FPGA functional test platform is composed of configuration circuit, a power circuit and I/O interface circuit.
FPGA功能测试平台由配置电路、电源电路和I/O接口电路构成。
By adjusting parameters in CPLD of data receiving circuits, we can implement configuration of all kinds of digital interface devices, which makes the circuit control simpler, neater and more reliable.
通过对数据接收电路CPLD内部参数的调整，可以实现对各种数字接口器件的配置，从而使得电路控制更加简单、灵活与可靠。
The method includes configuration design, sensor and testing circuit design, controlling system design and software design.
其中包括了结构设计、传感器及其测量电路设计、控制系统设计及软件设计。
Main circuit configuration and integrated voltage-reactive power control scheme for balancing compensation with cascade inverters based STATCOM is proposed.
给出了采用链式STATCOM实现平衡化补偿的主电路结构及电压-无功综合控制方法。
For example, memory circuit 515 can store configuration bits in a field programmable gate array, where one of the configuration bits is used to generate the select signal.
例如，存储器电路515可在现场可编程门阵列中存储配置位，其中一个配置位用于生成选择信号。
This article describes the hardware configuration, the circuit of data acquisition device and its principle, and the software design of the acquisition system as well.
文章介绍了该系统的硬件配置、数据采集器电路结构和原理以及采集系统的软件设计。
In this paper, a simple "cancelled type" PCRG (Piezocrystal rate gyro-scope) is described. Its essential performance and its circuit configuration are also outlined.
本文介绍了一种简单的“抑制型”压电晶体速率陀螺，概述了它的电路结构和主要性能。
The flow diagram of inert gas system, the circuit configuration of major hardware and software design are detailed in the paper.
文中详细介绍了惰性气体发生系统的流程图，主要硬件电路结构和软件的设计。
The feedback configuration of this circuit should be voltage parallel negative feedback.
该电路的反馈组态应是电压并联负反馈。
Two kinds of main circuit configuration and integrative voltage reactive power control scheme for balancing compensation with single phase STATCOM are proposed.
提出了采用单相statcom实现平衡化补偿的两种主电路结构及电压无功综合控制方法。
The configuration program of incoming loop, bus coupler circuit, feeder circuit, motor circuit, reactive power compensation and the control power in switchgear was described.
阐述了开关柜中受电回路、母联回路、馈电回路、电动机回路、无功补偿和控制电源的配置方案。
This circuit has simple configuration, stabilization, high precision, which was verified by the test.
该电路结构简单、稳定、精度高，通过具体的试验对电路设计进行的验证。
This system had the merits of small volume, few of hardwares, circuit configuration simple and easy to operate, and so on.
本系统具有体积小、硬件少、电路结构简单及容易操作等优点。
Paper analyzes the mechanism of zero temperature coefficient reference, and modifies the classical configuration to deduce the circuit which can be used in practice.
主要分析了获得零温度系数的参考电压的机理，通过分析修改其经典结构，给出了可以应用于实际的带隙基准源模型。
According to fully understanding PS configuration timing, AT89C51 simulates and realizes PS configuration timing, and the system realizes the technology of FPGA circuit reconfiguration.
在充分了解FPGA的PS配置模式时序的基础上，用单片机at89c 51模拟实现PS配置时序，从而实现FPGA电路重构技术。
The same circuit size configuration ensures compatibility and mate ability.
相同的电路规模配置可确保兼容性和配合性。
The rational magnetic circuit configuration and magnetic density are crucial factors in magnetorheological finishing(MRF).
合理的磁路结构及磁场强度是决定磁流变抛光效果的关键所在。
Accordingly, the circuit configuration of fader device is simplified.
由此简化衰减器装置的电路结构。
This paper proposed a new current-mode OTA-C network configuration, the high-order current transfer function are realised on the circuit.
提出了一种新的电流模式OTA-C网络结构，由此实现了高阶电流传递函数。
This thesis simply introduces the operation principle and system configuration of SAPF, and describes the design method of main circuit in detail.
本文简单介绍了SAPF的工作原理、系统结构，详细阐述了主电路的设计方法。
By analysis the resonance parameters, the relation between resonance parameter and circuit configuration can be achieved which is helpful to optimize the circuit design.
通过分析其谐振电路参数，可以获得谐振参数与电路参数之间的关系，从而有利于优化设计此电路。
The hardware circuit of serial communication, PLC system configuration and the anti jamming measure are also introduced.
还介绍了串行通信的硬件电路、PLC系统设置和系统抗干扰措施等。
The memory system configuration, fault-tolerant technique and support circuit of the imported ATC simulated system have their unique adv…
本文就其存贮系统的结构、容错技术及支持电路这三部分予以说明和论述，仅供同行参考。
The passive serial configuration of FPGA is controlled by CPLD. EPROM is selected to store the configuration program. It can improve encryption of the CNC system, and simplify the circuit.
该方法由CPLD控制配置过程，EPROM存储配置文件，实现了FPGA的被动串行配置，增强了数控系统的保密性、简化了系统电路。
Optimization of the circuit configuration was performed by means of iterative SPICE analysis.
电路最佳参数的选择是借助于反复使用SPICE分析程序来完成的。
What how to improve the configuration of transformer in order to reduce loss, noise, partial discharge, leakage level and anti-short circuit capacity are introduced in this paper.
本文着重介绍如何改进变压器的结构以降低损耗、噪音、局放、渗漏水平及提高抗短路能力。
The basic circuit configuration and operation principle of dual switch forward converter based on SG3525 are introduced.
主要介绍了由SG3525构成的双管正激型开关稳压电源的基本电路结构和工作原理。
A signal detection system based on the correlation detection technique is designed. And the configuration of the detection circuit is illustrated in detail.
介绍了相关检测技术的原理和优点，设计了基于相关检测技术的信号检测系统，并且详细介绍了信号检测电路的实现方法。
Unlike the gravitational acceleration, the magnetic acceleration is a location-dependent variable and its magnitude and direction vary with the magnetic circuit configuration.
与重力加速度相比，磁加速度是一个依赖于空间位置的变量，其大小和方向随外磁场的磁路布置发生改变。
Unlike the gravitational acceleration, the magnetic acceleration is a location-dependent variable and its magnitude and direction vary with the magnetic circuit configuration.
与重力加速度相比，磁加速度是一个依赖于空间位置的变量，其大小和方向随外磁场的磁路布置发生改变。
应用推荐