The advantages of the flow injection technique (FIA) in trace analysis are discussed and the applications of FIA in trace analysis are reviewed briefly.
本文讨论了流动注射分析(FIA)技术在痕量分析中的突出优点，阐述了该技术在痕量分析领域中的应用。
Process window analysis, another part of mold flow analysis, examines melt temperature, mold temperature, injection pressure, and fill times.
加工窗口分析、它零件的模流分析，检查熔体温度、具温度、塑压力和充填时间。
The mold flow analysis utilizes the computer to simulate dynamic filling process about the injection mold.
模流分析技术是利用计算机对注塑件动态填充过程进行模拟。
The methods of approximate treat and numeric analysis for melt front fountain effect in the flow analysis of plastic injection molding was discussed in this paper.
讨论了塑料注射成型流动过程分析中熔体前沿喷泉效应的近似处理方法和数值分析方法。
Based on the analysis of polymer flow in mold filling, the important role of computer aided analysis in injection mold design is presented through concrete examples.
本文在分析注塑模充模流动的基础上，通过具体实例，阐述了计算机辅助分析在模具设计中的作用。
Conclusion Multi-slice spiral ct can provide quantitative analysis to renal blood perfusion, but injection flow rate influence the perfusion parameters.
结论多层螺旋CT可对肾脏组织血流灌注进行定量分析，但注射流率影响灌注数值。
An overview is presented on the new development of renewable surface techniques for flow injection or sequential injection analysis.
概述了流动注射(顺序注射)可更新表面分析技术及应用的新进展。
The Paper introduces the application of flow injection analysis method to automatic analysis and the flow injection analysis method in the standard analysis methods of waste water and American water.
介绍了流动注射分析法在自动分析方面的应用及美国水和废水标准分析方法中的流动注射分析法。
Flow injection technique is a solution treatment technique under nonhomogeneous and unbalanced condition and has gained wide application in food analysis.
流动注射是一种非均匀非平衡状态下的溶液处理技术，在食品分析领域中的应用日益广泛。
The combination of liquid phosphorescence with flow injection analysis and chemosensing technique has good advantages in fast, continuous and on line monitoring of medicines.
流体室温磷光结合流动注射和化学传感技术，在药物的快速连续在线监测方面优势明显。
To study the flow injection analysis method to determine urea in the water of swimming pools.
目的研究流动注射分析法测定游泳池水中尿素的方法。
The thermostat is disposed symmetrically by two same flow ways aiming at the character of the biosensor:the referential means and the flow injection analysis.
针对量热式生物传感器的参比法测量及流动分析的特点，恒温器采用相同结构参数的双流路对称布置。
A new detection system for flow injection analysis was studied.
研制了一个新的高灵敏流动注射分析检测系统。
We also show the method of FIA (flow Injection Analysis) and realized through peristaltic pump, six-way valve and flow cell.
本文给出了流通系统的设计方法，可通过蠕动泵、六通阀及测量池实现。
In the determination of total nitrogen in water sample by flow injection analysis instrument, the concentration of sulfuric acid which used for the preservation of sample affected the result.
用流动注射仪测定总氮水样，发现用不同的硫酸浓度保存总氮样品时，对其测定结果有一定的影响，并与过硫酸钾氧化-紫外分光光度法进行比对和分析。
Recent progress of the flow injection - chemiluminescence analysis was reviewed.
评述近年来流动注射化学发光分析法的最新进展。
Anionic surfactant (as) in water sample was determined rapidly by flow injection analysis with an on-line extraction functional module.
采用在线萃取预处理功能模块，配合流动注射分析法对水体中阴离子表面活性剂进行了快速测定。
The method of flow injection analysis (FIA) is described for continuously measuring chemical oxygen demand (COD) in seawater.
利用流动注射分析技术（FIA）快速、连续测定海水化学耗氧量（COD）。
To couple microdialysis sampling with flow-injection chemiluminescence analysis for real time and on-line detection of concentration of free cr (III) in the blood of rabbit.
将流动注射化学发光法与微透析采样技术联用，测定家兔血液中游离的金属离子浓度。
The effects of current velocity, sample volume, length and inside diameter of reaction pipe and shape on the dispersion of flow injection analysis system were in detail discussed in this paper.
本文详细地探讨和研究了载流速度、进样体积、反应管长度、内径与形状等因素对分散度的影响。
The separation and determination of trace sulfide in water, combined with flow injection analysis is carried out by low ion chromatography with chemiluminescence detection.
结合流动注射技术，将低压离子色谱与化学发光联用检测痕量硫离子。
The effect of chemical reaction on Sample dispersion in flow injection analysis has been verified experimentally on the basis of tanks-in-series model and statistical moment analysis.
根据串联釜模型和统计矩分析法，通过实验证实了化学反应对分散度的影响；
Flow injection was applied to analysis of NH3-N in water and the impact of various experimental conditions was studied.
将流动注射应用于水中氨氮的分析，并研究了各种实验条件对于结果的影响。
The basic principle, detection techniques and separation enrichment techniques of flow injection analysis are described briefly.
简要介绍了流动注射分析技术的基本原理、检测技术和分离富集技术。
The methods are as follows: spectrophotometry, turbidimetry, atomic absorption spectrometry, polarography, conductance, ion selective electrode, ion chromatography, and flow injection analysis etc.
包括：分光光度法、比浊法、原子吸收法、极谱法、电导法、离子选择电极法、离子色谱法和流动注射分析法等。
The new advances of flow injection analysis are summarized.
介绍了流动注射分析的新进展。
The paper mainly refers to the analytical application of flow injection chemiluminescence in pharmaceutical and metal ion analysis and consists of two parts including summary and the research works.
本学位论文主要研究了流动注射化学发光分析法在药物及金属离子分析中的应用，它包括综述和研究报告两部分。
The application of FIA two-beam photometer to flow injection analysis is studied.
开展了流动注射分析在双光束光度计上的应用研究。
The application of FIA two-beam photometer to flow injection analysis is studied.
开展了流动注射分析在双光束光度计上的应用研究。
应用推荐