The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
该运动控制卡能同时采集四轴的编码器脉冲信号，输出四路模拟电压控制伺服电机，同时能控制I/O信号的输入和输出。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Now commonly used servo motor is ac servo motor, the axial end in motor with photoelectric encoder, by examining the rotor Angle to frequency conversion control.
目前常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
Due to the large torque coefficient, small torque ripple and ease of control, permanent magnet synchronous motor (PMSM) system has been widely used in many accurate servo control systems.
永磁同步电动机系统具有力矩系数大、力矩波动小以及控制灵活等优点，在许多精密伺服控制系统中得到广泛应用。
Servo motor control the car running, if there is no device in place is bound to cause the car abnormal operation, printing problems.
伺服电机操控着小车运转，假如没有装置到位必定致使小车运转反常，打印呈现疑问。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
The designed grey feedback linearization control system was implemented in an indirect field-oriented induction servo motor to track speed commands.
设计的灰色反馈线性化控制系统可以实现间接磁场定向感应伺服电机来跟踪速度给定。
Design a servo motor control system.
设计一种伺服电机控制系统。
The exact rotor position is required while a permanent magnet brushless servo motor (PMBSM) is under commutation and control. Howere, position sensors have some fatal defects.
永磁无刷伺服电机的换相和控制都需要准确的转子位置信息，然而位置传感器有其难以克服的缺点。
The paper introduces the hardware and software design of an AC servo motor control card based on 80C196KC.
介绍自行研制的基于80C196KC单片机的交流伺服电机控制卡的硬件设计及其软件实现。
SVC(TND)SERIES single phase high precision full automatic ac voltage regulator composable of contact auto voltage regulator, servo motor automatic control circuit etc.
系列单相高精度全自动交流稳压器，由接触式自耦调压伺服式电动机、自动控制电路等组成。
This paper presented L2 robust control for permanent magnet linear motor servo system.
对永磁直线电机伺服系统提出非线性L2鲁棒控制。
The full digital technique was adopted to realize the servo control of the ac permanent-magnet synchronous (motor.) the technology was applied in the industrial sewing machine.
采用全数字技术实现对交流永磁同步电机的伺服控制，并将此项技术应用于工业缝纫机领域。
Adopting ac servo motor as a drive device, can and dc servo motor as a high precision, high performance and a half closed loop or closed loop control system.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
The dynamic hybrid, using a new type of mixer, servo motor control, speed adjustable, and the noise is very small.
选用动态混合时，采用新型混合器，伺服电机控制，转速可调，而且噪音很小。
The motor servo drive system was used to control antenna turning, adjust the antenna to point at satellite again and receive signal.
再用电机伺服驱动系统控制天线转动，调整其重新指向卫星接收信号。
Man-machine inter-facial can program logic control, pneumatic, servo motor drive, advanced sterilizing and asepsis keeping.
人机界面，可编程控制、气动、伺服电机驱动，先进的杀菌与无菌保障。
A motion controller interchangeable for servo motor and step motor constructed by motion control chip PCL240AS is introduced.
提出一种用运动控制芯片PCL240AS构造的伺服电动机和步进电动机通用的运动控制器。
Commonly used servo motor is ac servo motor, the motor shaft with in the photoelectric encoder, by detecting the rotor Angle to frequency conversion control.
常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
A new sensorless control method for AC permanent magnet linear servo motor using a sliding mode observer is proposed in this paper.
提出了一种采用滑模观测器的交流永磁直线伺服电机无传感器控制的新方法。
The paper mainly focus on the experimental research on pneumatic on-off valve motor position servo control system with PCM control method and self-adjusting PID algorithm.
文章主要研究的内容为利用PCM控制技术，采用自适应PID控制算法，对开关阀式气动马达位置伺服系统进行实验研究。
This paper describes performance indexes, structure features, design method and experimental investigation of electrohydraulic servo motor with super-low-speed, wide speed control and high precision.
本文介绍了超低速、宽高速、高精度电液伺服马达的性能指标、结构特点、设计方法和试验研究。
The whole project design of the AC servo motor control system based on TMS320F2812 is introduced.
介绍了基于TMS320F2812交流伺服电机控制系统的整体方案设计。
The control system of the manipulator consists of servo motor control unit, motion control unit and top management unit.
机械臂的系统控制硬件主要包括伺服电机系统﹑控制单元﹑运动控制单元﹑上层管理单元。
It is digital servo timing control system which is driven by PWM, direct current moment motor.
采用了脉冲调宽功放装置(PWM)，直流力矩马达直接驱动转台框架的数字伺服调速体制。
Servo motor control system Imported from Japan Panasonic, provide accurate displacement and speed control.
进口松下电机伺服控制系统，提供精确位移及速度控制。
In order to control the single joint's motion of the robot, a joint servo controller which integrates motion control and driving of the DC motor is designed.
针对机器人单关节的运动控制，设计了集直流电机运动控制和驱动于一体的关节伺服控制器。
The motion control of stepping motor in the servo system is investigated and a motion control module based on digital signal processor is designed.
介绍有关步进电机的伺服运动控制，设计了基于数字信号处理器的运动控制系统。
The motion control of stepping motor in the servo system is investigated and a motion control module based on digital signal processor is designed.
介绍有关步进电机的伺服运动控制，设计了基于数字信号处理器的运动控制系统。
应用推荐