A new kind of hydraulic high-speed on-off valve with giant magnetostrictive actuator and cone valve structure is presented.
介绍了一种新型的液压高速开关阀，它采用了超磁致伸缩驱动器和锥体式阀芯结构。
After the Kongdong reservoir water hole plate gate rebuild into a cone valve, the stilling basin, model test was conducted.
对崆峒水库输水洞平板闸门改建为锥形阀后的消力池进行了模型试验研究。
The hydraulic cartridge cone valve is chosen for the study of possibility to explore its effects of geometry parameters and boundary condition on flow field and cavitation of cone valve.
以插装型液压锥阀为研究对象，研究了几何结构参数及边界条件对锥阀流场及气穴现象的影响。
It can be concluded that cavitation of hydraulic cartridge cone valve is reduced by increasing the opening stroke and the outlet pressure and changing the geometrical structure of valve spool.
研究表明：增大阀口开度，增大出口压力，并对阀芯结构进行修改后，插装型液压锥阀阀口气穴现象均可有效减弱。
Compared with the experimental data, the simulating results show that the proposed model is reliable and can be applied to the numerical simulation of turbulence flow around the fixed-cone valve.
数值模拟结果与试验资料的比较分析表明两者吻合较好，从而验证了该模型在锥阀湍流模拟中的可靠性。
Medium pressure increases toward the valve seat surface and oblique cone sealing surface squeeze is tightening, sealing the better.
正向介质压力增大时阀板斜圆锥表面与阀座密封面挤压越紧，密封效果越好。
Medium pressure increases toward the valve seat surface and oblique cone sealing surface squeezed more tightly, sealing the better.
正向介质压力增大时阀板斜圆锥表面与阀座密封面挤压越紧，密封效果越好。
Along with the standard Red Valve sleeve, we offer Double Wall (DW), Reduced Port (RP), and Cone sleeves for special applications.
作为美国红阀公司的标准配置，我们可以提供双层(DW)，缩小流道(RP)，以及锥形套管以满足特殊需求。
Cone air lock valve can realize to discharge dust with the help of torque balance.
锥形锁风阀利用力矩平衡的方法实现卸灰。
Fluid control one-way valve used cone disc, sealed a good performance.
液控单向阀采用锥形阀芯，因此密封性能好。
Valve seat plate and the sealing surface for the oblique cone structure, in the oblique conical surface of valve plate welding temperature, corrosion resistant alloy material;
阀板与阀座的密封面为斜圆锥结构，在阀板斜圆锥表面堆焊耐温、耐蚀合金材料；
The device by the human operator launches, such as through the cone-shaped gear reducer drive, direct drive valve stem up and down movement of the valve gate.
本装置由人力操作手轮，通过锥形齿轮等减速传动，直接驱动阀门阀杆上下移动，启闭阀门。
A new device for measuring run out error of needle valve seat′s cone surface is proposed. The calculating and estimating methods of the error are also described in the paper.
推出了一种新的针阀体座面圆跳动误差测量装置，介绍了误差的计算与评定方法。
The efficient-cone type floating valve with unchanged overall dimensions and superior adaptability to the F1 floating valve was introduced.
介绍了一种外形尺寸不变而综合性能优于F1俘阀的高效锥型浮阀。
Took to the traditional process improvement, proposed one kind in view of the tire valve cone-shape packing surface trundle processing method.
作为对传统工艺的改进，提出了一种针对气门锥形密封面的滚压加工方法。
Xuan Sefa a cone-shaped pieces of the hoist and around the center line perpendicular to the axis of rotation pipeline, completed the hoist valve action.
的启闭件呈锥形，并绕垂直于管道中心线的轴线旋转，完成阀门的启闭动作。
Through its analysis of hydraulic performance, the cone-way valve can work well when hydraulic loss is very small, and we can get the change rule of the fluid pressure and the speed .
通过对其水力性能的分析， 表明该阀可在极小水力损失情况下正常工作，并得到了该阀阀板前后部流体压力及速度变化规律。
In view of condensate delivery pump extremely high cavitation performance request. wo proposed one kind of new hinge type cone-way valve and expounded the principle of its work.
针对冷凝液输送泵极高汽蚀性能的要求，提出了一种新型铰接式单向阀，阐述了其工作原理。
In view of condensate delivery pump extremely high cavitation performance request. wo proposed one kind of new hinge type cone-way valve and expounded the principle of its work.
针对冷凝液输送泵极高汽蚀性能的要求，提出了一种新型铰接式单向阀，阐述了其工作原理。
应用推荐