Based on the unified design variable method, the shape and sizing optimization design of jacket platform with dynamic ice-load is investigated.
基于统一设计变量方法，实现了导管架海洋平台在动冰载荷作用下的截面和形状动力优化设计。
The adjoint variable method for design sensitivity analysis of multibody system dynamics based on ordinary differential equations is presented.
基于常微分方程数学模型建立了多体系统动力学设计灵敏度分析的伴随变量方法。
A design method of new variable structure robust controller based on the expected characteristic is introduced.
提出了一种基于期望特性的变结构新型鲁棒控制器的设计方法。
The method is that takes physical parameter of bearing as design variable. It has good practicality in actual use. It is effective in practice proved by the use of products of fan.
该方法以轴承物理参数为设计变量，在工程实际应用中具有很好的实用性，通过在风机产品上的应用，证明该方法是行之有效的。
The engineering design method of variable refrigerant volume air-conditioning system is described in this paper.
本文着重阐述了变制冷剂流量多联分体式空调系统在工程中的设计方法。
In order to serve the design purpose, we can only use the following two means: One kind selects the variable motor, another means are use two quota motors parallel and the series connected cut method.
为了达到设计目的，我们只能采用以下两种办法：一种是选用变量马达，另一种办法是采用两个定量马达并联和串联切换的方法。
This paper studies a problem about method of determining synchronizing piont in design of cycle diagram in automation which has motional mechanism with variable throw.
本文对具有变行程运动机构的自动机械的循环图设计问题，即同步点确定方法进行了研究。
For a class of linear systems with uncertainties of unknown bound, a variable structure control (VSC) design method is proposed based on Block control principle.
针对一类非匹配不确定性的线性系统，基于块控原理，提出了一种变结构控制设计方法。
The simplified practical example for homing control system is given. This paper derives a new method for analysis and design of exponential variable parameter control system.
并以自动导引控制系统为例讨论了应用问题，导出对指数变参数系统分析设计的新方法。
The method has been applied to the optimum design of discrete variable structure.
并将此方法应用于离散变量结构优化设计中。
OTTO method is proposed for the solution of optimal design of mixed discrete continuous variable in this paper.
OTTO法是本文提出的一种可解决混合离散变量优化设计的方法。
Applying optimization design technology and the reliability theory a reliability-optimum design method of variable load cylinder helix compression spring is presented.
利用优化设计和可靠性设计方法，提出变载荷圆柱螺旋压缩弹簧的可靠性优化设计方法。
In the design of articulation hole bolt, the blur variable and random variable existing at the same time, the blur reliability design method of shear strength and extruding strength are approached.
探讨了在铰制孔用螺栓设计中，模糊变量与随机变量同时存在时，抗剪强度与挤压强度的模糊可靠性设计方法。
In order to reduce chattering phenomenon of variable structure control, a fuzzy variable structure control method is adopted and applied in the overload control system design of anti-ship missiles.
为了削弱变结构控制中的颤振现象，采用了模糊变结构控制方法，并将该方法应用于反舰导弹的过载控制系统的设计中。
This paper introduces a design method of variable pitch screw, This methed make use of multinomial, bring out the boundary conditions which the design need and the operating range of the methed.
本文介绍了一种变螺距螺杆的设计方法，该方法采用多项式，并提出了设计所需的边界条件和这种方法的使用范围。
Based on the principles of a variable structure system a design method for the variable structure control system with a variety of reference inputs is proposed in this paper.
基于变结构控制原理，本文提出了一种变结构控制系统的设计方法，它允许多种形式的参考输入。
By applying man's intelligence, a design method of intelligent variable structure stabilizer for power system was proposed on the basis of variable structure control theory.
依据变结构控制理论并运用人的智能，提出了智能变结构电力系统稳定器的设计方法。
A design method of variable structure control for the d. C. servo system is proposed. Also the sliding state stability of the system is analyzed.
本文提出了直流随动系统的变结构控制设计方法，分析了系统的滑态稳定性。
The SEL and the absolute bias approach for parameter design are studied and improved, on the basis of which the variable compartment iteration searching method is advanced in this paper.
对参数设计中序贯淘汰水平法(SEL)和绝对偏差法进行了研究和改进，提出了以SEL法与绝对偏差法结合为基础的自动变间隔迭代搜索法。
By applying nonlinear fuzzy Variable Structure control (FVSC) theory, a design method of Unified Power Quality Conditioner (UPQC) associated FVSC control is proposed.
运用非线性模糊滑模变结构控制理论，提出了对并联型电能质量调节器来进行模糊滑模变结构控制的设计方法。
A design procedure with constant parameter frequency method is developed for the temperature control system with variable parameter applicable especially to thermodynamics.
提出了热工专业中特殊的变参数控制系统的定参数频率设计法，应用计算机进行了仿真计算并进行了实际系统的测试。
The design of variable structure control for discrete time systems using method of approach is studied in this paper.
对离散趋近律方法进行研究，针对利用该方法设计变结构控制时系统产生抖振的原因，提出三种改进方案。
The design method of a flywheel with variable equivalent mass moment of inertial is presented in this paper.
提出了一种变等效转动惯量飞轮的设计方法。
An Inverse system Method is introduced for nonlinear systems control, and the design theory for single variable nonlinear control systems is described.
介绍非线性系统控制的逆系统方法及相应的单变量非线性系统的控制理论。
This paper discusses a new design method of multi variable self -tuning controller with given poles.
本文讨论了一种新的具有指定极点的多变量自校正控制器的设计方法。
By using the Constrained Variable Metric method, an optimization design model of the cartridge is established, and created a computer program, and then worked out the optimized result.
采用了约束变尺度法建立了干扰子弹的优化设计数学模型，且编制了优化设计软件，计算出了所优化的结果。
According to fuzzy knowledge characteristics in design field, a new method using fuzzy variable to represent fuzzy knowledge is brought forward in this paper.
根据设计领域模糊知识的特点，提出一种用模糊变量来表示模糊知识的新方法。
The variable impedance scaling method for design of SCN has been improved in the Paper, the resulting is that the analogue filter can be realized by Passive SCN.
改进了目前采用的开关电容网络阻抗标度设计法，使模拟滤波器可以用无源开关电容网络完成。
Discusses the problem of tentative calculation in oil tank's design with variable wall point design method.
讨论了在油罐设计中，罐壁变点法设计的试算问题。
Using sliding mode variable-structure control method to design controller, carry on stimulating and make contrast with the traditional PID in order to justify its superiority in stabilized effects.
利用滑模变结构控制方法设计控制器、进行仿真，并与传统的PID控制进行仿真对比，以验证其在减摇效果上的优越性。
应用推荐