It can be compatible with chlorinated rubber, epoxy, epoxy-tar, tar, epoxy ester paint systems.
与氯化橡胶类、氧类、氨酯类、氧沥青、青系、氧酯等体系的涂料配套使用。
Process to prepare epoxy ester from tung oil and influence of tung oil to resin performance are given.
介绍了用桐油制备环氧酯的工艺，以及桐油对树脂性能的影响。
It can be compatible with chlorinated rubber, epoxy, epoxy-tar, tar, epoxy ester paint systems. But it is incompatible with oil base, alkyd, polyester coating systems.
与氯化橡胶类、氧类、氨酯类、氧沥青、青系、氧酯等体系的涂料配套使用。但不能与油性、酸、漆配套使用。
Elastic epoxy modified unsaturated polyester putty can be used to add vinyl resin and adding flexible epoxy ester resin and improvement method of unsaturated polyester elastic.
弹性环氧改性不饱和聚酯腻子可采用添加乙烯基树脂以及添加柔性环氧酯树脂等方法改进不饱和聚酯的弹性。
All kinds of structure factors causing the stability of epoxy vinyl ester resin in acid, alkali or salt solutions were particularly discussed in this paper.
较为详细论述了影响环氧乙烯基酯树脂在酸、碱、盐溶液中稳定性的各种结构因素。
In this lecture, classification, synthesis and curing of epoxy vinyl ester were related and the curing behavior of this resin was compared with that of common unsaturated polyester resin.
对环氧乙烯基酯树脂的分类、合成和固化作了叙述，并与普通不饱和聚酯固化过程进行了比较。
The results showed that the shrinkage of system were improved obviously by adding modified epoxy acrylic ester, and the diluent had effect on shrinkage.
实验结果表明：改性环氧丙烯酸酯可以明显改善体系收缩率，稀释剂对收缩率有影响。
Synthesis and properties of Bisphenol-A standard epoxy vinyl ester resin were discussed in this paper.
合成了标准型的环氧乙烯基酯树脂，对其性能进行了表征。
The results of indicated that the proportion of epoxy acrylic acid ester is the most important element influencing on the emulsification property of UV curable offset ink.
研究结果表明：环氧类丙烯酸酯的含量是影响UV胶印油墨乳化性能的重要因素。
Vinyl ester resin has good physical and chemical properties of both epoxy and polyurethane. And it also has a technological property of easy processing as what unsaturated polyester does.
乙烯酯树脂既兼有环氧和聚氨酯树脂的优良物化性能，又具有与不饱和聚酯树脂一样简便的施工工艺性。
The synthesis of epoxy acrylate type photosensitive coatings were developed by semi-ester method.
开发了一种用半酯法合成环氧丙烯酸酯型光敏涂料的方法。
The curing characteristics such as gel time, heat Peak and curing shrinkage rate of MFE epoxy vinyl ester resin (MFE type and AFE type) are discussed in this paper.
本文对MFE环氧乙烯基酯(含mfe型和afe型二种型号)树脂的固化性能(凝胶时间、放热峰和固化收缩率)作了报道并进行讨论。
Vinyl ester resin was synthesized using bisphenol A type epoxy resin and methylacrylic acid as raw materials.
以环氧树脂和丙烯酸为基本原料，合成环氧丙烯酸酯并进行了表征。
To improve the mechanical properties of high modulus carbon fibers, the interface bonding abilities of cyanate ester, epoxy 5228 and epoxy 4211 with carbon fibers were studied.
为提高高模量碳纤维复合材料的力学性能，研究改性氰酸酯、5228、4211与碳纤维结合面结合性能。
The total curing characteristic, apparent activation energy and co-curing reactivity of tetra-glycidyl amide, glycidyl ester and aliphatic cyclo type epoxy resins cured with IMI were also i…
对咪唑固化四缩水甘油胺型、 缩水甘油酯与脂环型环氧树脂的固化反应特征、动力学及其固化反应活性也进行了研究。
The total curing characteristic, apparent activation energy and co-curing reactivity of tetra-glycidyl amide, glycidyl ester and aliphatic cyclo type epoxy resins cured with IMI were also i…
对咪唑固化四缩水甘油胺型、 缩水甘油酯与脂环型环氧树脂的固化反应特征、动力学及其固化反应活性也进行了研究。
应用推荐