And so we know the force for a particular mass, and we know the area of the piston.
我们知道每个质量对应的力，也知道活塞的面积。
The trapped air in the diaphragm will force the diaphragm between the inside of the sleeve and the outside of the piston.
罩在隔膜内的空气将施加力量在隔膜上，使其进入套筒内部和活塞外部之间。
The combustion process pushes the piston down the cylinder with great force turning the crankshaft to provide the power to propel the vehicle.
其燃烧过程产生的巨大力量的推动着活塞向下运行，带动曲轴而产生推动汽车的动力。
This mixture passes into the cylinder, where it is exploded and exerts force on the piston.
这种混合物进入汽缸，在那里发生爆炸，从而对活塞施加力。
If the excitation of the shock absorber is greater, the control piston moves to its limit position so that oil ceases flowing through the bypass duct, meaning that the full damping force is available.
如果减振器的振幅变大，控制活塞会移动到它的极限位置然后会终止旁通孔的油路，从而开始提供完全的阻尼力。
This pressure rise is so great that a force is exerted upon the top of the piston that is sufficient to force the piston all the way down the cylinder.
压力的大幅度升高使得作用在活塞顶部的力足够大，从而迫使活塞一直延气缸下行。
The piston head or "crown" is the top surface against which the explosive force is exerted.
活塞头部或“冠部”是整个活塞的最上端，处在燃烧室里要承受爆炸燃烧产生的力。
Through reformatted the hydraulic pressure system of centrifuge type HR500-N, it increases push force and time of piston to advance the performance of the machine.
通过对原HR500-N离心机液压系统的改进，使活塞推料力和推料次数增加，促使整机性能提高。
Based on the calculation of disturbing force and moment phase Angle of piston compressor discusses in details the calculation method for the same.
在活塞式压缩机扰力和扰力矩相位角计算的基础上，进一步讨论了活塞式压缩机基础扰力和扰力矩相位角的计算。
This paper by use of perturbation method found asymptotic periodic solution of piston stroke, and found rational periodic for periodic external force.
本文用摄动方法求得了活塞行程的渐近周期解，且为周期性外力求出合理的周期。
A research was made on the structure of piston ring and elastic force ring in oilless lubrication compressors.
对全无油压缩机上活塞环弹力环结构进行了研究。
When the piston is moved by the pressurized fluid, the piston rod imparts a force or moves an object through a desired distance.
当活塞由高压流体驱动时，活塞杆传递力，推动负载移动一段设定的距离。
Metal elastic force ring inside piston rings can add initial elastic force of the non-metallic piston ring to get expectative seal effect.
在活塞环的内侧设置金属的弹力环增加非金属活塞环的预弹力，可到达预期的密封效果。
Finally, GLIDE software is used for analysis of the movement and force of the piston after increasing the stroke, summarizing the operation situation of the piston and cylinder liner.
最后还利用GLIDE软件对活塞在冲程加大后的运动及受力进行了模拟分析，简要的概括了行程加大后活塞和缸套的工作状况。
The causes of the breakage of piston ring in vessel are analyzed according to the working condition and force circumstance. Some precaution and emergent measures are provided.
针对船用柴油机常见的活塞环断裂故障，分析了活塞环断裂的原因，并提出了相应的预防和应急处理措施。
An improve plan to decrease the piston impact force is brought forward based on the analysis of factors influencing the piston impact force.
在活塞冲击力影响因素分析的基础上，提出了降低其活塞碰撞冲击力的改进方案。
A spring is adjacent said piston to force said piston cylinder away from said corresponding inlet, and a shim proximate said spring to adjust the force applied by said spring on said piston cylinder.
弹簧邻近所述活塞以迫使所述活塞缸离开所述相应的入口，而垫片贴近所述弹簧，以调节所述弹簧施加在所述活塞缸上的力。
The driving force of piston is ascertained with dynamics analysis, which lays a solid foundation in theory for designing of the whole of machine.
通过动力学的分析，确定了活塞的驱动力，为进一步设计整个机器提供了理论依据。
As one of the most stringent components in diesel engine, piston transfers the driving force during its high-speed reciprocating motion and withstands high mechanical load and thermal load.
活塞是柴油机工作条件最苛刻的部件之一，它在高速往复运动中传递着整个柴油机的原动力，承受着极高的机械负荷和热负荷。
It is proved that the improvement of piston structure is effective to decrease the impact force and the knock noise caused by the piston.
说明改进活塞的结构，对于降低活塞碰撞冲击力和活塞敲击噪声具有一定的效果。
This continual bombardment by a great number of particles keeps the piston at a certain height by opposing the force of gravity acting downward on the piston and the weights.
大量粒子的这种不断撞击，反抗着作用在活塞与重物上的向下作用的重力，因而能使活塞保持在某个高度上。
The piston hasn't the reciprocating inertial force.
活塞不存在往复运动惯性力；
In this paper, the structure and principle of the magnetic force transmission coupling, and how to apply the magnetic force transmission coupling to the digital piston pressure gauge are introduced.
介绍了磁力传动联轴器的结构、工作原理以及在数字气体活塞压力计上的应用。
This paper introduces systematically the method for measuring the instantaneous friction force of cylinder liner-piston pair in the engine.
系统地阐述了发动机缸套活塞组瞬态摩擦力的测量方法。
The net effect on the piston of all these small irregular forces must be equal to that of the force of gravity if there is to be equilibrium.
假使两方面保持平衡，那么所有这些小的不规则的力对活塞的有效作用必须与重力相等。
Two coils move a piston back and forth magnetically at a constant force.
两组线圈在一个连续电磁力的作用下来回移动一个微型活塞。
Two coils move the piston back and forth magnetically at a constant force.
两组线圈在一个连续电磁力的作用下来回移动一个微型活塞。
The numerical solution of the equation describing the motion of the floating piston pin is obtained by bringing in the conception of friction force coefficient under slide-roll condition.
引入滚滑状况下的摩擦力系数，从而求得活塞销运动方程的数值解。
The numerical solution of the equation describing the motion of the floating piston pin is obtained by bringing in the conception of friction force coefficient under slide-roll condition.
引入滚滑状况下的摩擦力系数，从而求得活塞销运动方程的数值解。
应用推荐