The obtained displacements can be used for further deformation analysis of each tectonic block.
得到的这种位移可作为各块体变形分析的基础。
The stress and deformation analysis for surrounding rock of tunnels is an important task in tunnels design.
隧道围岩应力和变形分析是隧道设计的重要内容。
The tool deformation analysis is used to select the rational cutting parameter and change the processing scheme for ensuring clamp block accuracy, to achieve the use requirement.
分别通过刀具变形分析来选择合理的切削用量和改变加工方案等方面考虑来保证夹块精度，以达到使用要求。
An approach for modeling rock crack propagation using discontinuous deformation analysis (DDA) method is presented.
提出一种用非连续变形分析方法模拟岩石裂纹扩展的方法。
It found that combination of deformation analysis and stability evaluation for slopes is still the focus in the study field of slopes stability.
如何有效地将边坡的变形分析和动力稳定评价有机结合起来一直是边坡动力稳定研究领域的热点问题。
The deformation analysis of the main parts of the disc-separator bowl is performed for the overspeeding process using elastoplasticity FEM and analytical method.
本文采用弹塑性有限元法和解析法，对分离机转鼓的主要零件进行了超速自增强的变形分析。
Combining with the relative movement parameters, a deformation analysis method of successive approximations is presented.
结合相对运动参数，提出了一种逐渐趋近的变形分析方法。
The direct solution and the indirect solution for deformation analysis were discussed in this paper.
介绍了形变分析中经常采用的两种方法：直接法和间接法。
Mechanical calculation and structural deformation analysis were performed in the system design.
通过力学计算及结构变形分析，为系统设计提供参考。
It is very important for deformation analysis in time and frequency domains.
它对变形的时域分析和频域分析有着重要意义。
Finite elastic deformation analysis of a four column supported prestressed latticed shallow shell roof shows that the bolts have influence upon the computed results more significantly.
一个四柱支承大跨度预应力浅网壳结构的有限弹性变形分析表明，锚栓对计算结果影响较大。
In this paper, an engineering assessment method of elastic-plastic fracture based on finite deformation analysis of complex structures. or a modified COD -design equation, presented forward is put.
文章在有限变形分析基础上建立了对复杂结构进行弹塑性断裂评定的工程方法，用以修正COD设计曲线。
For the crustal vertical deformation analysis, higher-order kernel function is not sortable.
就地壳垂直形变分析的实际情况而言，不宜采用高阶的核函数。
Varied curvature makes deformation analysis of curved girder more complex, and seeking simple and reliable mechanics model is of advantage to the study on variable-curvature curved girder.
变曲率导致曲线梁变形分析更加复杂，寻求简单、可靠的力学模型有利于变曲率曲梁的研究。
It is important to plastic deformation analysis for we to understand correctly the geometrical form and properties of yield function of sintered powder materials.
正确认识粉末烧结材料屈服函数形状和性质，对于其塑性变形分析有重要意义。
For the construction process of twice prestressed continuous beam, the stress analysis and deformation analysis method during construction stage is provided in this paper.
根据二次预应力连续梁的施工过程，提出了施工阶段的应力和变形分析方法。
This paper introduces not only the development of monitoring control network and determination of observation points, but also data processing and deformation analysis.
主要介绍施工变形控制网和观测点的建立与观测方法以及数据处理与分析。
Using the combined deformation analysis method, the author mache an analysis of tapered bit forced in operating.
本文采用组合变形的分析方法，对锥体连接钎头工作时进行受力分析；
Here these measurements often used fall into laser macroscopic deformation analysis and X-ray analysis.
将经常使用的方法归纳为激光宏观变形分析法和X射线分析法。
This paper applies the theory of limited deformation analysis to the non-linear problem of the geometrician and creeping material for the frozen-wall.
本文用有限变形理论对人工冻结壁施工的几何非线性和冻土蠕变材料非线性问题进行了非线性数值分析。
Satisfactory results can be gained when using the software to make landslides deformation analysis.
用该软件作滑坡变形分析，能取得满意成果。
The results of deformation analysis show that the north of Xiansuihe fault zone is in creep and that the south of the fault zone is in locking with strain accumulation.
形变分析结果表明，鲜水河断裂带北段处于蠕动状态，南段则处于应变积累的闭锁状态。
Based on the discontinuous deformation analysis (DDA), the stability of the high rock slope behind the power house of Jiudianxia hydroelectric station was studied.
应用非连续变形分析(DDA)对九甸峡水电站厂房高岩体高边坡进行了稳定性分析研究，建立了DDA块体系统分析模型。
Considering the limitation of single point deformation analysis, the contour method for integral deformation analysis is put forward.
针对单点变形分析的局限性提出了整体变形分析的等值线法。
Based on deformation analysis of Daheba fossil landslide, the reasons for sliding were studied in this paper.
在分析大河坝古滑体变形特征的基础上，对古滑体的复活成因进行了深入分析研究。
Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
The two-dimension plane model and the simplification of dynamic loading are applied to create the finite element model for asphalt pavement permanent deformation analysis.
采用二维平面模型，“以静代动”的荷载简化方法，建立沥青路面永久变形有限元分析模型。
A 16 node shell element with relative degrees of freedom was developed for large deformation analysis of plate and shell structures.
为了简便有效地解决板壳结构的大变形问题，针对16节点相对自由度壳单元进行研究。
Forging mechanism is very complicated, and numerical simulation is the most effective method for plastic deformation analysis.
锻造成形机理非常复杂，数值模拟是目前塑性成形分析最有效的方法。
Forging mechanism is very complicated, and numerical simulation is the most effective method for plastic deformation analysis.
锻造成形机理非常复杂，数值模拟是目前塑性成形分析最有效的方法。
应用推荐