Carefully set your plate on the rack, then cover with the lid.
把鱼盘小心的放在蒸架上，盖上锅盖。
For example one patient gave me a two-plate stove to cover my costs so I could do the work.
比如有一次，一个病人给了我一个双板煤气炉还支付运费，这样我也能继续工作了。
Caution: Do not loosen nuts on cover plate - This will result in loss of pre-charge.
警告：不要松开盖板上的螺母-这样做可能会导致预充气压力的损失。
Remove all nuts and bolts from cover plate and take off plate.
从盖板上拆卸所有螺母和螺栓，然后将盖板拿开。
Bladder is attached to tank at both ends. To remove bladder from tank remove all bolts from cover plate and take off plate.
内胆附在膨胀罐的两侧。要从膨胀罐上拆卸内胆，就要先从盖板上拆卸所有螺栓并将盖板拿开。
Cooling condition of the market, the developers choose to cover plate.
冷却条件的市场，开发商选择盖板。
If you open the cover plate of your cell phone you'll see a rectangular LCD on its backside.
把手机的盖板打开来，背面就是一整片长方形的液晶萤幕。
Motorcycle's crankcase cover plate is its engine's major component, which would vibrate to radiate noise under the force of the crankcase when the motorcycle'sengine operates.
摩托车的曲轴箱盖是发动机的主要构件，在摩托车发动机运转时，会受到曲轴作用的激振力而发生振动向外辐射噪声。
Otherwise, the bracket should be placed in the bottom of the main horizontal cover plate near the main beam two points to high.
否则应把支架垫在主梁的下水平盖板靠近主梁两点变高处。
Reattach cover plate to make an air and water tight seal.
重新固定盖板，并紧密密封防止空气和水通过。
Or texture of soft flexible rubber airtight floor drain in the cover plate on.
或用质地软有弹性不透气的橡胶板遮盖在地漏上。
The prestress of steel girder by high strength cover plate can raise stiffness and save steel, with simple configuration.
焊接高强钢盖板的预应力钢梁构造简单，刚度较大，节约钢材，是一种值得推广的结构型式。
Analyzed the forming process of the cover plate, introduced the layout design, and expound design and manufacture process of die structure and its main components.
分析了盖板零件的冲压成形工艺，介绍了零件排样设计方案，阐述了模具结构及其主要零件的设计和制造工艺。
The ultrasonic transducer vibrates longitudinally, its front cover plate links up with a half wavelength circular conical horn to increase the amplitude of the output end of the ultrasonic transducer.
该超声换能器采用纵向振动方式，其前盖板连接了一个半波长圆锥形变幅杆，以增大超声换能器输出端的振幅。
This article puts forward to lay a cover plate in the welding of the titanium sandwich pressure vessel and it also presents the structure and welding practice of the cover plate.
文章提出了在钛复合板压力容器的焊接中采用盖板敷设焊接，并具体介绍了盖板的结构及其焊接方法。
The forming technology for the cover plate, the structure of the die for the cover plate and the die manufacturing process were introduced.
文章提出了在钛复合板压力容器的焊接中采用盖板敷设焊接，并具体介绍了盖板的结构及其焊接方法。
The supporting part is fixedly connected with the joint in order to fold the convex-bubbled component and cover sheets for the cover plate behind the protection part.
支撑部与接头固定连接，以便折叠凸泡组件和保护部之后罩板覆盖薄片。
The injection mould for a duplicator cover plate is designed.
设计了复印机盖板的注塑模具。
Study on culvert energy-dissipating cover plate in dispersive delivery system is performed.
就分散输水系统中廊道支孔设置盖板这一共性问题，作了较为系统的研究。
The fence panel can be further equipped with a lower cover plate, and the steel plate is fixedly connected with the lower cover plate.
本实用新型还可设置下盖板，钢板与下盖板固定连接。
Agile and convenient wiring function; Modular trough assembles convenient, with edge to socket, don't cut any interchangeable cover the floor; Each cover plate outlet, with optional goes.
灵活方便的布线功能；模块化线槽拼装方便，地插座与边盖板任意互换，不可切割地板；每块盖板上没有出线口，可随意出线。
In addition, one-inch horizontal cover plate can prevent accidents.
此外，一英寸的板块横罩可有效防止发生意外。
The protection part comprises a joint. By means of at least a broken line, the protection part is connected with a cover plate.
保护部包括一接头，它借助于至少一折线与一罩板相连接。
In order to overcome the difficulty of heavy cover plate installation with two times of welding, a welding procedure finished cover plate welding at one time is put forward.
针对采用“两次拼焊工艺”拼焊大型盖板存在的问题，提出了“一次拼焊”工艺。
Original create hit-proof decoration cover plate, make it perfect, luxury and elegant.
独创扇防撞装饰盖板，使外观趋于完美，既豪华又典雅。
Cable inlet for bottom elevated cover plate: the cover plate can be dismounted to drill holes and the seal rings are provided.
底部凸台盖板进线，盖板可预先拆下开孔，并配有密封圈。
The handle of cover plate is adopted as retractable handle.
盖板把手改为可折叠式。
The complex pump body in the pump is fabricated by that a pump body, a whorl casing, a liquid inlet pipe, and a cover plate are assembled.
泵中复杂泵体由泵体、涡壳、进液管及盖板等部分组装而成。
An upper cover plate can also be arranged between the panel body and the steel plate, and the panel body, the upper cover plate and the steel plate are fixedly connected.
本实用新型板体、钢板之间还可设置上盖板，板体、上盖板、钢板固定连接。
An upper cover plate can also be arranged between the panel body and the steel plate, and the panel body, the upper cover plate and the steel plate are fixedly connected.
本实用新型板体、钢板之间还可设置上盖板，板体、上盖板、钢板固定连接。
应用推荐