These genes were related to cell cycle, immune modulation, lipid metabolism, foam cell formation, and signal transduction.
这些基因涉及细胞周期、免疫调控、脂肪代谢、泡沫细胞形成、信号转导等过程。
The foamed article has a uniform foam cell size where the foam cell size of at least 90% of the foamed cells is 50 micrometers or less.
泡沫制品具有均匀的泡孔尺寸，其中至少90％的所述泡孔的泡孔尺寸为50微米或更小。
The foamable composition has a uniform foam cell size where the foam cell size of at least (90%) of the foamed cells is (50) micrometers or less.
所述可发泡组合物具有均匀的泡孔尺寸，其中至少(90%)的泡孔的尺寸为(50)微米或更小。
Results: Angelica could decrease the plaque area significantly, inhibit the formation of foam cell in artery and increase the release of NO in aorta.
结果：当归可显著减小粥样斑块面积，抑制动脉壁泡沫细胞形成，并增加主动脉NO的生成含量。
Objective: To observe the effects of improving prescription of Didang-tang (IPDT) on the apoptosis of foam cell of aorta lipid plaque of experimental atherosclerosis(AS) rabbits.
前言： 目的：观察抵当汤改良方对实验性动脉粥样硬化（AS）家兔主动脉脂质斑块部泡沫细胞凋亡的影响。
RESULTS IPDT reduced lipid plaque area of aortic endothelium, regulated lipid metabolism, improved antioxidation of organism, ced ceramide content of aorta lipid plaque and apoptosis of foam cell.
结果抵当汤改良方能有效减轻主动脉脂质斑块面积，调节脂代谢紊乱，提高机体抗氧化酶活性，降低主动脉脂质斑块部神经酰胺含量及泡沫细胞凋亡数量。
MMP-2 protein expression can be observed in atherosclerosis, mainly in macrophage, foam cells, endothelial cell, smooth muscle cell in endomembrane, smooth muscle cell and fibrocyre in tunica media.
MMP-2在粥样硬化冠脉斑块中有表达，表达的阳性部位为内膜的血管内皮细胞胞浆、巨噬细胞胞浆、平滑肌细胞胞浆和中膜的平滑肌细胞胞浆。
The foam stability of draft beer was decreased by lowering temperature quickly and the mechanical shear power which yeast cell could be damaged.
降温速度过快、离心泵及薄板换热器的机械剪切力会破坏酵母细胞，降低纯生啤酒泡沫稳定性。
I am lucky enough to enjoy my closed cell foam mat.
幸运的是我很喜欢封闭式泡沫垫。
A model for predicting extrudate swell and average cell diameter of polypropylene foam is proposed based on the relationship between the extrudate swell and capillary number.
综合胀大比与毛细管数的关系，提出了聚丙烯发泡体系挤出胀大和泡孔平均直径的预测模型。
After analyzing the physical process of polyurethane foam formation, such conclusions can be got: bubble nucleation and bubble growth affect cell size primarily.
通过对泡沫合成中的物理过程系统分析得出：泡沫的孔径大小主要受气泡成核与气泡生长两阶段的影响。
As for pure aluminum foam, there is neglected effect of cell size on the strength and plastic modulus.
对于泡沫纯铝，孔径对屈服强度及塑性硬化模量基本没有影响。
The calculated results obtained with the static and dynamic models are capable of accurate predicting the bubble size under varied conditions of processing the closed cell aluminum foam.
根据静态和动态气泡直径预测模型计算得到的结果可准确地用于预测不同发泡条件下闭孔泡沫铝胞直径。
Evolution of pore morphology and cell wall microstructure of aluminum foam during powder metallurgical foaming was studied.
研究了粉末冶金法制备泡沫铝时泡沫孔结构及胞壁微观组织变化的规律。
Die temperature has great effects on the cell structure and foam properties.
机头发泡口模温度对发泡体结构和性能有关键性影响。
The cell structure, compression and damping properties of rigid polyurethane foam filled with hollow glass bead were studied.
研究了加入空心玻璃微珠后，硬质聚氨酯泡沫塑料的泡孔结构、压缩性能以及阻尼性能。
This study explored the feasibility and potential benefits provided by the addition of through-thickness stitched composite closed-cell foam sandwich structures.
探索了全厚度缝合复合材料闭孔泡沫芯夹层结构低成本制造的工艺可行性及其潜在的结构效益。
In the foam process of cellular plastics, bubble nucleation has decisive effect on cell density and cell distribution, so it is the crucial factor to control the foam quality.
前人对泡沫塑料气泡成核过程的研究基本上都是以经典成核理论为基础进行的。
It's found that the tetrakaidecahedral model can predict the elastic properties of the closed-cell foam quite well.
结果表明，十四面体模型可以较好地预测低密度闭孔泡沫的弹性性能。
Disclosed is a layered composite system comprising one or several layers a made of an open-cell foam based on an aminoplast, and one or several layers b made of nonwoven fabric or fibrous tissue.
本发明公开了一种层状复合体系，包含由基于氨基塑料的开孔泡沫制成的一层或几层A及由非织造织物或纤维织物制成的一层或几层B。
A open cell polyurethane rigid foam for vacuum panel core material was prepared. The open cell percent of the core material is about 95%.
制备了用于聚氨酯真空隔热板的开孔硬泡芯材，该泡沫芯材的开孔率达95%。
Pressure builds up in the foam after the components have set. The forming network of stable cell walls prevents the foam from further expanding and the blowing agent from escaping.
当组分设定后压力便在泡沫逐步积聚。形成稳定细胞壁的网络阻止泡沫进一步膨胀和防止发泡剂逃逸。
The result shows that the process conditions of polyester type open cell polyurethane foam are easy to control, and the mechanics performance of polyester type is better than that of polyether type.
实验结果表明：聚酯型网状聚氨酯泡沫塑料的制备工艺条件更容易控制，力学性能优于聚醚型；
The cell size enlarging agent permits the formation of a foam with large cell sizes that are desirable to achieve a high insulation value and to optimize the physical properties of the foamed product.
孔度放大剂可实现具有较大孔度的泡沫的形成，这对于获得较高的绝热值和优化发泡产品的物理性能是希望的。
Closed-cell foam withstands years of use and abuse.
闭孔泡沫能够承受多年的使用和滥用。
The influences of temperature, content of foaming agent and CaCO3 on the extrudate swell, and average cell diameter of polypropylene foam are investigated using improved capillary rheometer.
利用改进后的毛细管流变仪研究了温度、发泡剂与碳酸钙含量对聚丙烯发泡体系挤出胀大和泡孔直径的影响。
The results showed that in the rolling process of closed-cell aluminum foam the basic principle is multiple pass with small deformation, eg.
结果表明：闭孔泡沫铝的轧制应遵循多道次、小变形的原则。
The results showed that the load bearing and cell opening characteristics of foam products could be significantly improved by adding GPOP-H45 during the foam formation. Meanwhil...
结果发现，在发泡中加入GPOP - H 45，可显著提高泡沫制品的承载性及开孔性，同时改进了其机械性能。
The results showed that the load bearing and cell opening characteristics of foam products could be significantly improved by adding GPOP-H45 during the foam formation. Meanwhil...
结果发现，在发泡中加入GPOP - H 45，可显著提高泡沫制品的承载性及开孔性，同时改进了其机械性能。
应用推荐