The configuration of fan with flue gas as medium in domestic thermal power unit is introduced, and the development trend of configuration mode of flue gas forced draft fan is analyzed.
介绍了以烟气为工作介质的通风机在国内火电机组中的配置状况，并分析了烟气输送风机配置模式的发展趋势。
The direct catalytic reducing desulfurization of flue gas is a very important and attractive flue gas desulfurization (FGD) technique and close attention is paid popularly in recent years.
烟气直接催化还原脱硫是一种非常重要的、很有吸引力的烟气脱硫(FGD)技术，近年来受到了普遍的关注。
Aimed at the fact that the wall temperature of heat exchanger is lower than the dew point of flue gas, the thermal energy utilization system for flue gas of positive draft gas boiler is proposed.
针对烟气换热器壁面温度会低于排烟露点的情况，提出了正压通风燃气锅炉排烟热能利用系统。
Based on analysis of desulfurization mechanism of coal-fired flue gas, the existing status and recent progress on flue gas desulfurization (FGD) additives were introduced.
基于对燃煤烟气脱硫机理的分析研究，综述了烟气脱硫添加剂的研究现状及最新进展。
The path line distribution of flue gas in the scrubber becomes more homogeneous with the increasing flue gas velocity at a stationary slurry spray flux.
浆液喷淋量一定时，随烟气流速增大，塔内烟气迹线分布情况趋于均匀。
After the steam superheater was connected in series with a set of flue gas cooler, not only solved the above mentioned problems, but also made full use of flue gas surplus heat.
与蒸汽过热器串联一台烟气冷却器，不仅解决了上述问题，还充分利用了烟气多余的热量。
It emphasizes on the technology of circulating fluidized bed for flue gas desulfurization and the technology of flue gas desulfurization by micro-organism.
重点叙述了循环流化床烟气脱硫技术和微生物脱硫技术。
The flue gas desulfurization project of CHNG ShanTou electric field is chosen as a study object. The process of flue gas desulfurization, the functions of the OVATION DCS.
以华能汕头电厂烟气脱硫工程为研究对象，简要介绍烟气脱硫生产工艺过程，OVATION系统的功能。
In the range of flue gas velocity considered, the varying of flue gas velocity has a very small influence on the droplet's life time.
在文中研究的烟气速度范围内，整体上气相速度的改变对液滴完全蒸发时间的影响很小。
Exit flue gas temperature, flue gas quantity and length of flue gas jet could be control conveniently according to requirement of the boiler start up process.
用到循环流化床锅炉启动，可以任意调整出口烟气温度、出口烟气射流长度。
The fuzzy mathematic model to evaluate the comprehensive performance of flue gas heat exchangers in the wet flue gas desulfurization system of power plants was established for the first time.
首次建立燃煤电厂湿法烟气脱硫系统中烟气换热器综合性能评价的模糊数学模型。
When the said system was under operation, the dust flow, flue gas flow and the composition of flue gas were affected by the injection of limestone into the furnace.
脱硫系统运行时，炉膛喷钙对锅炉的排灰量、烟气量、烟气成分均有影响；
In order to maintain the flue temperature and guarantee the gas can combustion fully, gas pressure control loop and the sub flue suction control loop are designed.
为了控制炉温的稳定及煤气的充分合理燃烧，设计压力控制回路、吸力控制回路使煤气量和空气量稳定在设定值上。
Now, in our nation power station, there is the large deviation between the actual exit flue gas temperature and the designed exit flue gas temperature.
由于炉膛出口烟温的偏差使我国许多电站锅炉的出力达不到额定值，因而直接影响到整个电厂的安全经济运行。
The parameters considered include the mean beam length of flue gas, the emissivity of gas, the film beat transfer coefficient and the enthalpy of flue gas.
这些参数包括烟气的平均辐射长度、烟气黑度、对流传热系数、烟气的热焓等。
The experiment belongs to wet type flue gas treatment technique, studying the removing of SO_2 and NO_X from analog flue gas using urea and potassium permanganate solution as the absorbent.
