The technology for foreign clean steel production was introduced.
介绍了国外洁净钢的生产技术。
Argon blowing in tundish is a new technology for production of clean steel.
中间包吹氩是适应洁净钢冶炼的新技术、新方法。
High Quality steel - Ultra clean steel to extend bearing life by up to 80%.
使用超纯精钢锻制，使用寿命延长80%。
RH vacuum refining technology is a powerful method of producing clean steel.
RH真空精炼是大批量生产优质纯净钢的重要手段。
Maybe only designers know that it is actually solid and stable clean steel structure.
也许只有设计师知道，它实际上是坚实而稳定的钢结构。
The results concluded provides useful information for the production of the clean steel.
所做的研究可以对纯净钢的生产有一定的指导作用。
Theoretical research of applying magnesium's to ultra clean steel production was carried out.
就镁在冶炼纯净钢中的应用进行了理论探索。
This paper analyzes the technology of clean steel production in Japan, from the view of society needs.
从纯净钢生产的社会需求出发，分析了日本纯净钢生产的工艺技术。
It can clean steel, copper, aluminum and ceramic material with high safety coefficient and little corrosion to metal.
可清洗钢铁、铜、铝及陶瓷材料，对金属腐蚀性小、安全系数高。
The technique to produce clean steel and the main technology adopted in the various steps of the production are briefly stated.
阐述了洁净钢生产的技术思路以及各工序中采用的主要工艺技术。
The conclusion is that fluxes and linings with high basicity and proper compositions are important to the production of clean steel.
结论：高碱性、成分、结构合适的中间包覆盖剂及内衬材料是生产高洁净钢的重要条件。
In order to produce the clean steel, some steel grades with special requirement can be produced by LF-VD in No. 3 Steelmaking Plant of Shougang.
为了生产高附加值的洁净钢水，首钢第三炼钢厂利用LF - VD生产一些具有较高要求的特殊钢种。
This paper describes that the work has been done in smelting process and production of clean steel in No. 3 Steelmaking Plant of WISCO during recent years.
介绍了近年来武钢第三炼钢厂在纯净钢冶炼工艺和生产方面所做的工作。
Based on problems present in current smelting processes at Pangang, the technical measures which should be taken for clean steel production were put forward.
根据攀钢目前冶炼工艺存在的问题，提出了生产洁净钢应该采取的技术措施。
The theory and application values are possessed for perfecting the dynamics theory of inclusions growth and optimizing the technique of smelting exceed clean steel.
希望此论文的研究成果对于完善夹杂物生长的动力学理论和优化超纯净钢冶炼技术具有理论意义及应用价值。
The research of new generation steel manufacturing process of steel plant should cover: platform technology for producing clean steel with high efficiency and low cost;
新一代钢铁制造流程的研究内涵应包括：高效率、低成本的洁净钢生产平台技术；
The elimination of inclusions from molten steel before casting into mould using ladle refining operation and tundish metallurgy is the key practice to obtain clean steel.
采用钢包精炼方法把夹杂物消灭在钢水进入结晶器之前是获得“干净”钢水的关键。
The characteristics of products from CSP process are small grain, high strength, clean steel, even properties. The process is suitable to produce high strength steel plate.
薄板坯连铸连轧的产品特点是晶粒细小、强度高、钢质纯净、性能均匀，适宜生产各种高强度钢板。
Our company specializing in the production of the new generation of clear clean appliance: clean cloth, sponge bath cotton cloth, 100 clean steel ball, scrub, large factory.
我司专业生产新一代的清清洁用具：百洁布、海绵百洁布、沐浴绵、刷洗大王、钢丝球的大型厂家。
This paper introduces the development of high quality no - carbon brick for refining ladle and the application in the production of clean steel and ultra - low - carbon steel.
介绍优质无碳砖的研制及其在精炼钢包生产纯净钢和超低碳钢中的应用。
Points out that refining of the clean steel by multi-stages and processes and production of the steel on a large-scale production basis are inevitably the trend of development.
指出多工序分阶段精炼，大规模经济地生产纯净钢是一种发展趋势。
In order to achieve the goal of refining liquid steel and smelting clean steel, using of no-carbon refractory for ladles is very important in iron and steel smelting processes.
在钢铁冶炼工艺中，为了实现钢水精炼和冶炼洁净钢的目的，在钢包上使用无碳耐火材料成为必不可少的重要手段。
Further more, when the samples are deformed at the same temperature, clean steel will get smaller stress increments than that of two commercial steels as the reduction increases.
相同变形温度条件下，变形量增大时高洁净钢的变形抗力增加程度比两种工业钢小。
Effect of technological parameters of controlled rolling and accelerated cooling on the mechanical properties of vanadium bearing microalloyed clean steel have been investigated in this paper.
讨论了在控制轧制和加速冷却条件下，含钒微合金较洁净钢的工艺参数对力学性能的影响。
Predesulfurization of hot metal has become an important task for clean steel production. The final sulfur content is a key index of desulfurization station for capacity and efficiency evaluation.
铁水预处理脱硫是纯净钢生产中的一项重要任务，其中铁水终点硫含量是反映脱硫站能力和生产效果的重要指标。
Ensure that they are clean and place into a fermentation bin. Crush with your clean hands or a sterilized stainless steel/plastic potato masher.
确保它们干净，将它们放进发酵箱里。用你干净的双手或是不锈钢/塑料的捣土豆器弄碎它们。
Ensure that they are clean and place into a fermentation bin. Crush with your clean hands or a sterilized stainless steel/plastic potato masher.
确保它们干净，将它们放进发酵箱里。用你干净的双手或是不锈钢/塑料的捣土豆器弄碎它们。
应用推荐