Do not install EPDM liner in compressed air lines.
不要在压缩空气管道内安装EPDM衬垫。
The EPDM was vulcanized by reaction extrusion moulding.
采用反应挤出法对EPDM进行动态硫化。
Compared with diolefine rubber, EPDM has less double bond.
与二烯烃橡胶相比，EPDM的双键很少。
EPDM covered distribution rollers are available for UV Inks.
三元乙丙橡胶覆盖的分布辊uv油墨。
To have an ability to seamlessly accessing EPDM data is important.
能够与EPDM数据无缝集成很重要。
The results showed that SEP had better toughening effect than EPDM.
结果表明，SEP比EPDM具有更好的增韧效果。
Do not use Vaseline or other petroleum - based products on EPDM seats.
在三元乙丙橡胶(EPDM)阀座上不要使用凡士林或其它石油基产品。
But an EPDM diaphragm may be used as a replacement in a PTFE trimmed valve.
但是，一个三元乙丙橡胶隔膜可以用作配置聚四氟乙烯阀内件的阀门的更换件。
The tensile strength and Shore A hardness decreased with EPDM amount increasing.
随着EPDM用量的增加，并用胶的拉伸强度及邵尔A硬度降低；
EPDM can be installed by either ballasting, mechanical fastening or full adherence.
三元乙丙可以安装由镇、机械紧固或完全遵守。
That PA is dispersed in EPDM improved significantly oil resistant property of EPDM.
PA分散于基体EPDM中，大幅度提高了基体的耐油性；
Introduces several ways of bonding EPDM membrane laps and carries out cost analyses.
介绍了多种EPDM卷材与卷材接合部位粘贴方法，并进行了成本测算。
Therefore, a PTFE diaphragm cannot be used as a replacement in an EPDM trimmed valve.
因此，一个聚四氟乙烯隔膜不能用作配置三元乙丙橡胶阀内件的阀门的更换件。
The application of the uniform design method to EPDM formulation experiment is described.
介绍了均匀设计法在EPDM配方试验中的应用。
The formulation and processing technology of peroxide vulcanized EPDM foam were investigated.
探讨了采用过氧化物硫化的EPDM发泡材料的配方设计和工艺。
The blend of acrylate rubber (ACM) and ethylene propylene diene terpolymer (EPDM) was prepared.
以丙烯酸酯橡胶(acm)和三元乙丙橡胶(EPDM)为主要原料制备共混材料。
Performed the ablation tests of NBR and EPDM insulation on rotating test system using erosive motor.
用烧蚀发动机在旋转实验装置上，对NBR和EPDM绝热层试件进行了烧蚀实验。
Three options for resilient seat materials (EPDM, NBR and FKM) and two packing options are available.
有三种弹性阀座材料（EPDM，NBR和FKM）以及两种密封填料可供选择。
The effects of filler fiber and flame retardant on ablative performance of EPDM insulation are studied.
研究了填充纤维、阻燃剂种类及用量对EPDM绝热层耐烧蚀性能的影响。
It was found that proper initiator concentration and EPDM content will give high grafting ratio AES resin.
结果表明，选择适当的引发剂浓度及EPDM用量可得到具有较高接枝参数的AES。
Furthermore, the stress-strain curves and stress relaxation behavior of EPDM vulcanizates was also studied.
此外，还对EPDM的应力-应变曲线和应力弛豫行为进行了研究。
The structure design of lighter one-piece frame facade effect use EPDM gaskets sealing performance is more superior.
更加轻盈的结构设计，一体式扇框外立面效果，采用EPDM胶条，密封性能更为优越。
The fireplace chimney was reconstructed and, along with the carport storage volume, was skinned with recycled epdm rubber.
壁炉烟囱以及车库和存储室也进行了重建，用回收的三元乙丙橡胶皮进行立面的包装。
The course of development of EPDM composite coloured shingle is described with focus on its main materials and self-stick layer.
介绍了EPDM复合彩瓦的研制过程，并对其中的主体材料和自粘层作了详细的论述。
The effect on the toughening of polypropylene (PP) by styrene-ethyl ene propylene diblock copolymer (SEP) as well as EPDM was studied.
考察了苯乙烯-二元乙丙橡胶嵌段共聚物(SEP)和三元乙丙橡胶(EPDM)对聚丙烯(PP)的增韧作用。
Through accelerated weather aging, surface structural changes of EPDM rubber were investigated by XPS and SEM techniques in this paper.
应用SEM、XPS等技术研究了加速气候老化对乙丙橡胶表面结构的影响。
Through accelerated weather aging, surface structural changes of EPDM rubber were investigated by XPS and SEM techniques in this paper.
应用SEM、XPS等技术研究了加速气候老化对乙丙橡胶表面结构的影响。
应用推荐