted for the axial pressure distribution law, the leakage rate and the pressure variation of the seal rings.
利用有限元法理论，对密封圈的压力沿轴向的分布规律、泄漏量与压力变化关系进行了模拟计算。
In this study, a suit of formula for mining overburden bed separation volume calculation was developed based on numerical simulation using cube shape curve regression method.
文章的研究基于数值模拟，采用三次样条曲线回归方法，推导出一套计算采动覆岩离层量大小的公式。
This paper strives to provide an important numerical simulation method for the practical engineering implementation by means of modern fire resistant design based on calculation.
力求通过基于计算的现代耐火设计，为实际工程实施提供重要的数值模拟方法。
Then, the complex integral calculation problem in the reliability model of stress and strength interference was simplified by using the Monte Carlo Simulation Method.
其次，采用应力与强度干涉模型和蒙特卡罗模拟法，解决了可靠度计算公式中复杂积分的计算问题。
To achieve the purpose, we have developed a calculation method of numerical simulation and the ways on how to use the method to simulate a model of the area source properly.
采用数值模拟计算的方法，对面源模式做了实际计算，并将其计算结果与虚点源后置法做了分析和比较。
The result of simulation indicates that this method not only satisfies the precision but also enables us to enhance the calculation speed of the trajectory equations.
仿真结果表明换极后的球谐函数计算扰动引力能够满足精度要求，且在计算中弹道方程的解算速度也有很大的提高。
Simulation and calculation show that this method is capable for the fine description and calculation of fracture.
模拟计算表明，运用该算法能较好地描述裂缝。
The paper explains the characteristic of GMS and the method of building model in the groundwater simulation software and gives a calculation example.
本文通过地下水模拟软件中具有代表性的GMS，阐述了它的一些基本特点，以及它在地下水模拟过程中的建模方法，并给出了一个计算实例。
Based on the RCS calculation method of a single chaff, using vector transport theory, a computer simulation on the RCS calculation of chaff cloud is conducted.
以单根箔条rcs的计算方法为基础，使用矢量输运理论对箔条云团rcs的计算进行了计算机仿真，并基于半解析法开发了箔条云团rcs模拟仿真软件包。
Simulation calculation results indicate that the method can be used in the analysis of an anisotropic medium.
模拟计算表明该方法可用于各向异性介质的分析。
This paper presents an analysis and calculation method for braking performance of Vehicles on straight road. The computer simulation and road tests are carried out with good consistency.
本文提出了一种汽车直线制动性能的分析和计算方法，并对具体的车型进行了模拟计算和实车道路试验。
The developed model and the research method employed are valuable for the cutting forces calculation and numerical simulation of other kinds of drills with indexable inserts.
本文建立的模型和所采用的研究方法为其他类型的浅孔钻切削力的计算与数值仿真提供了有价值的参考。
An efficient and simple calculation method is pro-posed for the simulation of the startup process with base load, which can greatly save computation time.
提出一种简单有效的方法计算带压仓负荷的开机过程，能大大节省计算时间。
Simulation results of practical example show that the method can improve the calculation accuracy and the speed of the convergence process compared with BP and BP trained by GA.
实例计算表明，与BP算法及BP与GA结合算法比较，该方法在提高误差精度的同时可以加快训练收敛的速度。
In this paper a stiffness simulation calculation method of low speed flutter models of an aeroplane is studied.
本文探讨了飞机低速颤振模型刚度模拟计算的一种方法。
The simulation modeling method of excitation system for stability calculation and the check method of parameters are proposed based on the current need of power system.
结合当前电力系统的实际需要，提出了稳定计算用励磁系统数学模型仿真建模及参数校核方法。
The results from calculation and simulation show that the proposed method can effectively restrain the negative sequence voltage and current caused by unbalanced parameters of transmission line.
计算分析结果表明，该方法能够有效抑制由线路参数不对称产生的负序电流和电压。
Through the process of grade and reserve calculation, a method of dealing with voxel for visualization technology and its applications in an integrated simulation system were provided for deposits.
通过品位与储量等矿石属性计算的实现，为矿床的三维可视化仿真提供体素处理手段。首先对原始采样数据进行预处理，以构造满足需要的规则体数据；
Through the process of grade and reserve calculation, a method of dealing with voxel for visualization technology and its applications in an integrated simulation system were provided for deposits.
通过品位与储量等矿石属性计算的实现，为矿床的三维可视化仿真提供体素处理手段。首先对原始采样数据进行预处理，以构造满足需要的规则体数据；
应用推荐