This guide covers the selection and use of procedures for testing coating powders and powder coatings.
本指南规定了涂料粉末和粉末涂料测试的选择和使用程序。
According to the theory of bionics and powders was used to build a coarse structure onto the surface of the coating, and the hydrophobicity was highly improved.
并根据“荷叶自洁效应”的仿生学原理，利用超微粉在涂层表面构造粗糙结构，提高其疏水性。
Organic Anticorrosive coating The coating are preparation with a series ceramic powders, epoxy resin, modified polyurethane resin, solidification agent and a few additive.
有机耐磨防腐涂料该涂料是由几种耐腐蚀，耐磨损的陶瓷骨料，环氧树脂，改性的聚氨脂树脂，固化剂，及少量添加剂配制而成。
Process for producing polyolefin coating, substrate provided with said coating, and its use for coming into contact with moving powders.
聚烯烃涂层的制造法，有该涂层的底材，及其与移动粉末接触的用途。
Putty and finish two-in-one interior wall coating was preparation by use of re-dispersible emulsion powders prepared in the lab as film forming materials and cement as inorganic binder.
以自制的可再分散乳胶为主要成膜物质，结合水泥水硬性无机粘结剂制备了腻子面漆二合一内墙涂料，重点讨论了可再分散乳胶粉、纤维素醚、粉状憎水剂对涂膜性能的影响。
The properties of the composite powders obtained were determined and the plasma spraying experiments were carried out to examine the properties of coating layers.
测定了所获得复合粉末的性能，进行了等离子喷涂试验，检查了涂层的性能。
Dacromet coating solutions prepared with mixed metal powders are easy to be dispersed with short-time agitation and have good anti-settlement and covering force.
混合处理后的粉末配制的达克罗涂液易分散，搅拌时间短、抗降沉性好、遮盖力强。
The results showed that not only some performance of fire-retardant coating was bettered but also the operating cost was reduced owing to the adding of mineral powders.
结果表明：非金属矿粉的加入，不仅降低了防火涂料的生产成本，而且还改善了涂料的某些性能。
The research shows that Ni(NO3)2 decomposition-hydrogen reduction is a convenient and effective powder coating method for MoS2 powders.
研究表明硝酸镍分解-氢还原法对二硫化钼粉末而言是一种方便和有效的粉末包覆方法。
Ferrite-encapsulated cenosphere powders were prepared by citrate sol-gel method. The additive was used to improve the performance of ferrite coating.
研究了柠檬酸盐溶胶-凝胶方法制备空心微珠-钡、锶、钴镍钡铁氧体复合粉体的微观形貌，采用化学添加剂改善铁氧体的包覆性能。
Wear resistance tests have proved that the wearability of epoxy. Bonding coating is firmly connected with the size and weight of ceramic powders.
通过对M L-100磨粒磨损试验机测试，发现环氧树脂涂层的耐磨性与陶瓷粉末的粒度与含量有密切关系。
The coatings was a solvent suspension consisted of FEVE resin, micro-powders, and promoters. The anti-stick mechanism and designed principle of coating were discussed.
讨论和研究了由该涂料在常温条件下形成的涂层，以及涂层的防粘机理及涂料的配方设计原则。
The coatings was a solvent suspension consisted of FEVE resin, micro-powders, and promoters. The anti-stick mechanism and designed principle of coating were discussed.
讨论和研究了由该涂料在常温条件下形成的涂层，以及涂层的防粘机理及涂料的配方设计原则。
应用推荐