This pump is centrifugal pump with the knife.
本泵为带刀离心泵。
Several types of bearings are used on centrifugal pump shafts.
在离心泵轴上使用多种类型的轴承。
Single suction, single stage horizontal centrifugal pump with closed impeller.
单吸、单级卧式离心泵，用封闭叶轮。
Reply: : The goods supply scope for roots blower and centrifugal pump is not including cable.
答复：罗茨风机和离心泵供货范围中不需要带电缆。
CAD method for improving design quality and efficiency of centrifugal pump impeller is provided.
本文为提高离心泵叶轮的设计质量及效率提供了一个新的方法。
The characteristics of centrifugal pump unit given by pump specimen are obtained by testing with water.
泵样本上给出的离心泵组的特性都是用水试验得出的。
The improvement of Multiple centrifugal pump sealing protection ring for ammonia production was introduced.
介绍了合成氨生产中多级离心式打水泵密封保护环的改造。
NEW: The safe to run dry pump – a revolutionary innovation in magnetically coupled centrifugal pump technology.
新：磁力泵能安全干运转-这是磁力泵在技术上的一个革新。
The experimental results and design theory for low-specific-speed centrifugal pump with splitter blades are detailed.
详细地综述了国内外长短叶片离心泵的试验研究、设计理论研究方面的成果及现状。
The vacuum takes off the angry aircrew including the vacuum takes off angry machine, vacuum pump and centrifugal pump.
真空脱气机组是包括真空脱气机、真空泵和离心泵。
This paper introduces designing methods, structure and function of CAPP software system of centrifugal pump elaborately.
介绍了离心泵CAPP系统软件的设计方法以及该软件的组成和功能。
The wear reason of trust balance device of Centrifugal pump is analyzed theoretically. A workable Solvent is put forward.
从理论上分析了离心泵推力平衡装置产生磨损的原因，并提出了可行的解决办法。
OBJECTIVE To evaluate the effect of centrifugal pump on blood platelet functions during cardiopulmonary bypass in children.
目的探讨离心泵对小儿体外循环血小板功能的影响。
The finite element method is used for the three-dimensional flow field calculation in designing centrifugal pump impellers.
为进行离心泵叶轮的三元设计，用有限元方法解决了离心泵叶轮三元流场的计算问题。
This program suited for centrifugal pump design and manufacture phase, the method rarely used in the production of the site.
这一方案适于在离心泵的设计制造阶段，该方法在生产现场很少采用。
The mine drainage centrifugal pump operating in the piping with high resistance have smaller fluorite and lower efficiency .
矿山排水离心泵在阻力偏高管网中工作时，其流量偏小，效率低。
Objective: to evaluate the use of centrifugal pump to assist circulation during routine and emergency cardiopulmonary bypass.
目的：评估离心泵在临床常规体外循环、急症体外循环及辅助循环手术中的使用情况。
With this series we offer you an absolutely safe to run dry, magnetically coupled centrifugal pump, without any ifs and buts.
我们提供的这种系列的磁力泵是绝对可以干运转的，不会发生任何意外。
ZLHB series stainless steel explosion-proof chemical centrifugal pump is applicable to transport inflammable chemical liquids.
ZLHB系列不锈钢防爆化工离心泵，适用于输送易燃性化工液体。
This paper presents some advances in the study of centrifugal pump performance under pure liquid phase transient flow conditions.
本文介绍了离心泵在纯液相流瞬变工况的性能研究的一些进展。
The paper introduces the structure, working principle, advantage of gas seal in centrifugal pump and its application and prospect.
介绍干气密封的结构、工作原理、优越性，以及在离心泵轴封领域的应用情况和前景。
This thesis is divided into four parts in virtual realistic technology being applied to design and simulation of Centrifugal Pump.
本文将虚拟现实技术的应用于离心泵的设计与模拟共进行了四个方面的研究。
The stainless steel centrifugal pump uses the water cooling mechanical seal, extends the mechanical seal service life effectively.
不锈钢离心泵采用水冷却机械密封，有效延长机械密封使用寿命。
A centrifugal pump for the disabled, it is necessary to pump and hose to motor-pumped Wells, pumps and a net release of water hose.
对于停用的离心泵，要把泵和胶管提出机井，放净泵内和胶管内的存水。
The IS100-65-315 centrifugal pump as the research object, the prediction and optimization of the structural noise has been studied.
本文以is100- 65 - 315离心泵为具体研究对象，对结构噪声预测与优化控制进行了初步的研究。
Basic structure of the centrifugal pump is composed of six parts, namely: impeller, pump, pump shaft, bearing, seal ring, stuffing box.
离心泵的基本构造是由六部分组成的，分别是：叶轮，泵体，泵轴，轴承，密封环，填料函。
Centrifugal pump should normally be at or near the manufacturer's design requirements to run under the conditions of pressure and flow.
离心泵通常应在或接近制造厂家设计规定的压力和流量条件下运行。
Comparing of performance curves and cavitation property with common centrifugal pump of same specific speed was presented in this paper.
同时，针对旋流泵的性能曲线和汽蚀问题与同比转数普通离心泵进行了对比分析。
It is one of discussion problems people are paying attention to that manufacturing anticorrosive, economic and effective centrifugal pump.
制作耐蚀且经济有效的离心泵是目前人们关注的课题之一。
It is one of discussion problems people are paying attention to that manufacturing anticorrosive, economic and effective centrifugal pump.
制作耐蚀且经济有效的离心泵是目前人们关注的课题之一。
应用推荐