The casting methods include investment static casting and centrifugal casting.
铸造方法包括熔模静铸及熔模离心铸造。
The centrifugal casting process of high aluminum-zinc alloys was investigated through products.
结合产品试验了高铝锌基合金的离心铸造工艺。
A method of dynamic action was used during the solidification of the alloy in centrifugal casting.
在离心浇铸金属凝固过程中，采用动态效应的方法对以达到细化晶粒的目的。
The reels have infinite anti-reverse, centrifugal casting brakes, and a solid aluminium body frame.
角子机具有无限反逆转，离心铸造制动器，以及坚实的铝制车身框架。
At last, cylinder of double spiral roller grinded-paste machine is produced by centrifugal casting.
最后，通过离心铸造生产出双螺旋辊式磨浆机筒体。
The particle segregation occurs in SiC particles reinforced Al matrix composites by centrifugal casting.
在离心铸造粒子增强金属基复合材料中，增强体颗粒会发生偏析。
The centrifugal casting technique of manufacturing roll sleeve of high chromium cast iron composite was studied.
本文研究确定了离心铸造高铬铸铁复合辊套的工艺措施；
The corresponding measures should be adopted on raw material management, hot metal melting and centrifugal casting.
相应的应从原材料管理，铁水熔炼，离心铸造上采取控制措施。
Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness.
高速离心铸造，组织致密，无砂眼、夹渣，表面光滑、壁厚均匀。
Meanwhile, the component of high chromium cast iron which is suitable to dual-metals centrifugal casting was analyzed.
分析了适用于双金属离心铸造工艺特点的高铬铸铁的成分；
HCH-201 for the manufacture of centrifugal casting forming the glass pipe structure layer and the general FRP products.
HCH- 201用于制造离心浇铸成型玻璃钢管道结构层和一般玻璃钢制品。
The white spot defect is an abnormal structure generally found in large cast iron cylinder sleeve by centrifugal casting.
白斑是离心铸造厚壁铸铁缸套的一种异常组织。
The main task of this paper is to research the processing of functionally gradient disc-like parts by centrifugal casting.
本文重点研究了离心铸造铝基复合材料梯度功能盘状零件的成形工艺。
The paper described the melting process, the mechanical properties of TEGOSTAR738 alloy and the centrifugal casting process.
以TEGOSTAR738锡基巴氏合金为例，阐述了对其熔炼过程及室温力学性能要求；
Moreover a factory also produces the metal mold casting, the centrifugal casting, the continuous casting and other casting and so on.
另外本厂还生产金属型铸造、心铸造、续铸造及其他铸造等。
The paper discussed the cause of cold model vibration in centrifugal casting, and provided the methods to reduce and avoid the vibration.
本文探讨了冷型在离心铸造过程中产生振动的原因，提出了减小和防止冷型在离心过程中振动的方法。
The hardness and depth of chill layer on the roller outer surface can be raised with adding trace Bi into liquid Fe in centrifugal casting.
离心铸造时在铁水中加入微量的铋，可以提高滚筒外壳冷硬层的硬度和深度。
The results show that the greater casting thickness, rotating speed and radius of centrifugal casting are, the greater the filling ratio are.
试验结果表明，试样铸件厚度越大，离心半径越大，离心转速越高，铸件型壳的充填率越高。
This paper reports the study of the ductile iron roller recombined with tungsten carbide particles on the surface by using centrifugal casting.
本文通过离心铸造法研究了球铁基表面复合碳化钨粒子的轧辊。
This paper discusses PLC control system formation, casting technical process and control theory of PLC in centrifugal casting iron pipe machine.
本文介绍了PLC控制系统组成、浇铸工艺流程、及PLC在离心球墨铸管机中的控制原理。
In the process of centrifugal casting, the stable overturn speed of the sector ladle is the main reason to influence the quality of casting pipes.
在离心铸管浇注过程中，扇形包翻转速度稳定与否是影响铸管成形质量的主要因素。
The hardware system structure and main functions of monitoring system of centrifugal casting machines based on inverter technology were introduced.
介绍了基于变频技术的离心浇铸机控制系统的硬件系统构成和主要功能，给出了系统监控画面设计。
As a highly efficient and low-cost special casting method, horizontal centrifugal casting occupies a decisive position in material molding methods.
卧式离心铸造作为一种效率高、成本低的特种铸造方法，在材料成型方法中占有举足轻重的地位。
The three most commonly used method of manufacturing FRP are Cross-winding process, continuous winding process and the centrifugal casting process.
国际上现有三种制造夹砂压力管的工艺方法。它们分别是，交叉缠绕工艺、连续缠绕工艺和离心浇铸工艺。
The high-Cr cast iron which is modified by 0.8% V-Fe is obtained by centrifugal casting and high cr iron microstructure and performance are discussed.
采用0.8%钒铁变质后的高铬铸铁，进行电磁离心铸造浇铸，研究高铬铸铁组织和力学性能变化。
The problems of material selection, nodularizing and inoculation treatment and the technical parameter control of the centrifugal casting are mainly discussed.
着重论述了材质选择、球化孕育处理和离心铸造工艺参数控制等问题。
The shortcomings of horizontal centrifugal casting machine are analyzed, and a vertical casting unit in structure of double-layered hollow abdomen is designed.
文章分析了卧式离心铸造机的不足，并针对这些不足，设计了一种双层空腹主轴结构的立式离心铸造机。
The material of metal mould, the structure characteristics of a type connector metal mould and the influence on mould for centrifugal casting have been introduced.
本文介绍了适合于制作离心铸造用金属模的材料和A型接口金属模的结构特点及其对模具的影响。
One of keys of production of centrifugal casting pipe of s. g. iron is continuous and fast delivery of qualified base iron with proper chemical composition and temperature.
应用离心铸造工艺生产球墨铸铁管，连续快速提供化学成分和温度均合格的优质铁液是生产的关键环节之一。
One of keys of production of centrifugal casting pipe of s. g. iron is continuous and fast delivery of qualified base iron with proper chemical composition and temperature.
应用离心铸造工艺生产球墨铸铁管，连续快速提供化学成分和温度均合格的优质铁液是生产的关键环节之一。
应用推荐