Applicable to all kinds of steel-plastic tube dip coating or curing.
适用于各种钢塑管的喷涂或硫化浸塑。
Dip coating: coating method in which the web is passed around a roller immersed in solution.
浸渍涂布：纸卷绕过一浸于涂面溶液的轴而加上涂层的方法。
Dip coating method was used to prepare the polyether polyurethanes coating on coronary stents.
利用浸涂方法在不锈钢冠脉支架表面制备出聚醚聚氨酯涂层。
The Indium-tin oxide (ITO) films were prepared on glass substrate using sol-gel dip coating method.
采用溶胶-凝胶工艺，用提拉法在玻璃基底上制备了ITO透明导电薄膜。
Measured by practical dip coating and experiment, the changing rule reflected by the theoretical results is coincide well with the measuring data.
经实际涂胶测定，该关系式反映的变化规律与实际是相符的。
The research in flux is mainly to change the original double hot dip coating technique, and change the first hot-dip galvanizing into electrolyzing flux.
对于助镀剂的研究主要是改变原有的双热浸镀工艺，改第一次热浸镀锌为电解助镀。
Homogeneous and transparent thin nanostructured titania films doped by Y3 + were prepared on glass substrates by sol gel processing and dip coating technique.
用溶胶-凝胶法和浸渍-提拉法工艺，在玻璃表面上制备了均匀、透明的钇离子(Y3 +)掺杂二氧化钛纳米薄膜。
The quality of finished product may be affected by various factors such as cleaning of raw materials, temperature schedule at autoclave stage, chemical dip coating of metal wire-mesh and so on.
各种材料的清洗、蒸压时的温度制度、金属丝网的化学浸镀等都会造成产品质量问题。
Dip bread into egg mixture, coating thoroughly.
将面包浸入蛋液，使蛋液彻底包裹面包表面。
The Dip-spin processing was adopted and by drying and solidification gained the zinc-basic coating with high corrosion-resistance.
采用离心浸涂的处理方式，经烘烤固化得到高耐蚀锌基涂层。
Coating of the ferrous metal with the calcium phosphate solution is accomplished by conventional dip or spray methods.
在黑色金属涂层与磷酸钙的解决办法是通过传统的浸或喷涂方法。
Coated fabric: fabric by dip-coating made of PVC or other plastic processing of products.
涂塑布：织物经浸涂聚氯乙烯或其他塑料加工而成的制品。
Results showed that the coating problem of hot-dip zinc plating workpiece was improved evidently by using the degassing agents MPP230 and MPP620 containing a primary component of polyethylene wax.
结果发现，主要成分为聚乙烯蜡的脱气剂MPP230与MPP620可以明显改善热浸镀锌件涂装存在的问题。
The paper mainly focus on the development of hot dip aluminized coating, and analyzes the composing mechanism of plating process and its microstructure.
对热浸铝的历史进行了简要回顾，分析了其镀层组织结构及形成机理。
The surface and cross-section of the pock flaws which appeared on the hot-dip galvanized coating were observed and analyzed by using SEM and energy spectroscopy.
通过扫描电子显微镜对热镀锌钢板镀层表面麻点缺陷的表面和断面形貌进行了观察，并对其进行了能谱分析。
This paper deals with the role of Ni in coating forming and the effect of Ni on process and property when adding Ni to hot dip Zn bath.
分析了在常规热镀锌浴中加镍后，镍在镀层形成过程中的作用，以及对镀层工艺、性能的影响。
A portable corrosion rate meter was used to comparatively measure the annual corrosion rates of 20 steel tube and its integral hot-dip aluminizing coating in acidic and alkali corrosive mediums.
采用便携式瞬时腐蚀速度测量仪，对20钢及其热浸镀铝件分别在酸性和碱性介质中测定年腐蚀速率并进行比较。
The research status about of the microstructure, formation mechanism and growth kinetics of hot dip aluminizing coating is reviewed. Research directions for hot-dip aluminized steel are suggested.
综述了热浸镀铝钢镀铝层的组织、形成机理、生长动力学和扩散后组织的研究现状，指出了热浸镀铝钢今后的研究方向。
PCBA conformal coating, dam process, Solder mask coating, DIP Component fixing.
PCBA表面三防涂覆、堤坝工艺、涂防焊胶、DIP元件加固等。
The carbon fabric composites were prepared by dip-coating of the carbon fabric in a phenolic resin and solidified under pressure.
将碳纤维织物浸渍-涂层酚醛-缩醛粘结剂树脂，加压固化后制备出碳纤维织物复合材料。
WO3 precursor solution was prepared by Sol-gel method. The films were printed by dip-coating method.
采用溶胶-凝胶方法制备WO3前驱液，利用浸渍-提拉法使其成膜。
The method adopts one or more of casting, hot dip plating, welding, rolling, hot pressing, electroplating and hot spray coating.
本发明可以采用铸造、热浸镀、焊接、轧制、热压、电镀、热喷涂等一种或多种方法生产。
The white corrosion products on hot dip Zn al alloy coating exposed to seawater in dynamic aerated immersion were investigated by means of XRD and TEM.
采用XRD和TEM对热浸锌铝合金镀层在动态充气海水全浸试验时所形成的白色腐蚀产物进行了研究。
The hydrophilic modification of polypropylene non-woven fabric (NWF) surface was conducted by coating PVA (poly vinyl alcohol) film on the NWF surface via dip-coating method.
采用表面涂覆法，将聚乙烯醇（PVA）薄膜固定在聚丙烯无纺布表面，进行表面亲水改性。
Hot dip galvanized coating is the most common and effective way to prevent corrosion of steel.
热镀锌镀层是钢材防蚀方法中应用最普遍的、最有效的工艺措施。
The surface modification of polypropylene non-woven fabric (NWF) by PVA (polyvinyl alcohol) was researched by dip-coating of PVA to immobilize PVA on the NWF surface.
采用表面涂覆法，将聚乙烯醇(PVA)薄膜固定在聚丙烯无纺布表面，进行表面亲水改性。
Dip shrimp in coating and spread evenly onto bread. Sprinkle some ham on the top and add diced spring onion to garnish. Put in warm oil and fry until shrimp is thoroughly cooked. Dish up.
虾沾满粉糊，平放在面包上按平，洒上少许火腿茸及芫荽装饰，放落将滚之油中炸至虾熟，捞起上碟。
Dip shrimp in coating and spread evenly onto bread. Sprinkle some ham on the top and add diced spring onion to garnish. Put in warm oil and fry until shrimp is thoroughly cooked. Dish up.
虾沾满粉糊，平放在面包上按平，洒上少许火腿茸及芫荽装饰，放落将滚之油中炸至虾熟，捞起上碟。
应用推荐