To introduce the software structure of computer process control system for LD converter of Baotou ironand Steel Corporation.
介绍了包头钢铁公司转炉炼钢过程控制级的软件结构，详细地说明了应用软件、基础软件。
The computer simulation result shows that this algorithm is simple and useful, and can be available for computer process control system to improve the control character.
计算机仿真结果表明，该算法简单实用，控制效果较理想，适宜于采用计算机的过程控制系统。
After analyzing the process of the computer room management and studying some Cyber-Cafe management system, the concept framework of the computer room monitor and control system was gained.
作者在对机房微机管理过程进行了详细调查后，参考了一些网吧的微机管理系统，获得了机房监控系统的设计思路。
Optimization is a technique of improving a process control systems computer program, etc in an attempt to achieve the best possible result.
优化是一种用于改进过程、控制系统、计算机程序等，以便力求获得最好的可能结果的技术。
Methods The computer control was adopt and based on operational process to design system functional modularization.
方法：采用计算机控制，根据操作流程进行系统功能的模块化设计。
Computer skills - Process control system.
计算机过程控制系统技能。
Process accuracy, reliability and repeatability are guaranteed by the automatic computer control system, resulting in much higher consistency of production and much better film quality.
计算机自动控制保证了的镀膜过程的精确控制、可靠性和重复性，从而导致更高的生产一致性和膜层质量。
Operate the physical-chemical and the biological w. w. t. plant by computer aided process control system (visualisation).
通过可视化计算机辅助过程控制系统操作物化废水处理系统。
The reheating furnace process computer system goals are mainly dynamic production process control, process operation records tracking, and production process optimization with metallurgy model.
再加热炉过程控制计算机系统的主要目的是实现生产动态过程控制，跟踪操作记录，同时通过冶金模型进行生产过程优化。
This system not only remedied the function defects of the traditional fluorescence microscope, but also realized the computer control and the process and spectral analysis of the fluorescence image.
本系统不仅弥补了传统荧光显微镜的功能缺陷，而且实现了系统的计算机控制及荧光图像的处理、光谱分析等功能。
The operator's operation through observing artificially floatation froth has not met the computer control requirement in flotation process.
浮选工业过程由人工观测泡沫来进行现场操作已经不适应浮选过程计算机控制的需要。
This paper gives a method that takes the 8031 type singal -chip computer as central processor to control the process of the fast data acquisition and data processing for high frequentcyy signals.
本文介绍了一种采用8031单片机作中央处理器，实现对高频信号的快速数据采集过程的控制，并能对所采集的数据进行处理。
The topic of this graduation project is: Two grades computer Carburization process Distributed Control System.
本次毕业设计的题目为：两级计算机实现的渗碳过程集散控制系统。
This method is applied in the computer control of experiment facility for process control.
该方法在过程控制实验装置的计算机控制中得到应用。
As a computer control algorithm, Model Predictive Control (MFC) has many successful applications in industry control process and has become an important advanced process control strategy.
模型预测控制作为一种新型计算机控制算法，在工业控制界取得许多成功应用，现已成为一种重要的先进控制策略。
Based on analyzing synthetically the application and technical status of the computer control of thermal process in reheating furnace, the paper predicts its developing trend.
综合分析了近年来加热炉热过程计算机控制的应用情况、技术水平及发展趋势，供该技术的开发和研究者参考。
Finally, some proposals on research and design of communication network for process computer automatic control system are offered.
最后，对计算机过程控制系统的通讯网络试制研究提出些建议。
A computer system controls the motion and power pulse of whole process by intelligence control theory.
一种基于智能控制理论的计算机系统控制整个处理过程的运动和电源脉冲。
The fault types and fault diagnostic process of the automobile computer control system are offered here. The methods to confirm, analyze and diagnose the faults are also expounded.
给出汽车计算机控制系统的故障类型和故障诊断流程，阐述故障确认、故障分析、故障确诊的方法。
This type of system control software, computer interface, the computer recording and displaying the testing process and result.
该型含系统控制软件、计算机接口，可在计算机上全程记录和显示测定过程和结果。
This system consists of control cell, sensor, mathematical model, control algorithm, and computer and technological process.
本系统由控制单元、传感器、数学模型、控制算法、计算机及工艺过程组成。
It is a computer control system for whole process. The drive of main-motor USES digit controlled drive.
该系统在生产全过程中实现计算机控制，主电机传动采用数字控制传动装置。
An operation where the computer applies control action directly to the process without manual intervention.
计算机直接向生产过程发出控制动作而无需进行人工干预的一种运行方式。
The system is controlled by computer, realizing the all flow control process through "one-key" operation.
该系统由电脑控制，实现了“一键式”作业全过程流程控制。
Computer control is of great importance in the melting process.
将微机应用于其熔炼过程控制具有非常重要意义。
The computer control process is realized.
可实现注射过程的计算机控制。
Process equipment Computer control technology is a core course of process equipment and control engineering specialty and alike with great practice, whose experiment teaching is very important.
过程装备计算机控制技术是过程装备与控制工程、测控技术与仪器专业的一门实践性很强的课程，其实验教学环节非常重要。
The basic principle is that computer storage procedures and process control.
计算机的基本原理是存贮程序和程序控制。
It can customize work process by specification and realize computer assistant control.
系统可以依据特定的规范定制工作流程，实现计算机的辅助控制。
It can customize work process by specification and realize computer assistant control.
系统可以依据特定的规范定制工作流程，实现计算机的辅助控制。
应用推荐