The design of the injection mold of multiple points, plates and molded surfaces is simplified by using lock catch facility, joined tie-bar structure and decreasing the guide-pin amount.
应用锁扣装置、组合拉杆结构，减少导柱数量，简化了多点多板多分型面注塑模具的设计。
The technological characteristics of the plastic parts with thin shell were analyzed. the design of the injection mold structure was introduced. and the working process of the mold was stated.
分析了薄壳类塑料产品的工艺特点，介绍了该类产品注射模的结构设计，并说明了该模具的工作过程。
Introduced design and manufacture methods of injection mold of injection nozzles for plastic buckets, described the mold working process.
介绍了注胶桶的注胶嘴注射模的设计制造方法，并阐述了该模具的工作过程。
The subject of Orange drums Cup injection mold design, and to consolidate and deepen the learning, has been fairly satisfied with the results, achieved the desired design intent.
本课题通过对中控盒挡板的注射模具设计，巩固和深化了所学知识，取得了比较满意的效果，达到了预期的设计意图。
The injection mold cooling system design is very important to improve the mold design and manufacture of standard and quality of products.
注塑模具冷却系统对于提高模具的设计制造水平和制品的质量是非常重要的。
The method has been used in a new generation of injection mold design and manufacturing system.
这一方法已较好地应用于构造新一代注塑模设计制造系统中。
According to the wide application of slide block design in injection mold, introduced in detail structure types and design points of injection mold slide block.
针对注射模中滑块结构的广泛应用，详细介绍了注射模滑块的各种结构类型与设计要点。
Through analyzed the molding process of the the split air-condition wind-casing, introduced in detail the injection mold structure design, mold design thought and mold design point.
通过对分体空调器出风框的工艺分析，详细介绍了出风框的塑料注射模结构设计，以及设计思路与设计要点。
Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。
This paper introduced the electronic clock back of the injection mold design process.
本论文介绍了电子钟后盖的注射模设计过程。
Based on the analysis of polymer flow in mold filling, the important role of computer aided analysis in injection mold design is presented through concrete examples.
本文在分析注塑模充模流动的基础上，通过具体实例，阐述了计算机辅助分析在模具设计中的作用。
Analyzed the influence of the plastic part injection molding process to part quality, introduced design of injection mold, mold parting structure design and mold temperature control design.
分析了塑件的成型工艺及模具注射成型对塑件质量的影响，介绍了浇注系统的设计，模具分型结构、模温控制的设计。
Design and manufacture methods of injection mold for the defecator body were introduced, and working process of mold was stated.
介绍了清净管体注射模的设计与制造方法，并阐述了模具的工作过程。
The first successful application of CAD/CAM technology in plastic injection mold design and manufacturing in China and the technical and economic benefit are introduced in this paper.
本文介绍了在国内首次把CAD/CAM技术全面地应用于注塑模具的设计和制造过程，及其所取得的良好的技术经济效益。
The vibration injection molding and mold design method are discussed by the application of the mechanical vibration technology in the injection molding of plastics.
通过对机械振动技术在塑料注射成型中的应用，探讨振动注射成型工艺及其模具设计方法。
Analyzed the structure characteristics of refrigerator hinge-led, introduced the structure of injection mold, the mold structure characteristics and mainly parts design were elaborated.
分析了冰箱上铰链盖的结构特点，介绍了注射模结构。对该模具的结构特点及主要零部件设计进行了阐述。
The design and manufacture method of spring pressed cover injection mold are introduced, and the working process of this mold is stated.
介绍了弹簧压盖注射模具的设计与制造方法，并阐述了该模具的工作过程。
The design and characteristics for the double stripper mechanism of the injection mold arc introduced.
介绍当塑料件留在动或定模中时，注射模双脱模结构的设计及其特点。
Design and manufacture points of injection mold of the special-shape coil skeleton were briefly introduced.
简要介绍了异型线圈骨架注射模哈夫结构的设计和制造要点。
In the design of multi-cavity injection mold, the design of the branch of flow channel and the gate has great influence on the quality of plastics products.
在注塑模设计中，分流道+和浇口的设计对塑料成型的质量影响较大，一直是人机交互式流道+设计的难点。
Both the design key points of injection moulding mold of chopsticks basket and the working procedure of mold are introduced separately.
分析了筷笼的塑件工艺特点，介绍了筷笼注射成型模设计要点及模具的工作过程。
The basic principle of cooling simulation technology and its application in the injection mold cooling system and the design of the processing parameters are introduced.
介绍注射模冷却模拟技术的基本原理及在注射模冷却系统和工艺参数设计中的应用。
This paper introduced the injection mold design of the Polyurethane elastomer.
介绍聚氨酯弹性体的注塑模具的设计。
Design - manufacture and characteristics of the injection mold for reflector cas 'e are introduced.
介绍反射器壳体注塑模具的设计、制造及其特点。
The design steps of injection mold for the shaver frame were introduced in detail, mainly introduced the slide core-pulling mechanism.
详细介绍了剃须刀头架注射模设计过程，重点介绍了滑块抽芯机构设计特点。
The system makes up for the weakness of CADDS5 used in injection mold structure design. It makes injection mold CAD have come true.
该系统弥补了CADDS5软件在用于注塑模设计中的不足，使注塑模具CAD得以真正实现。
The key of the injection mold for lens was the design of the runner system, exhaust system, rigidity, the choice of proper material and correct heat-treatment.
镜片注射模设计的关键在于浇注系统、排溢系统、模具刚度的设计及模具材料的选择、热处理。
This paper introduces the experimental studies on the warpage of injection molded strip parts in the design of part structure and mold gate and the selecting of molding conditions and materials.
从制品结构和模具浇口设计、原材料和成型条件的优选诸方面对长条形注塑件翘曲变形进行了系统的试验研究。
Introduced the structure of medical soft plastic tube; and technology analysis; and structure design of injection mold and mold work principle.
介绍了医用软管塑件结构、工艺分析、注射模结构设计及模具工作过程。
Introduced the structure of medical soft plastic tube; and technology analysis; and structure design of injection mold and mold work principle.
介绍了医用软管塑件结构、工艺分析、注射模结构设计及模具工作过程。
应用推荐