This paper presents the design method of engineering design calculation model and AUTOCAD interface program and expounds I...
本文介绍了工程设计计算模型与AUTOCAD接口程序的设计方法，并结合实例阐述了其应用和意义。
The optimized design scheme could be found out to content requirements of design by a method combining calculation of finite element model and optimized design.
采用整体有限元模型计算与设计优化相结合的方法，可以在满足各项设计要求的条件下找到最优预应力设计方案。
So we must find a logical calculation method and design model for shallow square boxes in order to guarantee the forming quality and improve the economic performance.
因此，我们必须寻找一种合理的低盒形件毛坯外形计算和设计方法，来保证板料的成形质量，从而提高经济效益。
In the design of MEMS, the resolution model of every essential device, the accurate numeric analysis and calculation are required to achieve more precise and rational analyzed results.
在MEMS器件设计中，综合各基本器件的精确分析结果，才能保证设计的合理性与准确性，这就需要建立器件的解析模型，并能够对其进行精确的数值分析与计算。
The article sets forth the design characters, functions, data structure, model and engineering calculation of this system.
文章阐述了该系统设计的特点、功能、数据结构和模型、工程计算等问题。
The paper focuses on the design of the system structure and the calculation model for multi-train movement.
重点介绍了模拟系统的总体结构设计和多列车追踪运行的计算模型。
This paper introduces the present method of numerical analysis and design model for structure calculation in underground construction. Then, these calculative methods were evaluated.
本文介绍了目前地下工程结构设计采用的计算模型及相关的数值分析方法，并对各计算方法进行了评价。
Using the theory of design on plate deformation, with attainment of high yield, we can find mathematics model and method on slab calculation.
利用中板变形规程的设计原理，以提高成材率为目标，得到了坯料计算的数学模型及基本方法。
Through the calculation of several different design and operating conditions the basic functions of the model are displayed and verified with some meaningful conclusions being obtained.
通过若干不同设计和运行工况的计算，显示和验证了模型的基本功能，并得到了一些有意义的结论。
A design model of a finite length rectangular pressure vessel was established based on the plate heap theory, the calculation formula of the side plate thickness was derived.
在平板叠加理论的基础上，建立了一个有限长对称矩形压力容器的设计模型，并推导出其侧板厚度的计算公式。
It analyzes the design elements of the pool from several aspects including the pool structure, load, computing model, load combination and internal force calculation and structural requirements.
从水池的结构形式、水池的荷载、水池的计算模型、荷载组合及内力计算、水池构造要求几方面分析了水池设计的要点。
The IBIS model is used to help get exact information in the integrity constraint design of system board level or multiple board level signals for analysis and calculation.
IBIS模型可以帮助设计者在系统板级或多板信号完整性约束的设计中获取准确的信息，以进行分析和计算。
This model USES new coupling correction alternation direction implicit iterative solution, parallel calculation program design, alternative direction grid delineation and parallel data transference.
该模型采用新的耦合修正交替方向隐式迭代求解、并行计算程序设计、交替方向网格划分、数据并行信息传递。
Then driving posture calculation model was built, it can calculate driving posture when the design factors and anthropometric parameters are input.
该模型可以根据驾驶舱设计元素和驾驶员人体参数计算驾驶姿势。
Duncan Zhang model, which has several parameters with definite physical meaning, is widely applied in theoretical calculation, design, and actual projects.
邓肯-张模型由于试验参数少，其物理意义明确，在很多理论计算、设计和实际工程中仍然广泛运用。
The paper provides a detailed discussion on the theory of this new propulsion system, on the optimum design and calculation program, its construction, per formance. model testing and practical use.
本文就这先进推进系统的原理、优化设计计算程序以及系统的结构、性能、模型试验和实用化等作了阐述。
The effect of major parameters of die structure on metal flow velocity is integrated and the mathematical model of design and calculation of aluminum profile extrusion die land length is derived.
并综合主要模具结构参数对金属流动速度的影响，建立了铝型材挤压模模孔工作带设计计算的数学模型。
At last, the applicability of the model to an actual product dynamic management is confirmed with the example of a boiler thermodynamic calculation design process.
最后以锅炉热力计算设计过程为例，验证模型对实际产品动态过程的可管理性。
As we know, classic optimization techniques are not only troublesome in calculation, but also low efficient for the highly non-linear interval parameter optimal design model (IPODM).
对于高度非线性的城市污水处理厂区间数优化设计模型（IPODM） ，若采用传统的方法求解，不仅计算繁琐，且难以有效地寻找全局最优解。
Firstly, a research of the calculation of noise prediction model based on GIS, noise impact index, as well as the database design are conducted; Secondly, VB6.
首先对基于GIS的噪声预测模型计算、噪声冲击指数计算，以及数据库设计等关键技术问题进行了研究，然后选择了VB6。
During the reliability analysis of surrounding rock and detail design, using appropriate model and parameters is very important to the result of calculation for it's special material.
由于岩体介质材料的特殊性，在地下工程围岩稳定性分析与施工设计的过程中，本构模型及其计算参数的选取对计算结果的可靠性有着重要的影响。
The other is design calculation module used to conventional design or optimum design for chemical unit operation . The suitable algorithm was presented according difference model and design task.
二是设计计算模块，利用该模块可以对不同化工单元操作设计（常规设计或优化设计），选择适宜的算法进行设计计算。
The study indicates that the calculation model and simulation method are reasonable and feasible, so can be applied to the optimizing design for linear shaped charge cutter.
计算结果与线型聚能射流的物理现象和规律相吻合，说明该计算模型和模拟方法合理、可行，可用于线型聚能切割器的优化设计。
Introduction of the design concept of Guishui River Bridge. Setting up the calculation model of trestle design and presenting the calculation methods of the model.
介绍了妫水河栈桥的设计思想，给出了栈桥设计的计算模型及其模型的计算方法。
Through the design of the equal delta and equal hexagon, it states that the model design is easy operated and mastered, clear in thought and accurate calculation.
通过等边三角形和等边六边形的设计举例，说明该孔型设计简便易行，思路清晰，计算准确，易于掌握。
This model also can be used for the internal flow calculation of any two-dimensional diffuser and for improving its design.
本文的计算方法还可以应用于任意二维扩散器的内部流动计算，用来指导改进扩散器的设计。
This paper presents the performance of new model monkey winch for mine. and its design calculation of the planetary differential variable-speed drive device.
介绍了一种新型矿用小绞车的性能及其行星差速变速传动装置的设计计算。
There are four key points of plate spiral stair design, and they are model building, inner force calculation, overall stability analysis and joints design between the stair and the main structure.
对板式钢结构旋转楼梯的有限元计算进行了全面的分析，并对其与主体结构的连接节点进行了设计。
Contents include: the main tower structure, software design and calculation model and parameter selection and design of load combination treatment, analysis, etc.
内容包括：主城楼结构形式、设计软件选择、计算模型及参数处理、荷载组合以及设计分析等。
Contents include: the main tower structure, software design and calculation model and parameter selection and design of load combination treatment, analysis, etc.
内容包括：主城楼结构形式、设计软件选择、计算模型及参数处理、荷载组合以及设计分析等。
应用推荐