This technology can be used before PVC extrusion process.
该技术可应用于PVC挤出加工之前的物料准备过程。
The twin screw reactive extrusion process for nylon 6 inland was introduced.
介绍了国内尼龙6的双螺杆反应挤出工艺。
The initial design of cold extrusion process and die was obtained by code retrieval.
冷挤压工艺复杂，影响因素多，造成冷挤压工艺设计难度大。
The water content and aperture mesh directly impacted the granules during extrusion process.
挤压造粒中加水量的控制以及筛网的孔径直接影响造粒的效果。
It also analyzed the effect of different parameters of extrusion process on product property.
并通过实验挤压，初步分析了挤压诸加工参数，及其对挤出产品性能的影响。
The cold extrusion process and mould design have been introduced of the pressing drill sleeve.
介绍了冲钻套筒的冷挤压工艺、模具设计。
This is what happens when polyethylene molecules come through a die at the end of an extrusion process.
这就是当聚乙烯分子在挤压最后过程通过模具时发生的情况。
The practical calculations are made according to extrusion process parameters and some technology data.
并参照挤压工艺参数及有关技术数据进行了实际计算。
This paper introduced the knowledge based system framework of multistage cold extrusion process planning.
介绍了冷挤压工艺规划知识基系统功能的设计。
The extrusion process for hole is a simple and reliable method fors mall sized and exact holes in batches.
孔的挤压加工是成批加工较小尺寸精密孔的一种简单和可靠的方法。
The screw of twin-screw plastic extruder is complex, its structure and parameters determine extrusion process.
双螺杆塑料挤出机中的螺杆较为复杂，螺杆的结构和参数对挤出过程起决定作用。
The influence of fly ash form on extrusion process of high content fly ash(over70%)fired brick has been studied.
研究粉煤灰形态对粉煤灰掺量在70%以上的高掺量粉煤灰烧结砖挤出成型工艺的影响。
The bimetallic seamless steel pipes are successfully manufactured with a hot-extrusion process in Tubacex, Spain.
西班牙挤压成型钢管公司采用热挤压工艺成功地生产出双金属无缝钢管。
The experimental results show that it is feasible to machining the spur gear with superplastic extrusion process.
试验结果表明，用超塑挤压的方法加工圆柱直齿轮是可行的。
The profiles are manufactured by a special extrusion process then surface hardened and given a finishing treatment.
概况生产由一个特别然后挤压工艺和表面硬化整理给予治疗。
This machine USES the special designed screw and barrel, die and extrusion process to produce plastic and wood products.
这台机器采用了特殊设计的螺杆和桶，模具和挤压过程，以生产塑料和木材产品。
The hot extrusion process of magnesium alloy MB2 material with the asymmetric casing forgings has been studied in the paper.
结合非对称锥形壳体零件，研究了镁合金材料MB2的热挤压成形工艺。
So, in hot extrusion process, how to reduce wear and improve die life is one of the most concerned problems for mold designer.
因此，在热挤压过程中，如何减少磨损、避免局部磨损过大是设计人员最关心的问题之一。
The knowledge representation methods and fuzzy reasoning mechanism of a cold extrusion process planning system were researched.
研究了冷挤压工艺设计领域的知识表示以及冷挤压工艺设计系统的模糊推理机制。
Numerical simulation on cold extrusion process of automobile starter socket has been carried out by using the software DEFORM3D.
采用塑性成形有限元分析软件DEFORM3D，对汽车启动器套筒冷挤压齿部成形过程进行了数值模拟。
The manufacturing technology of reinforced-UHMWPE pipe by developing extrusion process and composite reinforcement were expatiated.
并阐述了通过改进挤出工艺和复合增强制备增强UHMWPE管材的工艺方法；
The results indicate that the chosen additive is the carrier of powder and has a good effect of holding shape in co-extrusion process.
结果表明，在构造胞状结构过程中，有机添加剂起到了粉末流动载体及对坯件的保形作用。
In our 2010 paper to the Guangdong Extruder Conference, we discussed the extrusion press as the conversion point of the extrusion process.
在2010年广东挤压技术研讨会上，我们发表了一篇论文讨论了挤压机是挤压流程的转折点。
Delete the faces that are created inside the mesh at the area of symmetry for the character (this is created during the extrusion process).
在我们进行镜像之前，删除模型内侧的面，(这是在挤出过程中创建出来的。)
Grid-experiments are performed to investigate metal flow and deformation in the shear-extrusion process of tubular components with branches.
通过网格试验研究分析了枝叉管形件剪-挤工艺过程的金属流动情况及其变形规律；
This paper described the effects of slurry plasticity on extrusion process of porous ceramics, and manufacturing methods of the plastic slurry.
对影响多孔陶瓷挤出成型工艺的一些因素进行了简要分析，重点论述了塑性泥料的制备方法。
The pore formers of the present invention are flexible and highly elastic, which inhibits rupture of the particle during the extrusion process.
本发明的成孔剂是挠性和高度弹性的，这些性质抑制了颗粒在挤出过程期间的破裂。
Cold extrusion force is the key of the success of cold extrusion process. The calculation of extrusion force is usually completed by manual work.
冷挤压力的高低是冷挤压工艺成败的关键，通常挤压力计算是人工完成的。
A renumbering algorithm has been presented which can optimize the node of die hence reduction of the bandwidth of FE in aluminum extrusion process.
本文用一种新的结点重编号算法对铝型材模具网格结点编号进行了优化，减少了有限元带宽。
The verification tests of cold extrusion process and fatigue life of a spline shaft show that the analysis results agree well with those of testing.
经花键冷挤压工艺试验和疲劳试验验证，分析结果和试验结果吻合很好。
应用推荐