A new way to generate stable ac current is found with feed back control system by single chip microcomputer. So a new high power ac current regulator is developed.
再用单片机组成反馈控制系统，从而找到了交流稳流的新方法，研制出一个大功率交流稳流电源。
Aiming at solving the unsafety problem of milling vertebra wall in spine stenosis surgery a spine robot system based on force feed back control strategy is introduced.
摘要针对脊柱椎管狭窄症减压手术中椎管壁磨削不安全这一问题，介绍了一种基于力反馈控制策略的脊柱外科机器人系统。
The mathematical models based on the assumed modes method and a closed loop velocity feed back control law are developed to describe the flexural vibration dynamic behaviors.
由自感知电压引入速度负反馈闭环控制，并由假设模态法将位移按模态展开，求解了悬臂梁结构的动态特性；
The error between the actual position and the theoretic position will be gotten and feed back the control computer.
将重心的实际位置与理论位置相减，得到偏差量，将此偏差量消除系统误差，传给望远镜控制系统。
The electro-hydraulic proportional control valve uses the proven force feed-back system for improved hysteresis, repeatability, and response.
电液比例控制阀使用的证明力反馈改善滞后性，重复性系统和响应。
This paper applies a method of linear continuous variable feedback to the control of a kind of voltage collapses induced by reactive power changes, which only USES a single variable to feed back.
应用连续变量线性反馈对一类由负荷无功功率变化引起的电压崩溃进行控制，仅用单个变量即可实现。
Combining the forecasting of machining dimension with that of process capability in a machining process, principle and method of feed-back compensative control is proposed in the paper.
将加工尺寸预测与工艺能力预测结合起来，提出对加工尺寸进行反馈补偿控制的原理和方法。
A precept of distortion control which USES harmonic notch feedback method is discussed in this paper. The control process is analyzed, and the feed-back arithmetic is given.
本文提出了利用谐波陷波法反馈方式进行失真度控制的一种方案，分析了控制过程，并给出了反馈算法。
The common control methods, such as step control, integrate control, feed back, proportional, integral, derivative and feed forward, were described.
阐述了温室控制中常用的方法，如分步控制、整体控制、反馈控制、比例控制、积分控制、微分控制、前馈控制的特点。
Moreover, PID controller was used to realize feed-back control, which could overcome the limits of direct inverse control in performance and robustness.
同时，由PID控制器构成反馈控制，克服直接逆控制鲁棒性不强的缺陷。
The stability and small dynamic errors could be confirmed by using the method of composite control in which the pitch angular rate of barbette sensed by INS was feed back and compensated in advance.
用复合控制把惯导系统测量的炮塔俯仰转动角速度（扰动角速度）反馈到控制前端，进行预先补偿，可保证小的瞬态误差和系统的稳定性。
The influence of speed feed back to improve control performance is discussed.
讨论了速度反馈对多连杆柔性机械手运动控制品质的影响。
We study the linear transmission of analog message for Gaussian autoregressive channel with noiseless feed-back by means of optimal control method.
利用最优控制思想来研究在具有无噪反馈的高斯自回归信道上的消息传输。
According to the special requires of bridge crane, it adopts the vector control theory, has functions of regulating speed smoothly, energy feed back, sequence brake etc.
本文介绍了一个控制桥式起重机的变频调速系统，它根据桥吊的特殊性能要求，采用矢量控制方式，具备平滑调速、能量回馈、顺序制动等功能。
By the feed-back control of the duty ratio according to the oscillations of the movable plate, the movable plate can be controlled to oscillate in the proper phase and at the proper oscillation Angle.
通过根据可移动板的振动对占空比的反馈控制，可控制可移动板以在适当的相位和适当的振动角振动。
While any PID control has an overshoot and reaching the target with vibrating mode, "I-SAC" is realizing smooth and fast response due to its proprietary high-gain feed-back.
虽然任何PID控制有过冲和深远的振动模式与目标，“我的死胡同”，是实现平稳和快速响应，由于其专有的高增益反馈。
Moreover, the construction process control of the bridges was made as well by the construction control method of combined self adaption and feed back.
采用自适应和反馈结合的施工控制方法进行施工过程控制。
By adopting a network control system, the equipment can communicate with the remote host machine in real time, feed back the equipment information and receive the control instructions.
采用网络控制系统，设备可以实时和远程主机通信，反馈设备信息和接收控制指令。
By adopting a network control system, the equipment can communicate with the remote host machine in real time, feed back the equipment information and receive the control instructions.
采用网络控制系统，设备可以实时和远程主机通信，反馈设备信息和接收控制指令。
应用推荐