The shape is an important quality criterion of cold rolled strip.
板形是板带的重要质量指标。
Took a research on hydraulic gap control (HGC) system of a cold rolled strip factory.
针对某冷轧薄板厂轧机液压辊缝控制系统HGC进行了研究。
A new method for on-line inspecting the surface quality of the cold rolled strip is put forward.
提出了一种新的冷轧带钢表面质量在线检测方法。
The main process characteristics of cold rolled strip mill train imported for supporting construction are introduced.
引进配套建设的冷轧板带机组的主要工艺技术特点。
The large deflection buckling deformation of cold rolled strip acted on by residual stress is studied by using 3-Power spline function energy method.
采用三次样条函数能量法，对冷轧轧后带材在纵向残余应力作用下的大挠度屈曲变形和临界失稳问题进行了研究。
The quality of cold rolled strip was improved according to the new rolling schedule which was optimized, and the rolling efficiency of the mill was increased.
按新轧制规程生产的冷连轧成品带钢质量获得改善，并提高了轧机的轧制效能。
It points out that the rolling process can be controlled by the parameters affecting the equilibrium, in this way the quality of cold rolled strip can be improved.
生产中可通过控制这些影响平衡的参数来调整轧制过程，从而提高冷轧带钢的质量。
The status and development trend of morden cold rolled strip production technology are introduced in details. Some Suggestions are also put forward on AISC cold rolling strip production.
全面介绍了现代冷轧带钢生产技术的现状及发展趋势，并对鞍钢的冷轧生产提出了一些建议。
This paper analyzes the reasons leading to uneven thickness of cold rolled strip steel, problems existing in AGC control system and component and application prospect of intelligent technique.
分析了冷轧带钢厚度不均产生的原因、A GC控制系统存在的问题及智能技术的构成和应用前景。
The influencing factor of the temper mill on the quality of cold rolled strip is introduced. Measures to improve the quality of cold rolled strip is proposed in light of Masteel 1575 temper mill.
介绍了平整机组对冷轧板带质量的影响因素，并结合马钢1575平整机组，提出了平整机组提高冷轧板带质量的措施。
STRIP: Flat rolled steel used in the forming of cages. Hot or cold rolled to specified thickness, slit to specified widths and wrapped into coils.
钢带：卷起来用于加工保持架的带型钢材。通过热轧或冷轧达到一定的厚度，然后切割成一定的宽度并卷成钢带卷。
The morphology of the surface defects of cold rolled stainless steel strip aud the cause of formation of them have been reported.
本文阐述了不锈冷轧带钢表面缺陷的形貌及其成因，并根据形貌及产生原因归纳成六种表面缺陷。
The surface degree of finish of cold rolled stainless steel strip is controlled generally by surface roughness in production and the roughness lower the degree of finish higher.
在生产中，不锈冷轧带钢的表面光洁度一般用粗糙度进行控制，其粗糙度越低，光洁度越高。
The problem of the first importance in automatically controlling the profile and flatness of cold rolled steel strip is how to measure continuously on the irregularity of elongation in the strip.
冷轧带钢的板形平直度自动控制中，轧后带钢的不均匀延伸的在线连续检测是首要问题。
Stainless steel customers demanding stainless steel in a more finished state such as tubing, pipe, and cold-rolled strip from rerollers and tube makers.
不锈钢客户要求不锈钢的处理尽善尽美，如管子，来自于制管者及再轧机的冷轧带。
The article introduces several types of strip inspection stations to inspect the surface quality of cold-rolled strips.
介绍几种检查冷轧带钢表面质量的检查站。
In recent years, there has been an ever growing market demand for cold rolled stainless strip steel.
近年来，不锈钢冷轧带钢市场需求日益增长。
Cross breaks are formed on the surface of cold rolled and tempered strip during temper rolling, which influence the surface quality and mechanical characteristics of the temper rolled strip.
冷轧退火后的带钢在平整过程中产生横折印缺陷，严重影响平整后带钢的表面质量及其力学性能。
Surface damage of cold rolled aluminum strip was investigated by observation of roiled surface with a scanning electron microscope.
通过对轧后铝板表面的扫描电子显微观察，就冷轧铝板表面损伤进行了探讨。
The shearing machine is one of the most popular single unit equipment in the production of cold rolled steel strip.
剪切机是冷轧带钢生产中使用最广泛的单机设备之一。
The effect of annealing temperature on fibrous texture of cold rolled IF steel sheet rolled from strip hot rolled in ferrite region was investigated.
研究了铁素体区热轧if钢经冷轧后，不同退火温度对丝织构的影响。
The cold bending property is one of the important targets for the hot rolled strip, the cold bending test is required inspection item stipulated in the standards.
冷弯性能是热轧中薄板带材的重要指标之一，冷弯试验是标准规定的必检项目，但在实际生产中经常出现冷弯不合格现象。
Hot rolled strip must be pickled for surface descaling of strip and have good shape prior to cold rolling.
热轧带钢在冷轧前既需要进行酸洗以去除带钢表面的氧化铁皮，也需要有良好的板形。
The reduction rule of cold rolled narrow steel strip by usual method, It's rolled energy consumtion isn't the least usually.
按一般方法设计的冷轧窄带钢压下规程，轧制能耗不一定是最小的。
The characteristics of cold-rolled strip annealing practice have been introduced, and the equipment selection of old-rolled strip annealing has been discussed.
介绍冷轧板带退火工艺的特点，探讨柳钢冷轧板带退火的设备选择。
The production capacity of hot rolled wide strip has already meet the need in China, even maybe overplus. The transfer rate of hot rolled wide strip into cold rolled one and coated sheet is small.
指出我国热轧宽带钢生产能力已能满足国内需求，并可能出现过剩，但转化为冷轧板带和涂镀层板比例太低。
Porosity cluster of cold rolled sheet is transformed from scars, and it is critical to avoid collision for improving the surface quality of hot rolled strip.
避免钢板撞击精轧机组侧导板是消除结疤缺陷提高热轧板材质量关键因素之一。
We specialize in manufacturing and selling cold-rolled precision strip steel, bright strip steel and black strip steel, grilled blue ribbon, and thin-walled tube.
我们专业生产和销售冷轧精密带钢，光亮带钢和黑带钢，烤蓝丝带，和薄壁管。
The mechanism of producing the felting defect of cold rolled coil strip was analyzed.
分析了冷轧钢卷粘结产生的机理。
A cold-rolled strip plate-profile recognition method was presented to improve the detection accuracy based on image morphology processing method.
为了解决冷轧薄板板形识别问题，采用基于形态学的图像处理方法。
应用推荐