Fin electric heating tube heater: large thermal inertia, stable heating power, not blocking the air flow channel, wide heating range, long service life.
翅片电热管加热器：热惰性大、加热功率稳定、不堵塞空气流通通道、加温范围宽、使用寿命长。
HIMOD flagship series USES interactive "type v" coil, the internal thread copper tube and punched slotted fin, and heat transfer efficiency is higher than the traditional coil unit.
HIMOD系列旗舰型采用了交互“V型”盘管，采用了带内螺纹的铜管及冲缝型翅片，比采用传统式盘管的机组有更高的传热效率。
The experimental results show that integral internal spiral fin tube is very effective for flow boiling heat transfer of freon dry evaporator.
试验结果表明，整体型内螺旋翅片管用于氟利昂干式蒸发器的流动沸腾传热是非常有效的。
Established the cooler fin tube production Division in the Utsunomiya Plant for expansion of production.
建立了较凉的翅片管的生产部门，在宇都宫厂为扩大生产。
This paper is an experimental report on heat transfer enhancement of freon-12 dry evaporator using integral internal spiral fin tube.
本文是一篇关于利用整体型内螺旋翅片管强化沸利昂12干式蒸发器传热的试验报告。
It is device for guiding fin tube that is in fining process. It transfer welded fin tube to outside without machine stop.
此装置在翅片焊接过程中为翅片管的导出装置，即将焊接好后的翅片管传送出来，而机器不用停机。
The experimental results and mechanism of heat transfer enhancement of T—Shaped fin tube were discussed.
本文还讨论了试验结果及T形翅片管强化沸腾传热的机理。
There are fin cutting devices to produce serrated fin tube and cutting speed is controlled automatically depend on welding speed of tube dancer.
开齿机将翅片切开，可生产出锯齿形翅片管。剪切速度，根据辊子输送管子后焊接的速度自动控制。
Within the range of experiment, increasing fin height or decreasing spacing of fins of petal-shaped fin tube is helpful to improve the performance of heat transfer enhancement.
在实验范围内，花瓣管翅片高度的增加、翅间距的减少都有利于传热强化性能的提高。
The electric hot air curtain machine can be divided into two types of semiconductor thermal sensitive ceramic heater and a fin electric heating tube heater according to different heating materials.
电热风幕机根据加热材料不同可分为半导体热敏陶瓷加热器和翅片电热管加热器两种。
This paper studies the pin-fin tube, smooth tube and finned tube on the same wind channel test apparatus through experimental method.
采用实验研究的方法，分别对针翅管，平直翅片管和光管在同一风洞实验台上进行了实验。
Experimental results proves that the theoretical values are close to those measured, so this formula can be used in production of cold-drawn inner fin tube.
实验结果证明，理论计算值与实测值较吻合，因而，该公式可在冷拔内直筋管的生产中应用。
Based on a comparison with a tube and fin radiator, this paper discusses and analyses the repairability and maintainability of a tube and corrugated fin radiator installed on Dong Feng EQ140-1 truck.
通过与管片式散热器总成的对比，分析、探讨了东风牌EQ140-1型汽车上所采用的管带式散热器总成的各项维修性能。
The formula of drawing force for cold-drawn inner fin tube is derived with slab method in this paper.
采用工程法推导了冷拔内直筋管拔制力的计算公式。
Emphasis is laid on the effect of tube distance and fin thickness on fin efficiency.
重点分析了圆管与扁管管间距、肋片厚度对肋效率的影响。
The air cooler is designed of nullity fin oval stainless steel bellows tube bank replacing conventional fin tube bank. It is a technological innovation designing and manufacturing of The air cooler.
空气冷却器采用无翅片椭圆不锈钢波纹管管束替代传统的翅片管管束，是空气冷却器设计制造的技术革新。
The elliptical fin-tube is the cooling element of direct air cooler tubing.
椭圆翅片管是直接空冷器管束上的冷却元件。
The experimental results are collected and compared on single experimental pipe, cross tube bundle, rectangle and triangle cross fin-tube.
对单根试验管、叉排管束、矩形截面超片管和三角形截面翅片管的试验结果进行了综合比较。
Professional R & D, welding fin tube, welding finned tube machine large equipment, quality assurance.
专业研发，焊翅片管、焊翅片管机床大型设备，质量有保证。
This kind of fin is applicable to the fin-tube cooling heat exchanger and the effect of heat transfer is perfect.
证明该圆孔翅片是一种适用于翅片管式制冷换热器且传热效果优越的片型。
The experiment results obtained can be used as the basis for adopting or designing new tube fin heat exchangers.
实验结果为运用单位选用肋片管式换热器提供了依据。
The volatilizing punching oil developed with isoalkane possesses excellent volatility, lubricity and anti-corrosion ability, which can apply to metalworking of aluminum fin-stock and copper tube.
以异构烷烃为基础油研制的挥发性冲压油具有优异的挥发性能、润滑性能和防腐蚀性能，可用于铝翅片和铜管的加工。
Comparation on the performances of the plate-fin and tube heat exchanger is made according to the base datas from power plant.
通过实测的运行数据，对板翅式换热器和管式换热器的性能进行了对比。
The volumetric heat transfer capacity of plate cooler is 1.5 times as that of fin-tube cooler and 15 times as that of tube cooler.
板式空冷器单位体积换热量约是翅片管式空冷器的1.5倍，是光管式的15倍；
Spirally corrugated and sawtooth-shaped fin tube is a high performance condensation heat transfer tube.
螺旋槽锯齿翅片管是一种新型高效冷凝换热管。
A general steady distributed parameters model of fin-and-tube heat exchanger with complex refrigerant circuits was developed based on two-phase fluid network.
基于两相流体网络，建立了针对具有复杂流路布置的翅片管换热器稳态通用分布参数仿真模型。
Under the body-fitted coordinates, a study of three-dimensional laminar flow and heat exchange characteristics of staggered round tube bank fin is carried out through finite difference method.
在适体坐标系中采用有限差分法对错排圆管管片式换热芯子的三维层流流动及其换热特性进行了研究。
Under the body-fitted coordinates, a study of three-dimensional laminar flow and heat exchange characteristics of staggered round tube bank fin is carried out through finite difference method.
在适体坐标系中采用有限差分法对错排圆管管片式换热芯子的三维层流流动及其换热特性进行了研究。
应用推荐