Finally, the present method is applied to the modal identification from the I/O data of FEM dynamic analysis and on board measurement for a container ship.
最后以一货柜轮之有限元素动态分析模拟与实船量测结果为例进行船体整体振动之态特性识别。
By using ANN and its powerful nonlinear mapping ability and combining production of FEM dynamic analysis, a new way to predicting terrane crack depth of complex fire hole is offered.
以神经网络为基本工具，利用其强大的非线性映射能力，并结合有限元法动力分析成果，为预测在复合射孔条件下岩层裂缝扩展深度提供了一条新的途径。
The time-stepping FEM model for the dynamic analysis of power system is established considering the nonlinear characteristics of internal generators and typology structures of external circuit.
建立了既考虑发电机内部非线性又考虑外部电路拓扑结构的用于系统动态分析的时步有限元模型。
By use of general FEM software and the time-domain difference of ground resistance, the structure history analysis programs with consideration of soil-structure dynamic interaction was developed.
基于通用有限元软件和地基阻抗力时域差分形式，完成了考虑土–结构动力相互作用影响的结构时程分析程序二次开发。
With the dynamic optimum analysis of the frame FEM model, a control technique of the lateral vibration is introduced.
通过对车架有限元模型进行动力优化分析，介绍了轻型货车横向振动的控制方法。
Drawbead model has been applied to the dynamic explicit FEM analysis of sheet metal forming process and the simulation of deep drawing of rectangular viewfinder of automobile headlight been realized.
将拉延筋模型引入到板料成形动力显式有限元分析中，并以汽车前照灯矩形反光镜为应用实例，对其拉延成形过程进行了模拟。
Firstly, the actual stress history of the projecting beam's maximal stress area is acquired by integrating the three-dimensional FEM analysis calculation and the dynamic stress test at field.
本文通过三维有限单元法分析计算与现场动态应力检测相结合，得到各工况下主梁最大应力部位的实际应力—时间历程。
Makes dynamic analysis of 12v180 diesel engine cylinder liner by using FEM and conducts development study on piston impact forces resulting in cylinder liner vibration.
以12v180型柴油机的汽缸套为例，用有限元法对该缸套进行了动力分析，并对引起缸套振动的活塞冲击力的处理进行了探索性的研究。
First, using second constrain, the static state and dynamic analysis applied to the frame of a few thickness plates with FEM modal analysis, distortion, stress, vibration and frequency were gained.
首先在第二种约束方式下，利用有限元模态分析方法对几种不同板厚的机架进行了动、静态分析，得到了机架变形、应力及各阶振型与频率。
The dynamic analysis of this small substructure system was made by FEM with quadrilateral isoparametric elements.
用等参数有限元法对这个小结构系统进行动力分析。
The method of dynamic internal heat resource is adopted to deal with the latent heat during FEM analysis of 3-d temperature field of plastics thermoforming in this paper.
对塑料板材热成形过程的三维温度场进行有限元分析时采用动态内部热源的方法对潜热进行了处理。
Through analysis of the coupling problem between structure and ideal liquid, some researches were done on the dynamic responses of solid liquid coupling system using FEM.
通过对结构与理想流体耦合问题的分析，利用有限元方法对流固耦合系统动力响应进行了研究。
In FEM software ABAQUS, there is no concrete material model that can be well applied to the dynamic elastoplastic analysis of three-dimensional beam element.
ABAQUS软件缺少能良好应用于三维梁单元动力弹塑性分析的混凝土材料模型。
Transient dynamic analysis of fluid-structure coupling problem by FEM;
本文应用有限元法探讨了流体与固体的瞬态动力耦合分析。
Finally, combining FEM computation with monitoring analysis is the main process of dynamic design which guides construction and assures safety.
将模拟计算结果与监测数据分析相结合，进行反馈分析和动态设计，可以有效地指导施工和保证安全。
The dynamic behaviors of the model bridge are analyzed with FEM dynamic structural analysis program before and after the model bridge is damaged.
通过改变钢桁梁模型桥单元刚度模拟其结构损伤，利用有限元结构动力分析程序对该模型桥在”损伤”前后进行了结构动力分析。
Based on the former work, dynamic FEM analysis is made on the dynamic properties of the longest-span concrete cable-stayed bridge in Asia with geometric nonlinear effects considered.
通过研究斜拉桥模态试验的特点，首次提出了在两点移动测点法的基础上，利用梁模型振型函数优化峰值拾取法的模态参数，取得了理想的效果。
Analysis the dynamic response in a variety of load conditions by the language of APDL, and the reliability analysis of offshore platform are carried on by the reliability module of the FEM software.
通过有限元软件的可靠度分析模块，对海洋平台可靠度进行分析。结构的可靠度主要与材料的屈服强度与甲板均布质量有关，是结构可靠性的限制条件。
The automobile body dynamic response characteristic research become the important field of FEM (finite element method), and the important content of analysis and design of new car.
车身动态特性研究成为新车型开发中有限元法应用的重要领域之一，是新产品开发中结构分析与设计的重要内容。
The automobile body dynamic response characteristic research become the important field of FEM (finite element method), and the important content of analysis and design of new car.
车身动态特性研究成为新车型开发中有限元法应用的重要领域之一，是新产品开发中结构分析与设计的重要内容。
应用推荐