So it is very important that studying the real-time control and advanced control method of Electro-hydraulic Servo System.
因而对电液伺服系统的实时控制和先进控制方法的研究具有非常重要的意义。
This article takes PROFIBUS as tool, USES the hydraulic servo system as the research object, and proposes digital self-diagnosis electro-hydraulic servo system research plan based on PROFIBUS.
本文以PROFIBUS总线为工具，把液压伺服系统作为研究对象，提出了基于PROFIBUS现场总线的数字式自诊断电液伺服系统的研究方案。
A method of the electro hydraulic servo system identification modeling is presented based on support vector machines.
提出了电液伺服系统的支持向量机的辨识建模方法。
According to fault characteristic of the electro hydraulic servo system, this paper has proposed a fault tolerant project that USES the fuzzy neural network as an identifier on-line.
根据电液伺服系统的故障特点，本文提出了采用模糊神经网络做在线辨识器的容错控制方案。
This paper studies the dynamic characteristics of Electro hydraulic Position Servo System, and proposes a method of equivalent flow feedback to realize serial control.
针对单回路电液位置伺服系统的动态特性，提出了一种等效流量反馈的控制方法，从而实现了串级控制。
The paper also gives a case of the electro-hydraulic position servo control system to prove the validity of the proposed ILC.
本文还给出了提出的迭代学习控制律在一个电液位置伺服控制系统中的应用实例，来验证算法的有效性。
The results prove that Neural-PID can solve the problem of the electro-hydraulic position servo system and it is a practical and feasible control tactic.
实践证明，神经PID控制策略能较好地解决电液位置伺服系统存在的问题，是一种实用可行的控制策略。
In this paper, the optimal regulator of an electro-hydraulic servo system is designed by using the quadratic theory, and the optimal regulating is realized through simulation.
文中应用二次型理论对一实际的电液伺服系统进行了最优调节器的设计，并通过仿真实现了系统的最优调节。
This paper gives a design of electro hydraulic servo control system for testing shear intensity of brakes, explaining its working principle and constitution of hardware and software.
设计了一套测试制动片粘结强度的电液伺服控制系统，介绍了系统的原理、组成和硬件、软件设计。
Through the research of the structure of extension controller, the extension control algorithm was improved, and the extension controller was applied in the electro-hydraulic servo system.
在对可拓控制器的结构进行深入研究的基础上，对可拓控制算法进行了改进，并将这类可拓控制器应用于电液伺服系统中。
The simulation study shows that the electro-hydraulic servo vibration bable system, designed using the method presented here, can realize tracking control to penodic vibration test signals.
研究表明，应用这种方法设计的电液伺服振动台系统可以实现对周期或重复性的振动实验信号的跟踪控制。
Based on the theory of variable pole state feedback control, this paper makes the process design and implement of NC software and hardware on electro-hydraulic force servo system.
基于变极点状态反馈控制理论，对电液力伺服系统进行了数控软硬件的工艺设计及其实现。
Aiming at the problems as the nonlinear factors and the position disturbance in the electro-hydraulic servo loading system of pumping unit, the conventional control method cant attain perfect effect.
抽油机电液伺服加载系统存在非线性和位置扰动引起的准确度问题，传统的控制方法不能达到理想的效果。
Fuzzy logic and neural network controller and their applications in an electro hydraulic servo position system are discussed.
讨论了模糊逻辑和神经网络控制器在电液伺服位置系统中的应用。
This paper proposes the order and parameter identification of electro-hydraulic servo system by multi-variable time series CAR.
本文提出了用多变量CAR时序模型来辨识电液伺服系统的阶和参数。
The application of electro-hydraulic servo system to the tilting car body structure is discussed.
就电液伺服系统在可倾车体结构中的应用进行了讨论。
The purpose of this paper is to apply fault tolerant control theories to the design of electro hydraulic servo system in order to raise its reliability.
本文目的旨在把当今前沿的容错控制理论应用到电液伺服系统设计中去，以提高其可靠性。
The system uses electro-hydraulic moment servo control system to simulate wave torque and PID algorithm to control. The result of simulation is up to the requirement.
本系统用电液力矩伺服控制系统来模拟海浪力矩，采用PID算法进行控制，其仿真结果符合要求。
A hybrid control method for passive electro-hydraulic servo loading system was proposed based on new compensation structure and nonlinear PID controller.
研究了基于新型补偿结构和非线性PID控制器的被动式电液伺服加载复合控制方法。
The results of simulation show that mathematical model of neural networks of electro-hydraulic servo control system has better precision and the algorithm has ability to approximate error of global.
仿真结果辨明：神经网络描述的电液伺服控制系统数学模型具有较高精度，算法全局逼近能力良好。
It is demonstrated that direct drive electro-hydraulic servo system can replace the traditional electro-hydraulic servo system in the low frequency response.
结果表明，在频响不高的场合直驱式电液伺服装置完全可替代传统的电液伺服装置。
The actualization method of the direct drive electro-hydraulic servo system was introduced, and the mathematic model of the system was built.
介绍了直驱式电液伺服系统的实现方案，并建立了系统的数学模型。
A set of electro hydraulic servo control system was designed suitable for cervical traction chair and it was proved to be effective through MATLAB stimulation.
利用电液伺服控制技术，设计一套适用在颈椎牵引椅中的电液伺服控制系统，通过M ATLAB软件对系统进行仿真，最终获得较好的控制效果。
The electro-hydraulic servo system directly controlled with speed variable pumps is a competitive and environmental beneficial driving principle.
介绍新提出的用变转速液压泵闭环控制的差动缸电液伺服系统。
Considering the nonlinear and the parameters variability, which vary widely with the working condition in the electro-hydraulic servo velocity system, fuzzy gain scheduling controller was developed.
针对电液伺服速度系统的非线性和参数时变特性，提出了模糊增益调度控制方法。
Aiming at the problems such as time-variable parameters, nonlinear dead zone of the valve existing in the electro-hydraulic position servo control system, a self-tuning fuzzy controller is designed.
针对电液位置伺服系统中存在参数的时变性、死区非线性等问题，设计了自调整模糊控制器。
Therefore, study on the control method of electro-hydraulic position servo system has great practical value and theoretical significance.
因此，对电液位置伺服系统的控制策略进行研究具有重要的实用价值和理论意义。
That is decided mainly by the typical unknown and uncertain nonlinear system of electro-hydraulic servo system, which gains precise maths model of system difficultly.
这主要是由电液伺服系统的典型未知不确定性和非线性特性所决定的，使得系统精确的数学模型难以获得。
That is decided mainly by the typical unknown and uncertain nonlinear system of electro-hydraulic servo system, which gains precise maths model of system difficultly.
这主要是由电液伺服系统的典型未知不确定性和非线性特性所决定的，使得系统精确的数学模型难以获得。
应用推荐