The bipolar plate is made from a composition containing at least epoxy resin, graphite filler and a metal amine complex compound taken as an epoxy resin curing agent.
一种双极板，由包含至少一种环氧树脂、石墨填充物以及作为环氧树脂固化剂的金属胺络合物的组合物制成。
In the preparation of conductive paints of epoxy resin filled with copper powders the reaction between the curing agent and copper was studied in detail by means of SEM and IR.
利用IR、SEM等手段，较详细地研究了铜粉—环氧树脂体系中固化剂与铜粉的相互作用，并探讨了铜粉用量、形状对涂料导电性能的影响规律。
The influence of pigment to varnish base ratio and the ratio of epoxy resin to curing agent on film's performance were studied.
研究了涂料中颜基比、固化剂与环氧树脂的当量比等对涂膜性能的影响。
Using lead benzoxy as curing agent, cured epoxy resin was analyzed by means of IR spectrum and DSC curves. Lead benzoxy was considered to be catalytic curing agent.
采用苯甲酸铅做固化剂，通过对环氧树脂固化物的红外光谱及DSC曲线分析，认为苯甲酸铅是一种催化型固化剂。
In this paper the effect of size of silver particles, proportion, curing agent and curing condition on epoxy resin - low - molecular polyamide - silver particles system are studied and discussed.
本文着重从银粉的粒度、添加量和固化剂的种类、用量以及固化条件等方面研究和探讨了环氧-低分子聚酰胺-银粉导电胶体系的导电性及强度。
The fast curing polymer alloy putty at room temperature was developed by applying of Resorcinol epoxy resin and mercapto contained curing agent.
采用间苯二酚环氧树脂和含巯基的固化剂制成了室温快固金属修补剂。
The influence of the epoxy resin, curing agent, pigments and fillers, solvents, additives, thickness of the coating film and et al on the performances thereof is discussed.
讨论了环氧树脂、固化剂、颜填料、溶剂、助剂、涂膜厚度等对涂膜性能的影响。
Through applying a liquid modified aromatic amine as curing agent for epoxy resin, a high performance resin matrix system for resin transfer moulding (RTM) was derived.
选用一种液体改性芳香胺为环氧树脂的固化剂，得到了一种适合于树脂传递模塑(rtm)的高性能树脂体系。
The cathodic electrophoretic coating of epoxy resin was prepared with half blocked isocyanate as curing agent.
在此采用半封闭的甲苯二异氰酸酯作为固化剂制得了环氧树脂阴极电泳涂料。
The influence of the kinds of epoxy resin, the proportion of composite curing agent , and the content of accelerant on the adhesive strength and heat resistant properties of adhesive were discussed.
重点讨论了环氧树脂种类、复配合固化剂比例以及促进剂用量对胶粘剂粘接强度和耐热性能的影响。
The preparation methods ofm-phenylene diamine, its chemical and physical properties and the USES as curing agent of epoxy resin and dye intermediate were described and reviewed in this paper.
本文介绍了间苯二胺的各种理化性能、制备方法，以及在环氧固化剂、染料方面的应用情况。
A sort of modified epoxy resin and curing agent in terms of its viscosity, tenacity, cold-proof and heat-proof impinge and dipping properties were described.
通过改性环氧树脂及固化剂，实验研究了浸渍胶的粘度、韧性及耐冷热冲击性、浸渍性。
Epoxy resin (E-51) and curing agent (T-31) had been applied to develop a room-temperature and quick curing resin.
以环氧树脂e - 51和T - 31固化剂为主体研究了一种新型的室温快速固化环氧树脂体系。
Raw materials, hexanediamine, epoxy resin, acrylonitrile were selected and curing agent was synthesized.
选用原料己二胺、环氧树脂、丙烯腈合成1种改性固化剂。
The different epoxy resin test samples were prepared by using different fillers and by the reaction of curing agent.
通过添加不同填料并与固化剂反应制得了不同环氧树脂试样。
The so described water-base epoxy resin coating is a two-components coating with epoxy resin as the main component, modified polyamide as curing agent and water as dispersion medium.
本文叙述的水性环氧树脂涂料是以环氧树脂为主体、水为分散剂、改性聚酰胺为固化剂的双组分涂料。
The color epoxy floor coatings are studied. Epoxy resin, polyamide adduct curing agent, pigments, filler, additives and solvent mixture are used as major material.
以环氧树脂、胺加成固化剂、颜料、填料、助剂和混合溶剂为原料研制了彩色环氧地坪涂料。讨论了各组分对涂料性能的影响。
The paint is prepared from the epoxy modified resin with complex acid, a cashew nut oil curing agent, red iron oxide, zinc oxide, a solvent, the addition agent, and the like.
本发明是由带络合酸的环氧改 性树脂，腰果油固化剂，氧化铁红，氧化锌，溶剂，助剂等配制而成的。
Study on Latent Curing Agent of Epoxy Resin Sheeting Molding Compounds;
研究了玻璃粉／环氧树脂封接复合材料的制备与性能。
Study on Latent Curing Agent of Epoxy Resin Sheeting Molding Compounds;
研究了玻璃粉／环氧树脂封接复合材料的制备与性能。
应用推荐