The Metal Matrix composites, prepared by in-situ reaction composite technology, can normally achieve higher mechanical properties than other traditionally prepared composites under the same condition.
利用原位反应合成法制备金属基复合材料，在同等条件下，其力学性能一般都高于强制法制备的复合材料。
Nano-scale composite ceramic coating on Q235 was fabricated by thermochemical reaction method, and then structural analysis and performance test were conducted of the coating.
采用热化学反应法在Q235钢上制备纳米复合陶瓷涂层，对涂层进行结构分析及性能测试。
It showed that the composite supporters, the catalyst component and the reaction conditions could have great influence on the target reaction.
实验结果表明，复合载体、催化剂组成、反应条件均对目标反应产生较大的影响。
The influence of reaction temperature, neutralization degree of acrylic acid and amounts of crosslinking agent, initiator, dispersant and kaolin on the absorbency of the composite was discussed.
研究了加入高岭土的聚丙烯酸钠复合高吸水性树脂合成中反应温度、中和度、交联剂用量、引发剂用量、高岭土添加量等影响树脂吸水性能的主要因素。
The dental pulp reaction will appear in different degree after the light curing composite is filled.
光固化树脂充填后可能出现不同程度的牙髓反应。
The different distribution of pile reaction between pile groups composite foundation and composite pile foundation are studied, and some reasons are given.
研究了多桩复合地基与多桩复合桩基在桩顶反力分布上的不同，分析了出现差别的原因。
In automotive and chemical industries, it usually requires high-performance cylinders to complete the media storage, transport and reaction, and composite cylinder is one of the options.
在汽车和化工等领域，常需要使用高性能的气瓶完成介质的储存、运输和反应等过程，复合材料气瓶就是其中之一。
The equilibrium compositions of composite pellet reduction as a complex system composed of multi component, multi phase and multi reaction were simulated by HSC software.
运用HSC软件对复合球团构成的多元、多相复杂体系进行还原平衡成分计算机模拟。
The composite nanocrystalline of mullite was prepared via hydrothermal reaction of calcined kaoline. It was observed that growth of the nanocrystalline grain was good in TEM.
煅烧处理过的高岭土经水热反应后得到纳米级莫来石复合晶体，TEM观测到其晶粒发育良好。
Moreover, the reaction during the synthesizing of the composite coating was characterized by step-step reaction, and it proceeded even after the droplets reached the substrate.
复合粉体反应形成涂层的过程是分步进行的，而且在熔滴到达基体后部分反应仍继续进行；
Laser Induced Reaction Welding (LIRW) technique is employed for SiC particulate reinforced Al based composite to produce joints.
将激光焊接技术用于碳化硅颗粒增强铝基复合材料的焊接。
The effects of concentrations of aniline, oxidizing agent, doping agent, and the reaction temperature and period on the conductivity of the composite fiber were discussed.
讨论了氧化剂与苯胺的初始摩尔比、苯胺单体浓度、掺杂酸浓度、反应温度及反应时间对纤维导电性能的影响。
This paper studies the possibility of using nickel-nickel sulfide composite coating obtained by electrodeposition as the active cathode material for hydrogen evolution reaction in alkaline solution.
对用电沉积法获得镍-硫化镍复合沉积层作碱性溶液中析氢活性阴极材料的可能性进行了研究。
A series of supported copper, cobalt and copper-cobalt composite catalysts were synthesized by solid state reaction, and used for the deep catalytic oxidation of o-xylene.
采用低温固相法制备了系列负载型铜、钴以及铜钴复合催化剂，用于邻二甲苯的深度催化氧化，以邻二甲苯的分解率和二氧化碳产率综合评价催化剂的活性。
The corrosion test, impact test and reaction-to-fire test results show that the stratified composite slabs have excellent corrosion resistant, toughness and firer…
对过渡层研究结果表明，复合面层与混凝土基材间的粘接性优异。
The composite carbon material is prepared with natural graphite, and through coating reaction for many times with carbon material to reach coating rate of 100 %.
本发明的碳复合材料由天然石墨经过多次包覆反应而制备获得，其天然石墨被碳材料包覆达100%。
A Laser Induced Reaction Welding (LIRW) technique is employed for SiC particulate reinforced Al based composite to produce joints.
将激光焊接技术用于碳化硅颗粒增强铝基复合材料的焊接。
The results showed that heat absorbing by the media affects the reaction speed more effectivly than heat radiation. Cool sand is the best media to manufacture the composite barrel.
试验表明，传导吸热对SHS反应速度的影响要比辐射散热更明显：冷砂保温冷却方式是制备有一定厚度的致密的陶瓷内衬喷枪的最佳工艺。
The results showed that heat absorbing by the media affects the reaction speed more effectivly than heat radiation. Cool sand is the best media to manufacture the composite barrel.
试验表明，传导吸热对SHS反应速度的影响要比辐射散热更明显：冷砂保温冷却方式是制备有一定厚度的致密的陶瓷内衬喷枪的最佳工艺。
应用推荐