Stop control yarn feeding speed during stop tension.
停止控制在停止张力期间的纱补浇速率。
Feeding speed is adjustable for all types of wood processing.
送料速度可调，适合各类木材的加工。
Yarn feeding speed used to activate the STOP TENSION function.
纱补浇速率过去一直启动停止张力功能。
Completely solve the model, artificial feeding speed accurate cuisine.
完全解决人工放料的模式，料理速度准确。
The temperature increases with the sawing speed and the feeding speed.
断续比值增大，锯切弧区温度随之上升。
The feeding speed can be adjusted to synchronize with the press automatically.
依出料速度之需要，自动调控送料时间，配合冲床的冲压速度。
There is an optimal spindle servo feeding speed(SFS) at which the MRR is the highest.
存在一个较佳的主轴伺服进给速度使得工件的加工速度较高。
Thus the stability of arc voltage is depended on that wire feeding speed is fast or slow.
因此电弧电压的稳定性取决于送丝速度调节的快慢。
Downward movement with the Fast and Feeding speed, the fast forward improve work efficiency;
下压行程具有快进与工进两种速度， 快进提高工作效率；
The conversion of chlorine decreased when the feeding speed of sample was too high or too low.
进样速度过高或过低，都会使氯转化率降低。
Note: the wire feeding speed and the welding voltage are dependent on the selected welding power.
注：送丝速度及焊接电压设置范围与配套焊接电源相关。
The feeding speed must be changed with continuousness and a rule, which can let the lathe work well.
从中可知，旋切过程中刀刃进给速度必须按一定规律变化才能保证旋切机正常工作。
Note: the wire feeding speed and welding voltage set range are dependent on the selected welding power.
注：送丝速度及焊接电压设置范围与配套焊接电源相关。
The paper analyzes the control algorithm of PI, external characteristic of power source and the feeding speed.
分析了PI控制算法、电源外特性控制算法、送丝速度控制算法，以及控制程序的优化设计。
The feeding speed can be adjusted for the different material, thus achieving the most ideal capacity and quality.
送料机构选用无级变速，可根据不同物料，调节相应的进料速度，从而得到最理想的产量和质量。
The stability of arc voltage is realized by adjustment of wire feeding speed in constant wire feeding system of SAW.
在埋弧焊接的变速送丝系统中，其电弧电压的稳定是依靠调节送丝速度实现的。
The results showed as follows:1) RPC had no effect on feeding speed, and had no significant effect on feed intake (P>0.05);
结果显示：1）RPC对山羊采食速度没有影响，对采食量没有显著影响（P>0.05）；
Special design mechanical relaxation installment, Achieves the ideal effect in the feeding speed the punch press coordination.
特别设计的机械式放松装置，在送料速度与冲床配合上达到理想的效果。
Special design mechanical relaxation installment, Achieves the ideal effect in the feeding speed and the punch press coordination.
特别设计的机械式放松装置，在送料速度与冲床配合上达到理想的效果。
The feeding speed of shifting unit of welding machine is one of the most important factors of rail continuous flash welding quality.
影响钢轨闪光焊接头焊接质量的因素很多，其中焊机动力柱的送进速度就是重要因素之一。
The test results showed that raw material, precipitation method, feeding speed and Si modification had great influences on dispersion property.
结果表明，不同原料路线、不同制备方法、不同加料速度以及样品中是否含硅等都对酸分散性能有较大的影响。
The results showed that increasing the feeding speed, the amount of Ca-Fe cored wire and the diameter of the tundish nozzle can prevent blockage.
结果表明，提高喂线速度、加大喂线量和增加水口内径可避免水口的堵塞。
The influences of abrasive grain size, belt speed, contact roller's hardness, grinding depth and grinding feeding speed on surface roughness were discussed.
讨论了砂带粒度、砂带线速度、接触轮硬度、磨削深度和磨削进给速度对表面粗糙度的影响规律。
High speed and high precision machinery should have not only high spindle speed and high feeding speed, but also high spindle and feeding system acceleration.
高速高精度机床不仅要有高的主轴转速和进给速度，而且还需要具有高的主轴和进给系统运动加速度。
Vibrating feeder: installed under the hopper and feeding speed can be adjusted based on real situations. It is stainless steel where it is touching the powder.
振动喂料器：安装在料斗下部，可根据实际情况调节进料速度，与料接触部分为不锈钢。
It has showed that the feeding speed of mixed monomers, temperature for polymerization and the dosage of initiator are main factors controlling the molecular weight.
结果表明，单体加入速度、聚合温度及引发剂用量是决定聚合物分子量的主要因素。
It has showed that the feeding speed of mixed monomers, temperature for polymerization and the dosage of initiator are main factors controlling the molecular weight.
结果表明，单体加入速度、聚合温度及引发剂用量是决定聚合物分子量的主要因素。
应用推荐