Main products: All kinds of plastic pipe extrusion line;
康润公司的主要产品有：各类塑料管道挤出生产线；
The start up of the state-of-the-art extrusion line is targeted for late 2009 and will produce high-performance polyester films.
在国家启动的最先进的生产线是2009年底的目标，并将生产高性能聚酯薄膜。
Main products: conical twin-screw extruder, parallel twin-screw extruder, single-screw extruder, plastic extrusion line and auxiliary equipment, plastic recycling machine.
主要产品：锥形双螺杆挤出机、平行双螺杆挤出机、单螺杆挤出机、塑料挤出生产线及其辅机设备、塑料回收设备。
The extrusion line for film and plate of chemically foamed PP, the production equipment for heat moulding plate of physically foamed PP and the application of foamed PP were presented.
介绍了化学发泡PP薄膜、板材的挤出发泡成型设备及物理发泡PP热成型板材的生产装置，另外还概述了发泡PP的应用。
The new progress about twin—screw extruders and control technology in reaction extrusion line are described. Some applications of viscometer in this processing technology are introduced too.
介绍双螺杆挤出机的最新进展以及反应性挤出生产线控制技术开发动向；详述粘度计在反应性挤出工艺中的应用。
Now, copper continuous extrusion production line composed of these equipments and their relevant auxiliary facilities has had a very high automaticity.
现在，由这些设备和相应的辅助设施组成的铜连续挤压生产线已有了很高的自动化程度。
We have extrusion machine for sheet, cast film, pp non-woven fabric, pipe, profile as well as washing &palletizing product line.
无论片材、流延膜、无纺布，管材、异型材及清洗造粒押出设备，我们一应俱全！
Basal experimental data and theory analysis are foundations for further research on Multi-Core -line-die Powder Extrusion Forming.
实验研究所获得的基础数据和理论分析，为“多芯线粉末挤压”的进一步研究奠定了基础。
The flow line function and the flow function for extrusion were obtained from the construction of velocity discontinuity lines(VDL).
由构造速度间断线模型入手，建立正挤压的流线方程，以便求得是流函数。
The deforming force of cone-die direct extrusion is solved by a mathematic method based on the simplified flow model of slip line field.
基于滑移线场的简化流动模型，运用数学方法求解出了一种锥形模正挤压变形力的最佳上限解，并将该上限解用通用解析式表达出来。
The influence factors on the extrusion process are discussed in this paper. The on-line control strategy and control methods of extruder during process are also introduced.
讨论了挤出加工过程的影响因素，介绍了应用计算机对挤出加工过程进行在线控制的策略和方法。
For the injection mode, the invention provides a reciprocating single-screw type structure and an extrusion one-line type injection structure.
在注射方式上，本发明提供了两种形式，一是往复单螺杆式，二是挤压一线式注射结构。
The inner spiral copper tube produced by extrusion-rolling process has a kind of special line defect, which influences the production yield remarkably.
采用挤轧法生产内螺纹铜管时易出现一种特有的线形缺陷，显著影响内螺纹铜管的成材率。
At present, manual control is often employed in the control of drawing and rolling machine in continuous extrusion production-line.
目前，在连续挤压生产线收排线机的控制中常采用手动控制。
Materials will be mixed, respectively, after the three-tier co-extrusion blown film line to feed the population.
将混合后的物料分别送到三层共挤吹膜设备的进料口。
On-line measurement technology of parison wall thickness for extrusion blow molding;
型坯成型是塑料挤出吹塑中的一个重要阶段。
This essay described the FEM simulation of plastic pipe extrusion: the factors of melt line formation and heat transfer of cooling processing were mainly discussed.
本文利用有限元法对塑料管材的挤出进行模拟。主要讨论了影响塑料管材挤熔接痕形成的因素，以及管子冷却过程的热传递。
In polymer precise-extrusion, the on-line measured extrusion flux is often the basis to regulate screw-engine rotation or tractor speed to improve product-precision.
聚合物精密挤出加工过程中，通常以在线检测的挤出流量为基准调节主机或牵引机转速等来提高挤出制品精度。
For a given extrusion ratio, mechanical properties of alloy wire decrease and conductivity increases with increase of on-line solution temperature and ageing temperature.
当挤压比一定时，随着在线固溶温度与时效温度的升高，线材的力学性能下降，导电性能升高。
For a given extrusion ratio, mechanical properties of alloy wire decrease and conductivity increases with increase of on-line solution temperature and ageing temperature.
当挤压比一定时，随着在线固溶温度与时效温度的升高，线材的力学性能下降，导电性能升高。
应用推荐