Design communication interface software of upper computer.
上位机通信接口软件的开发。
Interactive function software with Chinese suggestion, device drive interface software and communication interface software are devised in EISC STUDIO development environment.
基于EISCSTUDIO开发环境，研制中文提示和交互式操作软件、设备驱动接口软件、通信接口协议软件。
A good user interface facilitates effective communication between the user and the software.
一个好的用户界面应该能够有助于用户和软件之间的有效通信。
It is a communication standard for a user interface interaction with its own ecosystem and can become the hub of communication in a software development environment.
它是一种用户界面交互通信标准，也可以作为软件开发环境中通信的标准。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
In the view of the control system, the paper discuss hardware architecture, software architecture, interface architecture, data communication, and servo control system.
文章从系统角度讨论了卷簧机数控系统的硬、软件构成，界面结构，数据通讯及伺服控制。
The principle of users programming for field communication protocol and the development of the software for graphics-oriented programming interface are described.
本文论述了现场通信协议用户可编程的原理，以及面向图形的可编程界面软件的开发。
IT also USES MFC based on dialog programmer model to design the software of mutual interface. Finally IT realizes the wireless communication between air vehicle and ground.
采用MF C中基于对话框的程序设计模式设计了交互界面的软件，实现了空中运动体与地面控制站之间的无线通讯。
The IPC-based control software consists of man-machine interface application program, communication program between IPC and PMAC, motion programs and PLC programs.
基于ipc机的控制软件主要包括四个部分：人机界面应用程序、上下位机通讯程序、运动程序和plc程序。
An idea of dual network SCADA system is proposed and the function design, implementation method and programming interface of dual network communication software are introduced.
提出了采用双网络结构的思想，并详细介绍了双网络通信软件的功能设计、实现方法及编程接口。
The field communication software I developed shields the discrepancies in all kinds of device communication methods, providing a uniform communication interface for applications.
所开发的现场通信软件屏蔽了各种设备通信方式的差异，为应用程序提供统一的通信接口。
The software part of the interface includes basic information management system of nc tool and multiple serial port communication etc.
该接口软件部分主要包括串口通讯、数控机床基础信息管理等功能模块。
IBM PC and single chip microcomputer communication hardware circuit, software interface and measure to improve reliability of communication.
IBMPC机与单片机通讯的硬件电路、软件接口以及提高通讯可靠性的措施。
Two methods of communication between DCS and IPC designed method of real time control dynamic database and the function of man-machine interface in integrated software platform have been analyzed.
分析了二种DCS与IPC的通讯方式，实时控制动态数据库的设计方法，以及集成软件平台人机交互界面的功能。
The online simulation system software includes of the real-time simulation support software, the system communication software, the simulation program and the simulation interface software.
软件部分主要由实时仿真支撑软件、仿真计算模型软件、系统通讯软件、在线仿真界面软件等组成。
The author designs a software of communication based on the communication interface RS485, and shows the flow chart of the main program.
作者利用通信接口rs485设计编制了一套通讯软件，给出了主程序流程图。
Charper Four introduces the popular communication interface: CAN Bus and USB. It includes the software and hardware's designing of the communication interface, and the preliminary debugging.
第四章对CAN总线和USB通信接口进行了探讨，设计了通信接口的软件和硬件，并进行了初步的软硬件调试。
The paper discussed the hardware, software and the pretreated circuitry of the system, expatiated the interface circuit and communication mode between AD and DSP.
论述了该系统的软硬件设计以及预处理电路，详细阐述了AD和DSP的接口电路以及通信方式。
This thesis researches and designs a cluster management software with an external communication interface, which can be used smoothly to build the hot spare of bill record collection system.
本论文研究和设计的具有外部通信接口的双机管理软件，能很好的解决该问题。
It next analyzes the requirements of the software platform in detail, including the communication interface, test logic aiming at various test projects, and the interact interface.
其次详细分析了软件平台的各种需求，包括通信接口、针对各种测试项目的试验逻辑和交互界面。
Discussed in detail the DSP's host interface HPI, to design the hardware connection circuit and communication software.
详细讨论了DSP的主机接口hpi，为其设计了硬件连接电路和通信软件。
For the software design, it's composed of three modules: CAN bus equipment interface communication module, purify gateway protocol transform module and Ethernet application module.
软件设计分为三个模块：CAN总线设备接口通信模块、透明网关协议转换模块和以太网层应用模块。
Meanwhile the manipulate interface is designed and communication method between PC and PLC is analyzed, related software is developed.
设计了控制界面，分析了上下位机的通讯方式，并开发了相应的通讯程序。
To be more specific, the detailed data transfer agreement and the interface software plan for CAN bus communication are discussed on the basis of aluminum reduction requirements.
根据铝电解生产的特点详细讨论了传输的数据约定协议，给出了CAN总线通信接口软件设计方案。
This kind of software includes the interface, i. e. the instrument panel, communication functions, and parametric database.
一般的测控系统软件主要由界面（仪表面板）、通信、参数数据库组成。
For better communicating with other communication device, convenient operation, improving control effect, upper computer and VQC software is adopted, it make man-machine interface more friendly.
为了更好地与电力系统其他装置通信、便于操作、优化控制效果，引入了上位机和VQC软件，使人机界面更加友好。
For better communicating with other communication device, convenient operation, improving control effect, upper computer and VQC software is adopted, it make man-machine interface more friendly.
为了更好地与电力系统其他装置通信、便于操作、优化控制效果，引入了上位机和VQC软件，使人机界面更加友好。
应用推荐