A significant amount of in-situ concrete was used as a finished surface.
大量的现浇混凝土作为成品的表面材料。
Jacquard, stretch fabric for customers to provide high-quality cloth and finished surface.
大提花，弹力面料竭诚为客户提供各种优质胚布和成品面。
PITTED: Small indentations appearing as black dots on finished surfaces of any piece of product; undesirable surface defects.
麻面：在任何成品零件的表面上出现的小的黑色的麻点，这是不希望的缺陷。
The influence of different cutting speed and feed rate on the roughness of vane's finished surface was investigated and analyzed.
研究分析了不同的切削速度及进给量对叶轮叶片加工的表面粗糙度的影响。
There were remnants strain and stress in the finished surface and the remnants strain and stress decreased with the distance of tool tip and the finished surface increased.
在加工表面上存在着残余应力和残余应变，且残余应力和残余应变随着与刀尖和已加工表面之间距离的增大而减小。
The grinding processes of advanced ceramic material are studied by using indentation damage theory, and their influence on the finished surface and component properties is discussed.
采用压痕损伤理论研究和分析高性能陶瓷材料的磨削加工过程及其对加工表面和零件性能的影响。
Hone not FINISHED: Defect on honed surface; finish ground surface not cleaned up adequately by the honing operation.
珩磨未完：珩磨表面的缺陷，磨加工过的表面通过珩磨工艺没有变得足够光洁。
The surface of the finished glass has the power to adsorb out of the resin mixture one or more constituent necessary for complete curing of the resin.
处理过的玻璃表面有从树脂混合物中吸附出一种或几种组分的能力，而这些组分对树脂完全固化是很必要的。
In product design and development, surface modeling of product based on measured data often is finished by some commercial software.
在产品设计与开发中，测量数据的表面建模主要采用一些商品化软件来完成。
Top deck of the carrier is finished in rough grip surface.
顶层甲板的载体，是完成在粗糙握表面。
The surface texture is finished with ornate grooves creating a dynamic rippling effect.
石凳中间是带有纹理的凹槽，创造了一种动态的水流效果。
The surface should be smooth, no foreign impurities and injury. The finished products should be polished after the cut into the appropriate size.
试样的表面应光滑，无外来杂质及损伤。成品应经打磨后裁制成相应尺寸。
Simple, make a process hole in the opposite direction of this inner surface, process with milling cutter. Fetch back the process hole after procession was finished.
简单，在该内表面的对面开加工孔，然后用铣刀加工。加工完之后，把加工孔补上。
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond surface X.
当量规套在成品灯(灯头向上)的灯头螺纹上时，灯头中心触点不应凸出量规的X面。
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond surface "X".
当量规套在成品（灯头向上）的灯头螺纹上时，灯头中心触点不应凸出X面。
I won't cover the process for rabbit skin glue here; it is a process which needs to be done correctly, otherwise at some point its surface will crack, before or after the painting has been finished.
我将不支付过程中，为兔皮肤胶水这里，它是一个过程，需要做正确的，否则，在某个时刻，其表面会开裂，之前或之后画已经完成。
I-processing plant in the industry have more advantages for customers from product development to finished product surface treatment and finishing of the package of services.
我厂在机加工行业比较有优势，可为客户提供从产品开发到成品精加工及成品表面处理的整套服务。
Even the most carefully finished metal surface is not truly flat.
即使经过最精细加工的金属表面也不会真正平整。
The walls of the bathrooms are finished in waterproof resin which provide a singular surface that is both luminous and very easy to maintain.
浴室的墙面采用防水白树脂材料，使得墙面容易维护，并有发光的效果。
The surface degree of finish is important index of production quality, discussed surface roughness of hot strip, effect and control way of cold roll process on finished product.
不锈冷轧带钢表面光洁度是重要的产品质量指标，讨论了热轧带钢的表面粗糙度和冷轧工艺对成品表面光洁度的影响及控制方法。
Drying time: in printing, the time required for an ink to form a rub-proof surface. Also, the time needed for drying before the opposite side of a sheet can be printed or finished.
干燥时间：印刷时，油墨形成一层耐磨擦的表面所需的时间，亦是印反面或作完成加工前所需的时间。
A dive is finished when the whole body is completely under the surface of the water.
当运动员整个身体浸入水面以下，一个跳水动作才算完成。
The surface reconstruct via bombardment of low energy plasma in order to enhance the adhesion between ITO coatings and substrate of PMMA is finished.
利用低能等离子体对有机玻璃表面进行改性以提高ITO膜的附着力。
When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall not project beyond surface X.
当量规套装成品灯(灯头向上)的灯头螺纹上时，灯头中心触点不凸出X面。
It was developed by SEM that the surface of wool finished by hot-reacting PU is covered by resin, and there are bond points between fibres.
通过扫描电镜等实验手段研究发现，热反应型聚氨酯整理后的羊毛纤维表面被树脂覆盖，纤维之间存在粘接点。
This series door facing is made of high density wood fiber. The surface with oak wood grain and be finished white primer painting.
此系列模压门板基材为高密度模压门板，表面为橡木纹理，喷涂的白色水性底漆。
This series door facing is made of high density wood fiber. The surface is smooth and be finished white primer painting.
此系列模压门板基材为高密度模压门板，表面为光面，喷涂的白色水性底漆。
This series door facing is made of high density wood fiber. The surface is smooth and be finished white primer painting.
此系列模压门板基材为高密度模压门板，表面为光面，喷涂的白色水性底漆。
应用推荐