Flying shear is one of key equipment on rolling mill.
飞剪是轧机·上的关键设备之一。
The application effect and advantages of the flying shear are introduced.
在选定区域或对象中使用淡底纹效果。
The design and debugging experience for start_stop product flying shear are presented.
介绍了起停式成品倍尺飞剪电控装置设计与调试的体会。
Bring forward the effect measure of improving the start and braking feature of the CV flying shear.
提出了改善CV型飞剪机启、制动特性的有效措施。
Flying shear is used to cut head and end and design length as well as accident on wire rod producing.
线材生产中的飞剪机是用来切头、切尾、以及当出现事故时切取定尺的。
The drum flying shear of AISC Hot Strip Continuous Rolling Mill Plant has been introduced from Germany.
鞍钢热轧带钢厂的鼓式飞剪是从德国引进的。
The equipment of high-speed wire and rod mill and the characteristic of No 3 flying shear are introduced!
介绍了安钢高速线材机组设备的装备水平及3号飞剪的动作特点；
The paper introduced the quick cutter-blade changing unit of fixed length flying shear in rod rolling line.
介绍了一种棒材车间定尺飞剪机刀片快速更换装置及其使用方法。
The change of production of the bar steel plant requires that the flying shear set is modified independently.
为适应条钢厂生产的变化则须自主改造飞剪机组。
Compared with conventional flying shear, it has many advantages, such as the scope and range of shearing section...
与传统飞剪相比，具有剪切断面和剪切速度范围大等优点。
Analyze the movement and action of the CV flying shear. Discuss the main executive body influence the start and braking feature.
分析了CV型飞剪机的运动与动作特征，讨论了主要执行元件对飞剪机启、制动特性的影响。
The results show that the flying shear′s response is rapid and sensitive, and the strip sections cutted off are proved greatly slick.
结果证明飞剪响应快速灵敏，带钢剪切断面光滑。
Bringed up the optimization thought to design the CV flying shear that not only satisfy kinetics term and also satisfy the dynamics term.
提出了在设计CV型飞剪机时，应既要满足运动学条件又要满足动力学条件的优化设计思想。
Compared with conventional flying shear, it has many advantages, such as the scope and range of shearing section and velocity are wide, etc.
与传统飞剪相比，具有剪切断面和剪切速度范围大等优点。
The optimized mechanism can satisfy the cutting process requirement, and enhance both the performance of flying shear and quality of workpieces.
优化后的飞剪机构满足剪切过程要求，同时提高了飞剪的剪切性能和轧件的剪切质量。
The rotating flying shear for aluminium sheet, control method and mathematical model, program design, applied really result was mainly described.
介绍铝带材横切机组的电气控制系统，特别是旋转式飞剪的系统组成、控制方法和数学模型、程序设计思想及实际效果。
Flying shear is an important device in the finish area of cold rolling plant. Its speed is a 2d nonlinear function with strip length and density.
飞剪是带钢冷轧厂精整区域重要设备，其最佳运行速度和带钢长度、厚度成二维非线性函数关系。
The working trace of blades are obtained which is helpful for understanding the kinematics relation of crank flying shear and could help improve the maintenance.
证明该解析方法是正确的，对了解飞剪的运动关系及保养、维护有一定的益处。
The simulation and application show that the adaptive PID controller has better control performance than the ordinary PID controller in the flying shear control system.
仿真和应用结果表明，这种模糊自适应PID比常规PID控制器在飞剪控制中具有更好的控制性能。
The reason why the speed of oscillating flying shear could not be raised was analyzed by making use of the torsional vibration theory, moreover, the solutions were presented.
采用扭转振动理论，分析和讨论了影响提高摆式飞剪速度的原因，并提出了解决问题的对策。
The paper analyses deeply the start process for start-stop type flying shear and describes the calculation method of flying shear start time and the problems to be considered.
对启停式飞剪的启动过程进行深入分析，介绍飞剪启动时间的计算方法及应注意的问题。
Gauging control of the equipment is that the gear speed changing box distributes different number of revolution to the flying shear and leveller, ensuring different cut-lengths.
该设备的定尺控制是齿轮变速箱分配不同的转数到飞剪和矫直机，获得不同的定尺长度。
The control of fixed length cutter for high speed flying shear with double rollers is one of the problems which is needed to solve in the processing line for cutting hot plate blank.
高速飞剪的定长切头控制是热板坯剪切线中需要解决的课题之一，本文着重介绍了定长切头的意义、控制思想及控制方案，并对部分参数进行模拟计算。
Based on the working feature of flying shear mechanisms and considering the motion track, velocity and position Angle of connecting rod, a multi-objective optimization model is built.
根据飞剪剪切机构的工作特点，综合考虑连杆运动轨迹、速度和位置角，建立多目标优化模型。
When control the flying shear, T400 technology board can workout program with parameter mode completely. So it can be provided with exact position, fewer fault, convenient maintenance and so on.
采用T400工艺板控制飞剪，在使用上完全以参数化方式编程，具有定位准确，故障率低，维护方便等特点。
The problems in current manufacturing and research of the national flying shear have been presented with the prospect for the application of the flying shear in the steel rolling production line.
指出了目前国内在飞剪机生产和研究过程中存在的问题。展望了飞剪机在轧钢生产线上的应用前景。
Some tests with many sorts of metals combination under symmetrical impact explosion welding were studied, and a sort of flying line-adiabatic shear line in those metals combination was obtained.
摘要进行了几种金属组合的对称碰撞爆炸焊接试验。获得了这些金属组合中的飞线—绝热剪切线。分析了这种飞线产生的工艺、原因、性质和影响。
Some tests with many sorts of metals combination under symmetrical impact explosion welding were studied, and a sort of flying line-adiabatic shear line in those metals combination was obtained.
摘要进行了几种金属组合的对称碰撞爆炸焊接试验。获得了这些金属组合中的飞线—绝热剪切线。分析了这种飞线产生的工艺、原因、性质和影响。
应用推荐