You will be able to modify some of the specifications such as the range and type of chart (bar or line, stacked or clustered), color and pattern choices, breakdown dimension and tooltips.
您还可以修改一些规范，比如图表的范围和类型(条形图或线形图，层叠图或聚类图)、颜色和模式选项、细分维度和工具提示。
Dimension line with label that automatically changes to match length. Text position and extension lines are adjustable.
带自动匹配长度的标签的尺寸线。文本位置和延长线是可调整的。
Drag to add a dimension to an arc or circle. Place line end at arc center, and yellow diamond on arc.
通过拖动可向弧或圆添加尺寸。将线端放在弧中心上，并将黄色的菱形放在弧线上。
The infection of the dimension of microstrip line to power capability of devices and the power capability of isolate resistor has been investigated in detail.
详细研究了微带线尺寸对器件功率容量的影响，以及大功率合成系统中隔离电阻功率容量的量值；
Ensure the dimension compressing from the free state to broken line.
应保证从自然状态压缩到虚线位置时的尺寸。
If there is any mistake in the position, dimension of height mark or reference line of the construction, the contractor shall amended it during construction.
在工程施工过程中，如果工程的位置、标高尺寸或准线出现错误，承包商应修正上述错误。
The fourth dimension, time, feels like a straight line to us, moving from the past to the future.
第四维度，时间，在我们感觉起来就是条直线，从过去到未来。
After the subroutine parameter is given the origin number, the plotter controlled by computer can draw out automatically extension line, dimension line, arrowhead and write dimension figures.
当给子程序的参数赋以初值后，由计算机控制自动绘图机绘制出尺寸界线、尺寸线、箭头和注写尺寸数字。
Process parameters of robot spraying line are designed in terms of dimension of spraying booth, moving mode, moving speed of spraying gun, spraying efficiency, etc.
从机器人的喷房尺寸、动作方式、运枪速率、喷涂效率等参数设计方面讨论了机器人喷涂流水线上的工序能力设计。
So, more and more scholars attach importance to optical three-dimension shape measurement and it is being one of front line studying fields and researching direction of information optics.
因此，光学三维面形测量技术受到广大学者的重视，正成为信息光学的前沿研究领域和方向之一。
A line is said to have one dimension.
直线被称作是一维的。
Dimension line with label that automatically changes to match length.
带自动匹配长度的标签的尺寸线。
Finally figure fitting methods like line and circle fitting were used to fit figures in the real image for measuring figure dimension precisely.
最后，根据图形的亚像素边缘通过直线和圆等图元拟合方法实现图形尺寸的精确测量。
This dimension must be at least twice the dimension from center line to handwheel.
这个尺寸必须至少为从阀门中心线至手轮距离长度的两倍。
In this paper, line methods for two dimension transpiration control equations are created, and new equations may be solved in terms of numerical methods for system of ordinary differential equations.
对二维发汗控制方程建立了直线解法，可用任何解常微分方程组的数值方法求解。
Additionally 30 a real measure that shows data, is not the logistic dimension after solution is compressed or be being caught from the data outside the line.
另外30个位表示数据的实际尺寸，而不是解压缩或者从线外数据抓过来之后的逻辑尺寸。
Combining the practical application in transfer line for boring, an on-line dimension error prediction and compensation system for boring in series production is developed and applied.
结合机械加工自动线镗孔加工的实际应用，研制了一套面向大批量生产过程的在线镗孔加工尺寸误差预测补偿系统。
If the element being tested with a tolerance requirement is a contour line or surface, point the arrow and datum symbol to the contour line or surface, and keep it away from the dimension line.
当具有公差要求的被测要素为线或平面时，将指引线箭头和基准符号指在线或平面上，且必须与尺寸线错开。
It has found that section dimension deviations yield with normal distribution; axis line deviations yield with lognormal distribution.
混凝土截面尺寸偏差服从正态分布，轴线位移偏差服从对数正态分布。
Some common drawing mistakes such as in representation of drawing, utilization of line styles, dimension label, description of section lines and technical structures are analyzed.
从图形表达、线型运用、尺寸标注、剖面线的表述和工艺结构等方面，剖析了常见的机械图样错误，并举例进行正误对比，提出了改进措施。
Research conclusions:The fractal dimension provides an extremely good indication of the state of degradation, which can be used as a judgment for hot-line dielectric degradation.
研究结论：分形维数很好地反映了电缆中水树劣化的程度，可以作为在线绝缘水树劣化的诊断依据。
But injection molding often results many product's problems such as short shots, overflow edges, warp, weld line, dimension error and so on.
但是，注塑成型常常出现各种质量问题，例如，短射、飞边、翘曲、熔接痕和尺寸误差等。
If the element being tested with tolerance requirements is an axis, centre line or symmetrical plane, the arrow and datum symbol should be aligned to the dimension line of that element.
当被测要素为轴线、中心线或对称平面时，指引线的箭头和基准符号应与该要素的尺寸线对齐。
An inductance appearance with a pole probe, automation feed framework and mode of measurement on-line are designed in the single dimension checking.
一维尺寸在线检测方法中，设计了柱形触点电感测头、自动上料机构和在线测量软件。
Refering to the pattern designing of expert system and using the method of pattern recognition, we realize automatic recognition of one -dimension curred line in computers.
该系统借鉴了专家系统的设计模式，使用模式识别的方法在计算机上实现了一维曲线的自动识别。
Signal extraction of line scan CCD used in dimension measurement;
通过对两边沿的位置捕获就可完成尺寸测量。
A straight line fitting method is adopted in edge detection of one-dimension image in the linear CCD measuring system.
在线阵CCD测量系统中采用直线拟合方法检测一维图像边缘。
This note shows that when studying geometric properties, a polynomial system is defined as a line field on a projective space such that its singular set has co dimension at least 2.
证明：在研究多项式系统的几何性质时，多项式系统应当定义成射影空间中奇点集之余维数至少为2的线场。
A new effective method with high precision for the on-line measurement of the averaged values of two-dimension regular sizes is described in this paper.
本文对二维分布规则尺寸的激光在线测量进行了研究，提出了激光—傅里叶变换测量方法。
A new effective method with high precision for the on-line measurement of the averaged values of two-dimension regular sizes is described in this paper.
本文对二维分布规则尺寸的激光在线测量进行了研究，提出了激光—傅里叶变换测量方法。
应用推荐