The DC motor speed control system for providing an effective way.
对于直流电机速度控制系统的实现提供了一种有效的途径。
It can be used to provide blocking protection to a specific DC motor speed control system.
用此方法对一个直流电机数字控制调速系统进行堵转保护。
In this paper, a DC motor speed control system based on fuzzy controller theory is introduced.
本文主要介绍了以模糊控制理论为基础的直流电机调速模糊控制系统。
This is the brushless DC motor speed control procedures, written in assembly language. apply to TMS320LF2407A DSP.
这是无刷直流电动机调速控制程序，汇编语言编写，适用于TMS320 LF 2407a的DSP。
SCM control of permanent magnet brushless DC motor speed control system applicable to electric bicycles, and other low-power work.
摘要单片机控制的永磁无刷直流电动机调速系统适用于电动自行车等小功率的工作情况。
A kind of PID controller with fuzzy algorithm setting on-line PID parameters automatically was designed and applied in brushless DC motor speed control system.
通过设计一种模糊pid控制器，应用模糊算法在线自动整定PID参数的方法，将其应用于无刷直流电动机调速控制系统。
The paper presents two kinds of algorithms for two kinds of controller structure and the paper gives the result of experiment on DC motor speed control system.
文中分两种情况给出了两种控制器结构及相应的算法，最后示出了在调速系统上的实验结果。
The platform verified that the proposed variable load DC Motor Speed Control System with nonlinear state space model and parameter identification method is effectiveness.
利用该平台验证了提出的变负载直流电机双闭环调速系统的非线性状态空间模型及其参数辨识方法的有效性。
The control system for the brushless DC motor based-on 80c196mc consists of 80c196mc, IPM, speed displaying and speed setting module.
基于80c 196MC芯片的无刷直流电机控制系统，包括80c 196 MC、IPM、速度显示及速度设定模块。
The software phase-locked loop (SPLL) technology in the steady speed control of permanent magnet brushless DC motor (BLDCM) in gyro was discussed.
研究了软件锁相环技术在陀螺用无位置传感器无刷直流电机稳速控制系统中的应用。
The control of DC motor on robot based on VB6.0 can make robot moving with post or constant speed.
利用VB6.0语言编程实现对机器人上直流伺服电机的控制，从而实现机器人的加速和恒速运行。
The DC control motor control with cut-off current and speed stabilization can be applied to torsion control and measurement.
直流控制电机的限流与稳速控制方式适用于转矩控制与扭矩测量。
The fuzzy logic controller designed in this study determines the required angular used in the DC chopper control based on motor speed error and its change.
设计的模糊控制器以电机的转速偏差及转速偏差率为输入，输出量用于控制斩波调速时的导通角。
This article presents a design of permanent magnetic brushless DC motor control system and mainly involves the hardware circuit design of speed closed loop and power module drive.
介绍了一种永磁无刷直流电机控制系统的设计方案，主要涉及速度闭环和功率模块驱动的硬件电路设计；并通过实验证明该设计可直接用于小型无刷直流电机的控制。
This paper introduces the fuzzy control of DC motor speed and the relevant principles, and proposed fuzzy control of motor speed based on the relevant methods.
介绍了直流电机调速以及模糊控制的相关原理，并提出了基于模糊控制的电机调速的有关方法。
A good controller is crucial to speed control of brushless DC motor, so it is important for brushless DC motor to find out a good control method.
控制器对无刷直流电动机的转速控制至关重要，因此研究无刷直流电机的控制策略十分重要。
This paper presents a new compensation method for stator voltage amplitude and DC offset, which can improve the performance of the speed sensor-less vector control of induction motor.
为了提高异步电机无速度传感器矢量控制的低速性能，提出了一种定子电压幅值和直流偏置补偿办法。
This paper mainly studied using STC series microcontroller control PWM signal output so as to realize the speed control of a dc motor control method.
本文主要研究了利用STC系列单片机控制PWM信号输出从而实现对直流电机转速进行控制的方法。
Using the estimated speed as feedback signal, we have accomplished the sensorless control of a DC motor.
同时利用观测器之估测转速当成回授讯号，达到无测速计直流马达的速度控制。
The design of the speed control system of brushless DC motor based on SPMC65P2404A is implemented, which used in the electric-bicycle.
以SPMC65 P 2404 A单片机为核心，设计了一种用于电动自行车的无刷直流电动机调速控制系统。
The speed control problem of a series dc motor is considered.
讨论直流串激电机的速度控制问题。
The error of inductosyn Angle measurement system will cause ripple of speed in DC motor control system. This error is equal to adding a disturbance to the input.
由于感应同步器测角系统的误差的存在，相当于在系统的输入端加入了一个干扰，从而在电机控制系统中引起电机速率的波动。
The controller of the DC motor speed adjusting system is developed, which is based on ITAE optimum control theory combined with PI control.
提出了一种用于直流电机调速系统的控制器设计方法，该方法主要基于ITAE最优控制理论，并结合PI控制。
This model permits the design of the current and speed control loops to adopt the same principles as the dynamic design of armature DC motor drives.
这种模型可以采用和直流电动机动态设计同样的原理进行电流环及速度环的设计。
The digital PWM speed controller based on the DC motor PWM speed regulating theory and using a 16 bit microcomputer 80C196KB/KC as the central control chip, was presented.
介绍了以十六位单片机80C196KB/KC作为中心控制芯片，结合直流电机PWM调速原理制成的数字直流PWM调速控制器。
Thus accurately control dc motor speed, the experimental result indicates that the method can accurately control high, stable, real-time controlling motor speed.
试验表明，该方法控制精确高，能稳定、可靠、实时地控制电机转速。
In order to improve the control motor speed of steady state and dynamic characteristics because of brushless dc motor has highly nonlinear characteristics.
无刷直流电机具有高度的非线性特性，为了提高电机转速控制的稳态和动态特性。
A power amplification of H-bridge bipolar PWM control is designed for controlling DC micro-motor of positive rotation, reverse rotation and speed regulation.
基于H型双极模式P WM控制原理，设计了一种直流微电机正反转调速功率放大电路。
This paper makes use of ordinary power supply chip TL494, which having characteristic of PWM output, DC motor speed-varying control circuit has been designed.
本文利用最常见的用于电源的PWM电压调节芯片TL494，设计成直流电机调速控制电路。
This paper makes use of ordinary power supply chip TL494, which having characteristic of PWM output, DC motor speed-varying control circuit has been designed.
本文利用最常见的用于电源的PWM电压调节芯片TL494，设计成直流电机调速控制电路。
应用推荐