The dielectric surface may take various shapes.
电介质表面可采用各种形状。
In this paper, main influential factors on dielectric surface discharge in transformer oil are discussed.
介绍了影响固体绝缘材料在变压器油中沿面放电特性的主要因素。
Reflux of electron of high voltage vacuum diode is one of the main factors to cause the dielectric surface flashover.
真空高压二极管中的电子回流是造成绝缘子表面闪络的重要因素。
These charges on dielectric surface are mostly high energy electrons, which affect plasma chemical reaction observably;
沉积在电介质表面的电荷主要是能量较高的电子，它们显著地影响着等离子体化学过程；
There exist the charging effects because of charge accumulation at the surface of dielectric, which decrease the dielectric surface potential and the ion implant energy.
在介质表面存在电荷积累引起的充电效应，这降低了介质表面电势和离子注入能量；
The lens consists of an array with any curved surface of revolution, or of dielectric material.
该透镜由任意旋转曲面形阵列或介质材料构成。
Dielectric barrier discharge (DBD) can be applied to modify polymer surface to improve its wettability and adhesive strength.
介质阻挡放电(DBD)处理聚合物表面可有效提高其亲水性和结合强度。
A theoretical approach analyzing electrical performance for dielectric loaded du al-layer Frequency Selective Surface (FSS) configuration with dissimilar lattice and element geometries is proposed.
提出了一种研究不同栅格及单元外形并有介质加载的双层频率选择表面（FSS）电性能的理论分析方法。
This paper discussed the basic form of the wave-vector surface and normal mode of nonreciprocal gyrotropic dielectric tensor.
本文讨论了这类非互易旋光张量下的波矢面及简正模的基本形式。
The dielectric barrier surface discharge process is simulated using Poisson's equation and drift-diffusion equation and the distribution history of electron, ion and electric field is gained.
采用泊松方程和漂移-扩散方程对介质阻隔面放电进行数值模拟，得到了电子、离子以及电场分布随时间的变化。
The modified effective dielectric theory and multiple layer film theory are employed to calculate the reflection spectrum of this kind of surface.
运用修改过的有效介质理论及多层膜理论计算了这种表面的反射率谱，并将结果与实测值进行了比较。
The effect of charges remaining on a dielectric plate upon the 50% impulse surface flashover voltage U_ (50) in the non-uniform field (rod-plane gap) is investigated.
针对不均匀电场(棒-板间隙)中绝缘板上残余电荷对50%冲击闪络电压u _(50)的影响做了一些试验研究。
Optical properties of a system composed of a metal slab with two planes of periodically arranged dielectric spheres on the metal surface have been investigated.
研究了金属板的上下表面附近各放置一层按周期排列的电介质小球的体系的光学性质。
Investigated were the effects of substrate temperature on the structures and surface morphology, dielectric properties of films.
研究了衬底温度对薄膜结构、表面形貌以及介电性能的影响。
The phenomenon of fingerprint discharge along the dielectric film surface is observed by dynamic method.
利用动态指纹提取方法观察到了手指在介质层表面产生的沿面放电现象。
In order to study the effect of atmospheric pressure air plasma on insulating material surface modification, using dielectric barrier discharge to modify polystyrene surface.
为了研究大气压空气等离子体对绝缘材料表面改性的影响，采用介质阻挡放电对聚苯乙烯进行了表面改性。
Surface integral equations for dielectric objects based on equivalent principle, such as PMCHW, TENENH, JMCFIE are presented in detail.
首先，本文详细介绍了求解介质结构的面积分方程方法及目标模型的建立。
In the detector based on surface plasmon wave resonance, the metal film contacts the detected material directly. A dielectric layer is coated on the metal film to protect it.
基于表面等离子体波共振技术的探测器中金属膜通常与被探测物直接接触，在金属膜和被探测物之间增加一层介质膜，可以对金属膜进行保护。
This method has been applied to analyze electromagnetic scattering from random rough surface, two-dimensional random dielectric cylinders, microstrip structures and densely packed interconnects.
目前这种方法已被应用于随机粗糙面散射问题的分析、随机分布的二维介质柱的散射分析、微带结构的分析、密集封装的互联分析等问题中。
The results obtained from multiple scattering method show that the periodic dielectric spheres on the upper surface of the metal could induce surface plasmons on the metal-dielectric interface.
用多重散射法计算的结果显示金属上侧的周期性排列的电介质小球可诱发金属-电介质表面上的表面等离子激元。
We match the boundary conditions to take care of the interface between the metal and the dielectric in the FDFD method. Thus the SP wave distribution on the metal surface can be accurately simulated.
在频域有限差分法使用上，我们用边界条件去处理金属和介质之间的边界，故能精确模拟出金属表面电浆波在近场的分布情形。
The ground potential unit includes a pair of conductors (13/14) formed in a tapered shape on the front and the rear surface of the dielectric substrate and mutually capacity-coupled.
接地电位单元包括在介质衬底的前表面和后表面上以楔形形状形成的并且相互电容性地 耦合的导体对（13，14）。
The boundary layer flow control using dielectric barrier surface discharge plasma is simulated using Poisson's equation, drift-diffusion model and N-S equations.
使用泊松方程、漂移扩散模型和N—S方程对介质阻隔面放电等离子体控制边界层流动进行了一体化数值模拟。
The powder mixed dielectric mirror EDM not only can improve the machined surface roughness but also the abradability and corrosion stability.
混粉电火花镜面加工不但能改善加工表面粗糙度，且能提高加工表面的耐磨性和耐蚀性。
From the calculation value, it was known that the wind speed had strong impact on the scattering characteristic of dielectric ocean rough surface.
由计算的不同风速下双站散射系数可知，风速对海洋粗糙面散射特性的影响较大。
The result shows that the surface of composite film is very smooth, and the dielectric properties are close to the conventional polycrystalline diamond films.
结果表明，复合结构由普通多晶金刚石薄膜和纳米金刚石薄膜组成，薄膜的表层结构体现了纳米金刚石的特征。
The time to dielectric breakdown under magnetic field depended on the relative Angle between magnetic field and sample surface.
磁场环境下的绝缘破坏时间依赖于磁力线与试样表面的相对夹角。
It is proved that mirror EDM with mixed dielectric powders can not only decrease the surface roughness, but also improve the surface abradability, corrosion-resistance and micro - hardness.
研究结果表明，混粉电火花镜面加工不但能够显著降低加工表面粗糙度值，而且能够提高加工表面的耐磨性、耐蚀性和表层显微硬度。
It is proved that mirror EDM with mixed dielectric powders can not only decrease the surface roughness, but also improve the surface abradability, corrosion-resistance and micro - hardness.
研究结果表明，混粉电火花镜面加工不但能够显著降低加工表面粗糙度值，而且能够提高加工表面的耐磨性、耐蚀性和表层显微硬度。
应用推荐