The drawing die structure of aluminum foil snack box and marginal pressure design program are introduced, the die structure is complicated.
介绍了铝箔快餐盒拉伸模结构及压边的设计方案,此模结构较复杂。
Combining the example of drawing die design for the rear side member of automobile body, studied on the drawing die structure design of saddle-shape part.
结合车身零件——后纵梁拉伸模具的设计实例,对马鞍形汽车车身零件的拉伸模具的结构设计进行了研究。
The drawing technology characteristics of the diffuser shell was analyzed, the paper determined the drawing die structure, and simply stated the design merit of diffuser shell drawing die.
分析了扩散器壳拉伸成形工艺特点,确定了拉伸成形模结构,并简述了该扩散器壳成形模结构设计优点。
It's pressing flow is confirmed by analyzing pressing technology of 42 inch plasma color TV's back cover, and expounding drawing die structure design of back cover and it's working process.
通过对4 2寸等离子彩电后盖的冲压工艺分析,确定了该制件的冲压工艺流程,阐述了后盖的拉伸模具结构设计及工作过程。
The structure material and manufacture technology of resin drawing die are introduced?
简单介绍了树脂拉伸模具的结构、材料和制造工艺。
The forming technology of rear shock absorber cap is analyzed, and its drawing die, flanging die and spinning die structure are also introduced.
分析了后减震器帽的成形工艺,介绍了成形该零件的拉深模、翻边模以及旋压模具结构。
Then the key points in design of the automatic drawing die were discussed, including the structure, the working procedure, and the automatic feeding mechanism.
介绍了铝茶壶嘴的成形工艺,自动拉伸模具的结构、工作过程、设计要点及自动送料机构。
The structure and design points of hard alloy drawing combination concave die were introduced in detail and provided the reference to the similar die design.
对硬质合金拉伸凹模结构及设计要点作了详细介绍,对同类型模具设计提供了参考。
It introduced drawing, punching progressive dies for solder pieces and analyzed the processing ability of the component for stamping and punching. The structure of the die was designed reasonably.
介绍了焊片零件拉伸、冲裁多工位级进模,分析了零件的冲压工艺性,并对模具结构进行了合理的设计。
The structure, main design parameters and work process of the compound die installed on single action press and working for blanking and drawing with constant blank holder pressure were presented.
介绍了用于单动压力机的新型恒压边力落料拉伸复合模的结构及主要设计参数和模具工作过程。
The structure of computer aided designing system of drawing technology and die(DDCAD) are introduced in this paper. The component and designing procedure are also described in this paper.
介绍了我们开发的拉深工艺及模具计算机辅助设计系统(DD CAD)的系统结构、组成及设计流程。
In view of the manufacturer's actual condition, the split welding structure of common steel sheets was adopted in the design of the die to manufacture an economic, rapid and practical drawing die.
在模具设计中,针对企业的具体情况,用普通钢板拼焊组合的结构方式,制作经济、快速、适用的拉伸模具。
Some key issues are also discussed in archiving of die drawing of automobile-covering panel and communication system, and then propose a specific system structure.
我们在讨论了汽车覆盖件模具图存档与通信系统的几个关键性问题的基础上提出了一个具体的系统结构。
Analyzed the pressing process of the shell part, introduced the structure design points of drawing-trimming die.
对壳体的冲压工艺进行了分析,介绍了拉伸、切边模具结构设计的要点。
Then layout design and various process forces of calculation is introduced. Finally drawing and extrusion compound dies is adopted to make die structure better rationalization and effectiveness.
并进行了排样设计和各种工艺参数的计算,最终采用拉深、挤边复合模具,可使模具结构更为合理而有效。
The CD-HSS box drawing experimental device included four parts of die structure, lever mechanism, hydraulic and electric control system were designed based on the CD movement principle.
基于可控拉深筋运动原理设计了可控拉深筋高强度钢板盒形件拉深实验装置,该实验装置分为模具结构、杠杆机构、液压及电气控制系统四部分。
Through the improvement in the traditional drawing process design, the structure of the drawing die was simplified and the drawing times were reduced.
通过对传统拉伸工艺设计的改进,简化了模具结构,减少了拉伸次数。
Mainly introduced the detailed structure and working process and the technology analysis of the blanking-drawing-extruding compound die for the stainless steel whistle pot cover.
主要介绍了不锈钢球形响壶盖的落料、拉伸、挤边复合模的详细结构、模具工作过程、工艺分析。
A kind of simple die structure which can realize the re-drawing of barrel-shape parts is introduced, which can be referenced by similar parts manufacture.
介绍了一种实现筒形类零件二次拉伸的简易模具结构,为类似零件的生产制造提供参考。
This paper studied the new method of deep drawing of cold rolling steel-metal part and the die structure. And it also proposed the strength calculation method of main die component.
研究了冷轧薄钢板零件的深拉伸新方法和模具结构,提出了模具主要元件的强度计算方法。
This paper studied the new method of deep drawing of cold rolling steel-metal part and the die structure. And it also proposed the strength calculation method of main die component.
研究了冷轧薄钢板零件的深拉伸新方法和模具结构,提出了模具主要元件的强度计算方法。
应用推荐