Elastic modulus is an important mechanical characteristic of wood.
弹性模量是木材的重要力学性质。
The objective of this experiment is to measure the Elastic Modulus of steel.
实验目的是测量钢的弹性模量。
Theoretic analysis for elastic modulus of softwood was carried out in this paper.
本文是关于针叶树木材弹性特性研究的理论分析。
The stiffness of a structure will be subject to elastic modulus and panel thickness.
一个结构的刚度将受到弹性模量和面板厚度的影响。
The yield strength and elastic modulus will decrease with the temperature increased.
温度升高，原子热运动加强，屈服强度和弹性模量降低。
The elastic modulus is one important mechanical performance index of plastic concrete.
弹性模量是塑性混凝土的一项重要力学性能指标。
Higher elastic modulus of bone around the implant had higher stress in cortical stress.
种植体周的骨弹性模量越高，皮质骨的应力也升高。
The impact of the material constant and the degradation of elastic modulus are analyzed.
同时分析了材料刚度衰减对疲劳裂纹扩展速率和扩展长度的影响。
The stiffness of a structure will be the elastic modulus and the effects of panel thickness.
一个结构的刚度将受到弹性模量和面板厚度的影响。
The results show that the hardness and elastic modulus increase as the sputter power increases.
经实验结果显示其硬度与弹性模数皆会随著溅镀功的增加而增加。
As an application, the scaling exponents of elastic modulus and loss modulus are also obtained.
作为应用，进而得到弹性模量和损耗模量的标度指数。
The elastic modulus of foam core and composite skins and the stiffness of sandwich are analyzed.
分析了复合材料面层的弹性常数、泡沫芯层的模量和夹层结构的刚度；
The modal frequency of the packaging structure increases with the elastic modulus of potting material.
封装结构的模态频率随着灌封胶弹性模量的增大而增大。
Other studies show that the wood static elastic modulus and the dynamic elastic modulus are different.
研究表明，木材在静载和动载下的弹性模量有所不同。
The hardness and elastic modulus of the alloy were investigated by means of nano-indentation technology.
利用纳米压入测量仪测试了不同组织结构下的硬度和弹性模量。
The relationship between stress and strain is linear, related by the Elastic Modulus of the beam material.
之间的关系，应力和应变是线性的，由有关的弹性模量对束材料。
But the optical surfacing on SiC mirrors is extremely difficult because of its high hardness and elastic modulus.
但是，由于碳化硅材料所具有高硬度、高弹性模量等性质，使碳化硅质反射镜的光学加工难度很大。
The contacting pressure of the stern bearing is influenced with its elastic modulus, radial clearance and thickness.
艉轴承弹性模量、径向间隙、厚度对接触压力分布有明显的影响。
Measuting principle, method and calculating result of boring elastic modulus instrument are introduced in this paper.
本文主要介绍钻孔弹模仪的测试原理、方法及成果计算。
The concrete with high properties has the characteristic of high strength, stiffness, elastic modulus and durability.
高性能混凝土具有高强度、刚度、弹性模量和耐久性。
Smaller both the material's elastic modulus and clearance, and thicker thickness, more even pressure distribution is.
如果材料模量与轴承间隙越小，轴承厚度越厚，则压力分布越均匀。
The influences of softening modulus and elastic modulus on local damage variable rate depend on the flow stress level.
降模量及弹性模量对局部损伤变量率的影响取决于流动应力的大小。
Elastic shear strain in shear band was dependent on shear elastic modulus, damage variable and residual shear modulus.
考虑刚度劣化后，剪切带的弹性应变由弹性剪切模量、损伤变量及残余剪切模量确定。
Experiments show: Liquid bulk elastic modulus is increased and then decreased with the increase of ratio of oil to water.
实验表明：随着油水比的增大，液体的体积模量也是先增大后减小。
The ground vibrations were calculated to analyze the influences of elastic modulus of soils and the burial depth of tunnels.
计算了列车引起的地面振动，以分析隧道地基弹性模量和隧道埋深对地面振动响应的影响。
Results show that co-braided optical fibers have just a small quantity of effect on the elastic modulus of the braided composites.
结果表明光纤的编入对材料的拉伸弹性模量和压缩弹性模量影响也较小。
The principle of a new static loading test method for weak rock masses, a method of borehole elastic modulus gauge, is described.
介绍了在软弱岩体中静荷载测试中钻孔弹模计法的原理和方法，并将该法运用到现场，得到了软弱岩体的压力变形的两种特殊形式。
With the increase of elastomer content, the tensile strength and elastic modulus of the blends decreased, while the elongation at break increased.
随着共混物中弹性体质量分数的增加，共混物的拉伸强度和弹性模量降低，扯断伸长率增大。
This paper presents three quantitative analyses of concrete damage and the method how to calculate the undamaged elastic modulus and undamaged strength.
提出了三种混凝土损伤定量计算的方法，同时还得到了推算无损混凝土弹性模量和强度的方法。
Because elastic modulus of CFRP plate are weaker than elastic modulus of steel bar, while strengthening beam is destroyed, the deflection is still strong.
由于CFR P板的弹性模量比钢筋的弹性模量小，加固梁破坏时的挠度仍较大。
应用推荐