The full stress design of a cantilever beam under a combined load is discussed.
讨论了悬臂梁在联合载荷作用下满应力截面设计问题。
The proposed method for analyzing combined load flow is proven through a case study.
算例分析证明了本文所提出的用于分析混合负荷方法的收敛性和有效性。
Taper roller bearings are generally used to support combined load mainly consisting of radial load.
圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。
Tapered roller bearings are generally used to support combined load mainly consisting of radial load.
轴承主要用于承受以径向载荷为主的径向与轴向联合载荷。
Tapered roller bearings are generally used to support combined load mainly consisting of radial load .
轴向载荷能力非常大,在承受轴向载荷的同时还可以彻骨你受干径向载荷。
Some part of the casing reaches plastic range in the combined load state and the casing may be cracked under 1.5 times of the combined load.
在组合载荷下机匣局部出现塑性,在1.5倍组合载荷作用下机匣可能发生破坏。
Tapered roller bearings are generally used to support combined load mainly consisting of radial load. Their cups are separable for easy assembling.
圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷:外圈可分离,组装容易。
Calculates the load distribution in a tapered roller bearing under combined loads, and analyzes the effect of misalignment on the loads in a tapered roller and raceways.
通过计算承受联合载荷的圆锥滚子轴承负荷分布,分析了在不同偏斜状况下圆锥滚子及滚道受力的变化趋势,总结出偏斜对圆锥滚子轴承受力的影响。
By solving its stability different ial equation using Kayleighs quotient, the critical load calculation method for this type of paling acted on combined load was proposed.
应用瑞利商求解其倾覆稳定微分方程,给出了组合荷载作用时栅条稳定临界荷载计算方法。
Concerning anulus failures such as fissures and disc prolapses, the mechanical response of the intervertebral disc during combined load situations is still not well understood.
关于像脑裂和椎间盘突出时的环纤维,椎间盘在联合负荷状态下的反应机制目前尚不清楚。
The combined load cases were encountered which were not suited for working of fatigue machine during simplification of simulative specimens which were simplified from the full scale titanium frame.
由全尺寸框向模拟试件简化过程中 ,遇到复合载荷工况 ,而这种复合载荷不适合在疲劳机上进行加速试验。
These combined tests were typically run under higher load than in earlier iterations and also run for at least twenty-four hours.
比起较早的迭代,这些组合的测试一般在较高的负载下执行,并且还至少执行二十四小时。
Combined with dynamic discovery, sophisticated load balancing and failover designs can be developed.
将之与动态终结点搜索相结合,可以开发成熟的负载均衡与故障转移方案。
As already mentioned, the LOAD FROM CURSOR operation combined with the federated access requires more effort in terms of configuration than the approach that is presented next.
正如前面提到的,与方法2相比,结合使用LOADFROM CURSOR操作和联邦访问需要做的配置工作比较多。
The above optimizations combined with ImageBundle, described below, make it possible for GWT-based applications to load surprisingly quickly.
上述优化再与下面介绍的ImageBundle结合,能使基于GWT的应用程序获得令人惊讶的加载速度。
Initial batch load combined with periodic delta batch updates, such as nightly.
初始批量装载和定期的(比如每天晚上)增量数据批量更新相结合。
While AIXPCM doesn’t offer a "load balancing" attribute, load balancing using the AIXPCM can be accomplished through a "round_robin" algorithm, combined with user-customizable path priorities.
当AIXPCM 不能提供一个 “负载平衡”属性时,使用 AIXPCM 的负载平衡可通过一个 “round_robin”算法、结合客户自定义路径优先性来实现。
This method utilizes some of non-dimensional parameters and combined parameters, in order to interrelate the bearing load with parameters of working process and structure of a diesel engine.
本方法是利用了一些无因次参数及综合参数,使轴承负荷同柴油机工作过程及结构的某些参数联系起来。
The problem of bending of rectangular plates with rest-on edges under the combined action of concentrated load with uniform distribution load has been discussed.
本文讨论在集中荷载和均布荷载联合作用下搁支矩形板的弯曲问题。
According to fatigue damage accumulation theory, test load of verified fatigue test on rail across beam and welded connections with integral joint of combined steel truss bridge was gotten.
依据疲劳损伤累积理论,确定了公轨两用钢桁桥轨道横梁与整体节点连接头验证性疲劳试验的试验荷载。
This method can be used to analyze accurately the complete load-deformation response of RC beams loaded in combined shear, moment, and axial load.
该法可以对在弯矩、剪力和轴力共同作用下的钢筋混凝土梁截面进行较为准确的荷载-变形反应全过程分析。
From analysis of combined needle roller bearing, the estimating formula of basic dynamic load rating for above bearing is derived.
从滚针组合轴承结构分析着手,推导出滚针组合轴承的基本额定动负荷估算公式。
Combined the curve theory of differential geometry and the cable model applied distributed load, form analysis and tension analysis of boundary cable, ridge cable and valley cable were performed.
结合微分几何的曲线论和分布荷载作用下索的受力模型,研究了索膜结构中边索、脊索和谷索的受力分析和形状分析。
After one-step-ahead prediction, the predicted results of these signals are combined into the final predicted result of the original load series.
然后分别对各信号进行一步预测并组合预测结果,获得原始负载的最终预测。
Based on the united data mining techniques, a new method of optimum combined forecasting of power load is suggested.
提出了基于联合数据挖掘技术的电力负荷优选组合预测方法。
This paper introduces the automatic control circuit time in turn driven by inverter with the using and the reserved load and combined switch connection.
介绍变频器驱动一用一备负载的自动定时轮换控制电路及组合开关联接。
The combined sections method overcomed the disadvantage of method only considering active or reactive load and improved the accuracy.
这种组合分段的方法克服了仅按照有功或无功分段的缺陷,提高了控制的准确性。
The combined use of ABS System & Load-Sensing Proportion Valve is an effective brake pressure regulation method which has high reliability.
综合考虑ABS系统与感载比例阀组合使用是行之有效的,且是可靠性高的制动压力调节方法。
The combined use of ABS System & Load-Sensing Proportion Valve is an effective brake pressure regulation method which has high reliability.
综合考虑ABS系统与感载比例阀组合使用是行之有效的,且是可靠性高的制动压力调节方法。
应用推荐