Meanwhile, the product, which is good for environmental protection, is an environmentally-friendly magnesium alloy cutting solution with excellent performances.
同时产品绿色环保，为一种性能优异环境友好型镁合金切削液。
This is a sensible solution to an everyday gripe for mobile phone users, which will reduce frustration and confusion for consumers as well as cutting down on waste products.
这是一个针对移动电话用户普遍烦恼的合理解决方案，这将减少消费者的挫折感和困惑，与此同时还将减少垃圾。
To be fair, the solution environmentalists prefer - cutting ties between the lakes and the Mississippi - would mean reconfiguring some 70 miles of canals and rivers.
公平地说，环保组织喜欢的方案-割断大湖区和密西西比之间的联系-意味着重新配置约70英里的河流和运河。
It is suitable for the grinding of steel ingot, removing burrs of casting, precision grinding of stones, cutting and polishing. But it should be kept away from alkaline solution.
适用于磨钢锭、铸件打毛刺、石材表面精加工、切割、抛光等。但该类磨具不抗碱性溶液。
Based on the minimum energy solution of shear Angle, the cutting forces in orthogonal machining are predicted theoretically in this paper.
基于剪切角的最小能量解，对正交切削时的切削力进行了理论预报。
Working out the control methods of conveying, moving up and down of weighing equipment and billet cutting, the control solution of online weighing of billets is proposed.
研究了辊道、秤体升降以及方坯剪切的控制方法，给出了方坯在线称重的控制方案。
The cutting performances of saw blade by solution and non-solution heat treating were determined.
对比测定了经固溶处理和未经固溶处理锯条的锯切性能。
This article analyzes the reason for broken wire in electric spark cutting machine and puts forward some solution.
分析了电火花线切割机断丝原因，并相应地提出了解决方法。
This paper proposes an optimization method on the plate shaving cutter, its optimal solution is the premises matching the smallest toothing Angle on the condition of the last cutting grinding.
本文提出了一种盘形剃齿刀的优化设计方法，其最优解是最后一次刃磨时的最小啮合角对应的条件；刀具寿命期间，保证进入双齿啮合剃齿。
This paper analyses problems of the traditional printing and fluting machine cutting system, and puts forward a new solution based on motion controller. Both the hardware and software are designed.
本文在分析传统的印刷开槽机切割系统存在的问题基础上，针对其存在的问题提出了一种基于运动控制的精确切割系统的设计方案，并给出了相应的软硬件实现方法。
The article deals with the cause of this phenomenon and put forwards the solution: how to establish and cancel the track of the cutter compensation in order to avoid the phenomenon of over-cutting.
文中针对过切现象进行了分析，提出了解决方案，并对建立和撤销刀具补偿轨迹提出了要求。
This paper discusses the establishment and solution on the model of cutting stock problem and applies this model to production and practice.
论述了下料问题模型的建立及其求解，并把该模型应用于生产实践中。
Preparation of pod solution: cutting stem and lid of108different concentrated folacin acid into pieces and mixed from9cans of each group with12groups in total.
对12组每组9瓶共108瓶经不同浓度叶酸处理银针菇的菌盖、菌柄剪碎混匀后，从每份样品中称取0。
This paper discussed the adaptation of VME machine and the seleted method, sachas shearing and cutting mode of the solution salver on its mixer.
讨论了VME型真空制膏机的使用适应性及该设备搅拌器溶解盘剪切方式的选择方法。
The dynamic process of metal cutting is simulated by using FEM software ANSYS. At the same time, the deformation graphics of surface hardening and its numerical solution are obtained.
利用有限元软件A NSYS模拟出了金属切削的动态过程，同时获得已加工表面的加工硬化变形图及其数值解。
The paper tells us the working theory of the automatic-cutting line in an electric machinery factory, analyzes the problems on the line and puts forward the solution.
本文叙述了某电机厂自动剪切线的工作原理，分析了原生产线上存在的问题，提出了解决问题的方案。
A new analysis method is introduced on inclusions in steel in this paper, by the method of electrolysis of nonaqueous solution associated with RTO metal embeds cutting film micron-nano token method.
研究了一种采用非水溶液电解法与RTO金属包埋切片微米-纳米表征法联合分析钢中非金属夹杂物的新方法，该方法全过程对夹杂物不产生任何损伤破坏作用。
And then he proposes a set of solution for cutting map image and storage of mass raster image.
最后提出了一种基于四叉树索引的海量图片的存储与检索方法。
Based on the theory of annular gas-liquid two-phase flow, a model to calculate gas-cutting fluid flow in wellbore is established, and meanwhile a numerical solution to the model is given.
以环空气液两相流动为理论基础，建立了井筒气侵流动计算模型，同时给出了计算模型的数值求解方法。
Based on the theory of annular gas-liquid two-phase flow, a model to calculate gas-cutting fluid flow in wellbore is established, and meanwhile a numerical solution to the model is given.
以环空气液两相流动为理论基础，建立了井筒气侵流动计算模型，同时给出了计算模型的数值求解方法。
应用推荐