It is also helpful to reduce the veining defects using enhanced colloidal silica.
使用快干增强硅溶胶也有助于降低毛刺缺陷。
Structure evolution of both TEOS and colloidal silica in the sol-gel process was studied.
研究了正硅酸乙酯(TEOS)和硅溶胶水解聚合过程中溶胶聚合物分子的生长过程。
The slurry is formed in water with colloidal silica and starch added to flocculate the slurry.
该浆体在水中形成,水添加有硅胶和淀粉以絮凝该浆体。
Silica aerogel is made by drying a hydrogel composed of colloidal silica in an extreme environment.
白炭黑是由凝胶干燥组成硅溶胶在一种极端的环境。
The composition having at least one epoxy resin, at least one solvent and a filler of functionalized colloidal silica.
该组合物含有至少一种环氧树脂,至少一种溶剂和官能化胶态硅石填料。
The Rheological and technological properties of colloidal silica sol sllurry and the influencing factors were studied.
研究了硅溶胶涂料的流变性和工艺性及其影响因素;
Investment casting is an advanced process to produce precision castings and colloidal silica is an important factor that affects the quality of shells.
熔模铸造是生产精密铸件的一种先进工艺,硅溶胶是影响型壳质量的重要因素。
We report herein about the investigation on porous silica coatings prepared from colloidal silica solution on optical glasses and KDP crystal substrates.
本文报道利用二氧化硅微粒胶体溶液在玻璃和KDP晶体基质上制备多孔二氧化硅薄膜。
The optimization has been carried out according to the frequently fracture phenomenon of dehumidification agent colloidal silica in the adsorption system.
针对吸附系统内除湿剂硅胶频繁破碎现象进行优化。
Single stage re-circulation filtrations were performed to remove oversized particles from colloidal silica based Chemical-Mechanical Polishing (CMP) slurry.
单步循环过滤,用来去除胶体硅基化学机械抛光(CMP)磨料中尺寸过大的微粒。
A coat film surface on a substrate is coated with a treatment liquid that is composed of mainly colloidal silica added carbohydrazide as aldehyde capture agent.
在实施有涂装的基材的涂膜表面涂敷在胶态硅石主成分中添加了作为醛捕捉剂的卡巴肼的处理液。
Preparation process of colloidal silica coating and compound shell making technology are introduced. In addition, the application results has been analyzed briefly.
介绍硅溶胶涂料的配制过程及复合制壳工艺,对使用结果作了简要分析。
The technical requirements for the lost pattern made from the paraffin-stearin and the shell mould made from colloidal silica in the precision casting were introduced.
介绍用石蜡-硬脂酸低温模料制作熔模,用硅溶胶作粘结剂制造模壳的工艺。
The experimental results show that the coating has higher strength contained PVA organic binder than con - tained colloidal silica inorganic binder at room temperature.
结果表明,采用pva有机粘结剂的涂料常温强度高于硅溶胶无机粘结剂涂料的常温强度。
The type, characteristics and influence factor of nano colloidal silica product were briefly introduced, and their application in water - bsae wood coatings were illustrated.
简介了纳米胶体硅产品的种类、特性及影响因素,例举了其在水性木器漆中的应用。
Mesoporous carbons(MCs)were prepared by an imprinting method, using mesophase pitch and nanometer colloidal silica solution as carbon precursors and pore generators, respectively.
用中间相沥青作碳源,硅胶水溶液作造孔剂,采用胶体印刻法制得一系列中孔碳。
The measure method of specific surface area and microparticle diameter of colloidal silica by titration with sodium hydroxide was introduced in this paper, which is a simple method.
本文介绍一种简单、方便、快捷的测定胶体硅微粒比表面积、粒径的方法——碱滴定法,适合工厂及研究中使用。
Super-hydrophobic silica-based thin films were prepared by sol-gel processing. Both surface energy and roughness were controlled using colloidal silica particles and fluoroalkylsilane.
溶胶— 凝胶法制备超疏水薄膜,加入胶体二氧化硅粒子和氟硅烷控制薄膜表面粗糙度和表面化学性质。
The aim of this thesis is to select and develop a high efficient scale inhibitor for colloidal silica and silicon scale in water treatment process in order to reduce water treatment cost.
本文以筛选和研制在高硅水中对胶体硅和硅酸盐垢有阻垢作用的阻垢剂,减小硅在水处理过程中的危害为目的。
Specialty Silica Market (Precipitated Silica, Fumed Silica, Fused Silica, Silica Gel, and Colloidal Silica) - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016-2024.
特殊二氧化矽市场-全球产业分析,规模,占有率,成长率,趋势,及预测2016 - 2024年。
On the basis of finding out the reasons for colloidal silica fracture, the bed layer flow speed was decreased through increasing 18.3% of the adsorption column diameter to lead-out a part of tail gas.
在找出硅胶破碎原因的基础上,通过吸附塔直径放大18.3%,引出部分尾气,使床层流速降低。
Polystyrene and silica colloidal crystal multilayers with controlled thickness are fabricated quickly by the vertical deposition method at certain temperature and humidity.
通过控制温度和湿度,用垂直沉积法快速制备出了不同厚度的高质量二氧化硅和聚苯乙烯胶体晶体薄膜。
In-situ colloidal forming of ceramics is the most promising method in making the near-net-shape and complicated ceramics, to which silica and alumina sol have been widely applied.
陶瓷原位胶态成形方法是制备近净尺寸复杂陶瓷部件最具应用前景的方法,硅溶胶、铝溶胶也越来越多的应用于其中。
In-situ colloidal forming of ceramics is the most promising method in making the near-net-shape and complicated ceramics, to which silica and alumina sol have been widely applied.
陶瓷原位胶态成形方法是制备近净尺寸复杂陶瓷部件最具应用前景的方法,硅溶胶、铝溶胶也越来越多的应用于其中。
应用推荐