Affix using one of the crank arm fixing bolts.
词缀使用其中的一个曲柄臂固定螺栓。
Each piston has a crank arm attached to a crankshaft.
每个活塞有曲柄连接曲轴臂。
They sit pretty close to the crank arm and we've been quite pleased with them so far.
他们坐在非常接近曲柄，我们已经对他们相当满意为止。
To power the machine, several people would turn a crank arm connected to the vacuum pump.
要操作此机器，需要几个人转动与真空泵相连的曲柄装置。
Dial gauge with universal dial gauge bracket must be screwed to the cylinder block and placed against the crank arm.
百分表及通用百分表托架必须通过螺钉固定在气缸体上，位置与曲轴臂相对。
Turn the wiper module over and remove the nut that secures the wiper motor crank arm to the wiper motor output shaft.
转动雨刷模组盖，并拆下将雨刷马达曲柄臂固定于雨刷马达输出轴上的螺帽。
The utility model is composed of a land wheel, a driving pin, a driving crank arm, a driving inserted link, a release spring, and a driving ratchet.
它由地轮、传动销、传动拐臂、传动插杆、回位弹簧和传动棘轮组成。
Abstract: Fracture failure of junction crank arm of external cylinder retraction-extension actuator of landing gear of Y-7 aircraft is analyzed in this paper.
对运七飞机起落架外筒收放作动筒连接摇臂的断裂损伤失效进行了分析。
Aim to the serious subfilling of the crank arm, the construction of"constrained wing"was presented to form the favorable die filling instead of increasing the forging size.
提出“约束翼”新型结构，对曲柄臂严重缺料的情况下，在不增加锻件的下料尺寸，成形质量良好的曲轴锻件；
The crankshafts shown in Fig 1-4 is actually made up of various parts such as main bearing journals, rod journal, crank arm, bearing, counter balanced weight and flywheel end.
在图1-4中，曲轴实际上由以下不同的部分组成，它们分别是：主轴承轴颈、连杆轴颈、曲轴臂、轴承、平衡配量（？）以及飞轮端。
Based on the analysis of plastic flow law in crankshaft forming, the cause of typical forming defects, i. e. the folding existing in the crankshaft pin and crank arm was found out.
通过模拟分析曲轴成形的塑性流动规律，找出了大型船用曲轴曲拐成形过程中的典型缺陷连杆颈和曲柄臂外侧折叠的成因。
Horizontal double sided NC combined drilling machine is specially designed for the machining of main shaft journal hole and crank arm journal straight oil hole of crankshaft with six cylinders.
针对加工六缸曲轴主轴颈孔、连杆颈直油孔的需要而设计的卧式双面多工位数控钻削组机。
To raise the polishing efficiency of Cubic boron nitride (CBN) superhard material, crank rocker arm mechanism has been developed by using Computer Simulation Technology.
为了提高立方氮化硼超硬材料的抛光效率，采用计算机仿真技术开发了曲柄摇杆抛光机构。
The design of die structure has much influence on shape dimension and precision of the formed crank-arm with a non elliptical section.
对于非椭圆截面曲臂的大型曲轴，其模具结构设计对曲轴成形后的形状尺寸精度影响极大。
Motion state of the plate turnover machine of gear drive type, double-arm crank rocker type and hydraulic type has been analyzed deeply.
对齿轮传动式、双臂曲柄摇杆式、液压式翻板机的运动状态进行了较深入的分析。
The invention discloses a mechanism arm, in particular to a crank block type mechanism arm of a robot for transmitting workpieces among vacuum Chambers of vacuum filming equipment.
本发明公开了一种机械臂，特别是一种在真空镀膜设备各真空室之间完成传递工件的机器人的曲柄滑块式机械臂。
If the pumping unit is unbalanced, the counterweight and the crank balance arm can be adjusted according to the formulas presented in this article.
当抽油机不平衡时，可以按文中的公式调整平衡块和曲柄平衡半径。
With an adjustable crank pin to control the length of stroke. As the bull gear rotates, the rocker arm is.
惠氏机构的电机转动重载齿轮，驱动一个带有可调整销钉的曲柄以便控制进、回程的长度。
Objective:To investigate the reliability of an one arm crank ergometry protocol used for exercise test for patients with hemiplegia.
目的：研究单臂功率车运动方案用于偏瘫患者心电运动试验的可行性。
A knuckle-to-knuckle Drag link provides continuity between the wheels, while the Tie Rod provides linkage to a Bell Crank (Pitman Arm).
一个指节到指节拉杆之间的连续性提供了车轮，而拉杆提供给贝尔曲柄连杆(必文臂)。
The four-bar linkage included in the mechanical steering system of industrial vehicles is composed of the crank of steering gear, longitudinal connecting rod, the arm on kin pin and frame.
在轮式工业车辆的机械式转向操纵系统中，联系转向器与梯形机构的纵拉杆机构，在构造上属于含有两个球铰和两个圆柱铰的RSSR机构。
The four-bar linkage included in the mechanical steering system of industrial vehicles is composed of the crank of steering gear, longitudinal connecting rod, the arm on kin pin and frame.
在轮式工业车辆的机械式转向操纵系统中，联系转向器与梯形机构的纵拉杆机构，在构造上属于含有两个球铰和两个圆柱铰的RSSR机构。
应用推荐