Crank mechanism design provides strong pressure with little loss;
曲肘机构设计，压缩空气消耗少，压力强劲。
The transmission mechanism is composed of a guiding ring which is welded on a machine frame, and four rods crank mechanism.
该传动机构由焊接在机架上的导向环和四杆曲柄机构组成。
This article provides an optimizing series method to study the approximate function synthesis of the slider-crank mechanism.
本文提出了用优化连续法研究曲柄滑块机构的近似函数综合。
The kinematics characteristic of the slide of a press is changed obviously by the ellipse gears and crank mechanism in series.
具有变速传动性能的椭圆齿轮机构串联曲柄滑块机构能够明显改变压力机滑块的运动特性。
The crank mechanism is arranged on the lower part of the insulation rod, and comprises a crank type wrench and a wrench bracket.
导杆伸入弯头后通过软索与设置在绝缘杆内的拉杆固定相连；
The actuating principle of an outward translational swinging door for bus is analogous to the kinematics of a quadric crank mechanism.
外摆平移式车门的运动原理，相当于平面四连杆机构的运动原理。
In this paper the mathematical model of optimal design of the double-gear crank mechanism for generating a function is first established.
本文首次建立了实现函数的双齿轮曲柄机构优化设计的数学模型。
The mechanism driven by a bidirectional pneumatic cylinder for climb robot is composed of two groups of slider-crank mechanism in series.
本机构由两组曲柄滑块机构串接而成，双作用气缸驱动，实现机械手的主爬升运动。
The device for driving flat in the flat grinding machine is composed essentially of a slider-crank mechanism and two rotating guide mechanisms.
磨盖板机中的盖板传动装置由一个曲柄滑块机构和两个转动导杆机构等组合而成。
A typical four-bar mechanism and a typical slide-crank mechanism are used for test of the distributed simulation environment and applications developed in this thesis.
基于所完成的平面机械系统运动学分布式仿真软件，本文实现了平面四连杆机构、曲柄滑块机构的分布式仿真算例。
The paper respectively studies the principles and features for profiling attachment and slider crank mechanism to be used as clamping apparatus to fabricate oval hand hole cover.
分别对凸轮靠模和曲柄滑块机构作为工装加工椭圆手孔盖的原理及特点进行了探讨。
Then the finite element method is introduced for the elastic slider-crank mechanism, i. e. how to make the dynamics model of an elastic beam element by using the finite element method.
同时针对弹性机构而言，介绍了有限单元法。主要说明如何对弹性梁单元进行有限元建模。
Based on the principle of the spatial inversion, this paper proposes a new method of determining the stroke of the slide block of the spatial slider-crank mechanism by way of descriptive geometry.
本文根据空间反演变换的原理，运用画法几何的方法，对空间曲柄滑块机构滑块行程的确定，提出了一种新的图解法。
He was idly turning a crank on a strange mechanism strapped to his chest.
他漫不经心地转着绑在他胸前的一个古怪装置上面的曲柄。
Reciprocating compressors is using the piston, the crank, link mechanism or the piston, the crank, sliding tube institutions, rotary compressor rotor is the use of crankshaft institutions.
往复式压缩机使用的是活塞、曲柄、连杆机构或活塞、曲柄、滑管机构，旋转式压缩机使用的是转轴曲轴机构。
According to its equivalent mechanism-crank rocker mechanism, driving performance and minimum driving Angle position of movable tooth is analyzed.
利用摆动活齿传动等效机构，分析其传动性能和最小传动角的位置。
The characteristic of node offsetting of crank slider mechanism, especially the velocity change after node offsetting and their application in different machines have been described.
分析了结点偏置曲柄滑块机构的运动特征，特别分析了偏置后的速度变化以及由此可以应用的机床。
This paper discusses the method for designing of crank rocker mechanism under given minimum transmission Angle conditions.
本文讨论在己知最小传动角条件下设计曲柄摇杆机构的方法。
To raise the polishing efficiency of Cubic boron nitride (CBN) superhard material, crank rocker arm mechanism has been developed by using Computer Simulation Technology.
为了提高立方氮化硼超硬材料的抛光效率，采用计算机仿真技术开发了曲柄摇杆抛光机构。
Though experiment the idea velocity of cartooning balanced emulation has been educed, instantaneous movement rule of capping in capping device, crank rocker mechanism has been emulated also.
通过试验，得到了装盒平稳模拟的理想速度，找到了盖盖装置中盖盖瞬时的运动规律，并对其曲柄摇杆机构进行了模拟。
This paper introduces a simple graphic method for designing the planar crank slide block mechanism with urgent returning specific property and gives theoretical proof.
介绍了设计有急回特性的平面曲柄滑块机构的简易图解法，并给出了理论证明。
Analyzing the motion inversion of the limit of the crank rocker mechanism, drawing the relative supplementary circle, and designing the mechanism up to requirement.
对曲柄摇杆机构极限位置进行运动倒置分析，作出相应辅助圆，从而设计出满足条件要求的机构。
A discussion has been made on the problems of balance for shocking force and moment of the commonly used crank slider mechanism in machinery.
对机械中常用的曲柄滑块机构的振动力和振动力矩的平衡问题进行了探讨。
The design optimization of jig construction, jig body, locating mechanism of crank case cores, jacket cores assembling vehicle and jig supporter was discussed.
对夹具结构、夹具本体、轴箱芯定位机构、水套砂芯组芯小车及夹具支架的设计优化进行了讨论。
Analog mechanism model include four bar linkage, crank and sliders mechanism, speed returning mechanism, perpendicular mechanism.
模拟的机构模型有四杆机构、曲柄滑块机构、速返机构、垂线机构等。
The causes of vibration on high speed press consist mainly in the inertial force of crank slide mechanism and the working force of the press.
高速压机的振动原因，主要是曲柄滑块机构的惯性力和压制工作时的加工力。
The working principle was analyzed for the middle-bulged varying ellipse shape of the two-freedom mechanism with the crank sliding-block mechanism and the cam mechanism.
分析了以曲柄滑块机构和凸轮机构为主动的二自由度机构成型活塞中凸变椭圆的工作原理。
This paper focus on establishing kinetic model and simulating kinematics by ADAMS, and analyzes the kinetic characteristic of the crank block mechanism in high-speed press through simulation.
本文建立了高速压力机曲柄滑块机构的运动学模型，并仿真分析了高速压力机中曲柄滑块机构的运动学特性。
This paper introduced a kind of geometric synthesis method for a crank rocker mechanism guided by a rigid body.
本文介绍了一种刚体导引的曲柄摇杆机构几何综合法。
The application of this system supports the development of crank-link mechanism promptly and effectively.
本系统的应用，快捷有效地支持了曲柄连杆机构的设计开发。
应用推荐