The size and velocity of the droplets change continuously during their entrainment and acceleration in the hot gas combustion flow.
大小和速度的液滴不断变化的期间，夹带和加速度在炎热的气体燃烧流。
In the afterburner, the complicated temperature distribution has close relation with the dilution, combustion and flow of the air and gas.
补燃室内复杂的温度分布和空气与燃气的掺混、燃烧及流动状态有密切关系。
The experiment quantitatively verifies the existence of convection flows of gas induced by the gradient magnetic field, furthermore the convection flow promotes the combustion in diffusion flames.
实验定量地验证了梯度磁场可以诱导气体对流的发生，从而进一步推进扩散火焰燃烧反应。
The combustion gas flow was analyzed, the velocity and temperature distributions were calculated according to this model, the results fitted well with the actual flame.
在此基础上进行了喷枪内外燃气流场分析，结果表明，燃气温度分布、速度分布与实际焰流有较好的一致性。
The catalytic combustion technique of the flow direction alternation is a latest research subject, which is about how to purify poisonous waste organic gas.
流向变换强制周期操作催化燃烧技术是我国引进的最新的净化含有有毒有机物废气的研究课题。
The BZR is a precise gas flow control regulator for all combustion systems. Used with Proportional Mixers, Nozzle Mix Burners, positive or negative furnace pressures etc.
BZR是一种适合所有燃烧系统的燃气流量控制调节器，和比例混合器，内混烧嘴，正负炉压等一起使用。
A turbulent combustion of hydrocarbon fuel-rich gas with air two-dimensional supersonic shear flow was numerically simulated.
数值模拟碳氢富燃燃气与空气二维超声速剪切流动的湍流燃烧。
The model of three-dimensional flow in circular bend tube which is widely used in gas exchange system of internal combustion engine is developed in this paper.
建立了内燃机换气系统普遍使用的弯曲圆形管道气体流场计算的三维模型及有关边界条件。
In 7, supply system: the compressor gas, by adjusting the pressure and flow of filtered and dried into the combustion tube;
供气系统：采用压缩机供气，通过调节压力和流量经过滤和干燥后送入燃烧管内；
The processes of fluid flow in the tube, combustion, heat transfer between the flue gas and tube were simulated without any simplification of the complicated geometry.
计算得到了炉内流场、 温度场及炉管表面热流密度分布的详细信息，揭示了焦化炉炉膛内流动、燃烧和传热过程的特性。
Through the orthogonal experiments, the author found out the major factor affecting the combustion and thermal characteristics from the gas pressure, water flow, air-inlet area and fume-exhaust area.
本论文通过正交实验从燃气压力、水流量、进风口面积和排烟口面积这四个因素中找出了影响强制平衡式燃气热水器的燃烧和热工特性的主要因素。
The gas flow and fuel spray status in combustion chamber are two important factors which affect the mixture formation in diesel cylinder.
而气缸或燃烧室内的气流运动和燃料的喷雾特性，是影响柴油机混合气形成和燃烧过程的两大重要因素。
The results presented in this paper may provide valuable reference for the optimization design of the gas-gas injector for full flow staged combustion cycle engine.
所得的结论对全流量补燃循环发动机气-气喷注器的优化设计有一定的指导意义。
The method for setting up the radiant coefficient is put forward to solve the infrared radiation temperature measurement problem for motor combustion gas flow field.
提出了解决发动机燃气流场红外辐射测温时辐射系数设置的方法。
The processes of fluid flow, combustion and heat transfer between the flue gas and tube without any simplification in the firebox of atmospheric heater were studied with the whole coupling method.
采用分区耦合的方法研究了常压加热炉辐射段内的流动、燃烧和管内外传热的工艺过程。
The invention relates to a method and a device for measuring the temperature of an exhaust gas flow in an exhaust line of an internal combustion engine.
本发明涉及一种用于测量内燃机的排气段中废气流温度的方法及装置。
A gas flow separator near the fuel inlet forms one or more smaller volumes within the combustion chamber where the fuel can mix and burn with only a portion of the air introduced into the chamber.
燃料入口附近的气流隔离器在燃烧室中形成一个或者多个更小的容积，在此处燃料可以与引入燃烧室中的仅仅一部分空气混合并燃烧。
For the numerical simulation and mechanism modeling of combustion system involve the gas-solid flow principle, existing models are to complex to be suitable for design and optimizing of CFB unit.
循环流化床锅炉燃烧系统的数值模拟和机理建模涉及到对气固两相流方式下燃烧过程的理解和描述，已有的机理模型都十分复杂，不适合用于现场控制系统设计和优化。
For the numerical simulation and mechanism modeling of combustion system involve the gas-solid flow principle, existing models are to complex to be suitable for design and optimizing of CFB unit.
循环流化床锅炉燃烧系统的数值模拟和机理建模涉及到对气固两相流方式下燃烧过程的理解和描述，已有的机理模型都十分复杂，不适合用于现场控制系统设计和优化。
应用推荐