The surface temperatures of 304 stainless steel wire and rod during 18 passes hot continuous rolling process was measured.
实测了304不锈钢棒线材18道次热连轧过程各道次的表面温度。
On line speed measurement of hot rolling steel is the key point for implementing tension control of continuous rolling process.
热轧钢材的速度在线检测是实现连轧张力控制的关键。
The temperature field, stress field and strain field of 304 stainless steel wire and rod during 18 passes hot continuous rolling process were calculated.
对304不锈钢棒线材18道次热连轧过程的温度场、应力场及应变场进行了数值模拟。
Temperature field finite element during flat hot continuous rolling process with compact double stand reversing rolling mill was researched, which is the only one in China.
实现了对国内唯一一架双机架紧凑式可逆炉卷轧机板材热连轧的温度场有限元研究。
A phenomenon called tension SATURATION was observed in experiments, which took place between universal pass and edger when edging H-beam in continuous rolling process with tension.
根据实验结果，作者发现了在H型件轧边端孔型中的张力饱和现象。
Marc, this paper deals with modeling of steady deformation process in multi-pass continuous rolling process with a 3D thermo-mechanical coupled FE model and static implicit algorithm.
采用三维热机耦合有限元模型和静力隐式算法，对多道次连轧稳态轧制过程进行模拟分析。
Having been sheared into several pieces as required, the reinforced bar produced by continuous rolling process is adopted with controlled-cooling technology. Its properties are described.
本文介绍了在连轧机组上采用的钢筋经分段剪切后控制冷却的工艺及有关性能。
It is of great importance to rhythm and coordination of the thin slab continuous casting and rolling process.
时间因素对薄板坯连铸-连轧流程的节律性、协同性而言，其意义尤为重要。
Automatic velocity control system for the continuous tandem cold mill let the rolling mill work continuously by using the looper to keep the uncoiling operation separating from the rolling process.
全连续冷连轧机的自动速度控制系统要求通过活套分离开卷运行过程和轧制运行过程以实现全连续轧制。
Based on the rolling force model and field data of Baoshan steel plant, the rolling force during continuous hot strip rolling process is simulated by using the DEFORM-2D software.
应用DEFORM - 2d软件对带钢热连轧过程的轧制力进行了有限元模拟，并与宝钢轧制力模型进行了比较。
Rolling the thick strip head is one of the most important techniques in continuous cold rolling process. It directly influences the out-gauge length of finished strips.
对于冷轧薄板而言，厚带头轧制是一项极为重要的技术，它直接影响了带钢成品的头尾超差长度。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
FGC control is one of the core technology of the continuous tandem cold rolling mill, and it is a complex process with the trait of multi-variable coupling and non-linear time-changing.
冷连轧机动态变规格技术是全连续冷连轧生产的核心技术之一，是一个具有多变量耦合和非线性时变特性的复杂过程。
The continuous casting rolling technology for nonferrous metals is a typical high efficiency, energy saving and short process method.
有色金属的连铸连轧、连续铸轧是典型的高效、节能、短流程加工技术。
Flatness automatic control system is an important part of process control system of sheet or strip continuous cold rolling mill.
板形平坦度自动控制系统是板带材冷连轧机过程控制系统的重要组成部分。
The ways to heighten the ribbed rebar quality were to improve the liquid steel cleanliness, continuous casting process, the heating temperature and rolling heat control during steel rolling process.
建议改善钢液清洁度、连铸工艺及轧钢加热温度和轧后余热处理工艺为提高钢材质量的途径。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
The process of thin slab continuous casting and direct rolling is different from the traditional one.
薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。
In this paper, mathematical model and FEM software for the simulation of thermal process during continuous casting and rolling of thin slab were developed.
本文针对连铸连轧的热过程，建立了各工艺的热过程的数学模型，并开发了相应的软件。
Based on research of the threading process for a continuous cold rolling mill, some factors that influence the threading process were found and corresponding measures were put forward.
通过对某轧钢厂冷连轧机的穿带工艺及轧制参数的研究，找出了影响顺利穿带的主要因素，提出了应对措施。
The equipment arrangement at hot charge area and furnace area effectively matches the short process continuous rolling production.
热送区与炉子区的设备布置，有力地配合了短流程连轧的生产。
We hereby give a brief introduction of the process using continuous casting& rolling method to produce aluminum cathode foil for electrolytic capacitor.
介绍连铸连轧法试制电解电容器用铝质负极箔的工艺研究过程。
Various problems in the application of Hazelett process to continuous casting and rolling for aluminum plate and strip are discussed in the article.
对哈兹列特工艺在铝板带连铸连轧应用中若干问题进行了探讨。
The thin slab continuous casting and rolling process is a reforming technology in the steel industry, and it should be mastered and promoted step by step in China.
薄板连铸连轧工艺是钢铁工业的重大变革技术，要切实掌握和逐步推广。
The thin slab continuous casting and rolling production line in Tang Steel is compared with the traditional process, the main quality control ways introduced.
对唐钢薄板坯连铸连轧生产线与传统热轧生产线轧制工艺特点进行了对比，介绍了该生产线在带钢轧制中所采取的主要质量控制手段。
The process and equipments of continuous print-coating line in Hansteel cold rolling plant was introduced and the main process data was given.
介绍了邯钢冷轧厂生产印花彩涂板的工艺设备；列出了印花板生产的主要工艺参数。
The temperature variation in continuous bar rolling process is studied by finite element method.
用有限元法分析了棒材连轧时轧件温度的变化规律。
The longitudinal surface crack on thin slab is a serious quality defect at thin slab continuous casting and rolling process.
薄板坯表面纵裂是连铸连轧生产线上的严重质量缺陷。
The longitudinal surface crack on thin slab is a serious quality defect at thin slab continuous casting and rolling process.
薄板坯表面纵裂是连铸连轧生产线上的严重质量缺陷。
应用推荐