The effect of the core pin on extrudate characteristic was little.
机筒上的销钉对挤出特性影响力很小。
The extruder used for this process features simple head structure, low price I less space and quality extrudate.
该法使用的挤出机，具有机头结构简单、价廉、占地面积小，挤出物质量好等优点。
It's operation parameters can quickly be regulated according to the required diameter and length of the extrudate.
可以根据条状催化剂的直径和长度要求，灵活地调节切粒操作参数。
Or you can use a larger die opening to reduce die-exit stress, and then draw the extrudate down to the desired size.
否则，你也可以使用一个较大的口模开口，以减少口模出口应力，然后把挤出物拉细到所需要的尺寸。
The results indicate that the structure and quality of the extrudate are affected significantly by the material property.
结果表明，原料特性对脱脂花生粉挤压组织化产品的质量和结构有明显影响。
The extrudate diameters (radial expansion) were affected only by the sugar content, not by the salt content or screw speed.
挤出物的直径(径向变量)只受到糖分的影响，而不受盐分或螺杆速度的影响。
The curve can be applied to controlling yield quantity of the alcohol fermentation process in the maize extrudate solution.
该曲线对用膨化脱胚玉米生产酒精的工艺过程的控制有指导意义。
The system parameters and rice extrudate properties index were affected significantly by moisture content and barrel temperature.
加工温度、物料含水量对系统参数和大米膨化产品质量指标的影响极显著。
Second, saccharification process was studied using extrudate of maize without germ at the levels of optimum extrusion parameters.
其次，将脱胚玉米在上述挤压参数下进行挤压膨化，运用所得膨化物料进行糖化工艺的选择。
The effect of blending was investigated by analyzing the viscoelasticity, pressure oscillation, flow curves and extrudate appearance.
采用双毛细管流变仪详细研究了聚乙烯及其共聚物的挤出畸变、管壁滑移及挤出压力振荡现象。
The results show that oscillation in pressure drop at inlet of the capillary and the vibration and rupture of the whole extrudate co…
整条毛细管上的挤出压力发生振荡，挤出物外观发生光滑段和粗糙段交替出现的有规畸变。
The defect of extrudate in the extrusion process in the form of melt fracture could only be evidenced in the semisolid state of PP melt.
在挤出过程中，以熔体破裂形式出现的挤出物的缺陷只有在PP熔体处于半固体状态时才能观察到。
Changing the Angle at which the extrudate is drawn away from the die can change the placement of buildup on the die and make it easier to clean.
改变挤出物的牵引角度，就可以改变挤出物在口模上的堆积位置，这样就容易清除积料了。
The results showed that the extrudate with the most smooth surface was obtained when 5 phr of phenolic resin and 50/50 blending ratio of EPDM/PP were used.
结果表明，选择酚醛树脂硫化体系、控制酚醛树脂用量为5 份以及EPDM／PP共混比为50／50，可以得到挤出表面最为光滑的共混物。
The effect of certain types or contents of stabilizers, modifies and blowing agents on extrudate quality density, surface, and cellular structure are described.
讨论了稳定剂品种、 改性剂品种和发泡剂用量对制品密度、泡孔结构以及外观表面的影响。
By extruding several type starch materials on single screw extruder and twin screw extruder, the relationship of extrudate, process condition and equipment are observed.
在单、双螺杆挤出机上进行了多种淀粉原料的挤压实验，研究了原料含水率、挤压操作参数、设备结构对挤出过程和挤压产品的影响。
A model for predicting extrudate swell and average cell diameter of polypropylene foam is proposed based on the relationship between the extrudate swell and capillary number.
综合胀大比与毛细管数的关系，提出了聚丙烯发泡体系挤出胀大和泡孔平均直径的预测模型。
The extrudate swell behaviour and the factors affecting it during short die extrusion of linear low density polyethylene (LLDPE) melt have been investigated by using a rheometer.
应用毛细管流变仪，考察了线性低密度聚乙烯(LLDPE)熔体于短口型挤出中的胀大现象及其影响因素。
The influences of temperature, content of foaming agent and CaCO3 on the extrudate swell, and average cell diameter of polypropylene foam are investigated using improved capillary rheometer.
利用改进后的毛细管流变仪研究了温度、发泡剂与碳酸钙含量对聚丙烯发泡体系挤出胀大和泡孔直径的影响。
The effect of the technology and equipment, such as the structure and dimension of die plates, the extrusion conditions and so on, on the die swell and shrinkage of tread extrudate was described.
阐明影响挤出胎面膨胀和收缩的主要工艺及设备因素是口型板的结构和尺寸、挤出条件以及设备。
The extrudate shape, dimension and output can be effectively controlled on single roller extruder with its variable screw and roller speeds and the flexible combination of preform die and final die.
单辊筒口型挤出机通过变更挤出机螺杆和辊筒转速及灵活的预成型口型和终端口型设计组合可以有效控制挤出物的形状、尺寸和生产率。
The extrudate shape, dimension and output can be effectively controlled on single roller extruder with its variable screw and roller speeds and the flexible combination of preform die and final die.
单辊筒口型挤出机通过变更挤出机螺杆和辊筒转速及灵活的预成型口型和终端口型设计组合可以有效控制挤出物的形状、尺寸和生产率。
应用推荐