本试验采用吸收剂为尿素和高锰酸钾的湿法工艺对模拟烟气中的SO_2和NO_x进行脱除的试验研究。
Gas flue suction and pressure to adapt, measuring points in the flue gas exhaust and the oxygen content to be corrected in order to maintain a certain excess air ratio, so that burning at its best.
使烟道吸力与煤气压力相适应，测量分烟道中废气的含氧量并加以校正，以保持一定的空气过剩系数，使燃烧处于最佳状态。
The recovery quantity of residual heat from flue gas and the flue resistance are calculated, and the economy and energy-saving of the residual heat recovery from flue gas are analyzed.
对烟气余热回收量及烟道阻力进行了计算，分析了烟气余热回收的经济性和节能性。
The characteristics of flue gas and actuality of its pollution were introduced in our country. The importance and impendence of flue gas denitrification technology were emphasized.
介绍了我国燃煤烟气的特点和目前烟气污染现状，突出了烟气脱硝的重要性和迫切性。
The reason of metal tube corrosion in MSW incinerator is related with flue gas composition, flue gas temperature, metal tube temperature and anti-corrosion properties of metal tube.
研究表明垃圾焚烧炉金属管腐蚀主要与烟气成分、烟气温度、金属管温度、金属管耐蚀性能等有关。
A flue gas monitoring system which can continuously work under high temperature condition has been developed to meet the requirement of flue gas analysis in waste incineration power plant.
开发了一种可用于垃圾焚烧发电厂烟气分析、能在高温下连续工作的烟气监测系统。
Wet flue gas desulfurization (WFGD) is a widely used process for flue gas desulfurization technique and a spray scrubber is a key device in WFGD system.
喷淋塔是湿法脱硫系统的核心设备，它的优化设计时于提高脱硫效率至关重要。
The recovery system of residual heat from flue gas can reduce the flue gas temperature of direct-fired machine and increase the primary energy utilization rate of direct-fired machine in summer.
烟气余热回收系统不仅降低了直燃机排烟温度，还提高了夏季直燃机的一次能源利用率。
Using an air-H_2O DC corona radical shower system, the influences of reside time of flue gas in the reactor, velocity of flue gas and NO concentration on NO oxidation process were studied.
运用以湿空气为自由基源物质的直流电晕自由基簇射系统，研究了烟气在反应器内的滞留时间、烟气流速和NO浓度对NO氧化过程的影响。
The flue gas conversion device has the beneficial effect of carrying out exchanging on the recovered flue gas and the air so as to generate combustible gases such as methane, ethane and the like.
本实用新型的有益效果：将回收的烟气与空气进行交换，生成甲烷、乙烯等可燃性气体。
The utility model relates to a half dry type flue gas desulfurization unit which belongs to the technical field of flue gas purification.
本实用新型属于烟气净化技术领域，特别涉及一种半干式烟气脱硫装置。
The calandria arrangement in the furnace floor flue gas channel that is formed by the ondol pier bricks with circular sections greatly lowers the local resistance loss of flue gas.
由圆形截面的炕墩砖，在炉底烟气通道中形成的排管式排 列，将大大降低烟气的局部阻力损失。
The design technology of rectangular air & flue gas ducts is discussed in this paper. Based on the detailed analysis for the feasibility, a rectangular air & flue gas ducts CAD system is developed.
对火力发电厂矩形烟风管道设计中的难点进行了讨论，分析了矩形管道进行计算机辅助计算的可行性，提出了解决方案，介绍了开发的一套辅助计算系统。
The design technology of rectangular air & flue gas ducts is discussed in this paper. Based on the detailed analysis for the feasibility, a rectangular air & flue gas ducts CAD system is developed.
对火力发电厂矩形烟风管道设计中的难点进行了讨论，分析了矩形管道进行计算机辅助计算的可行性，提出了解决方案，介绍了开发的一套辅助计算系统。
应用推荐