Process control of furan resin-bonded sand self-curing technology.
呋喃树脂自硬砂生产工艺过程控制。
The review of recent research progresses of furan resin was presented and discussed.
综述了近年来呋喃树脂的研究进展。
A novel furan resin was synthesized by polycondensation between furfuralcohol and furfural.
用糠醇和糠醛缩聚制备了新型呋喃树脂。
The effect of the amount of furan resin on the morphology of composites was studied with the help of SEM.
利用SEM分析了树脂含量对复合材料表面形貌的影响。
An anticorrosion method of using modified water glass concrete lining of furan resin for saturators is introduced.
介绍了一种对饱和器采用呋喃改性水玻璃混凝土衬里的防腐蚀方法。
The reason causing nodularization degeneration in surface layer of furan resin sand nodular iron castings was analyzed.
对呋喃树脂砂球墨铸铁件表层球化衰退原因进行了分析。
Authors introduces an example of applying no-bake furan resin sand technology to large-scale and high-efficient molding line.
介绍了一种把呋喃树脂自硬砂工艺应用于大批量、高效率造型线的实例。
The design and construction technique for furan resin concrete whole ground with good anticorrosion performance are introduced.
较详细阐述了贵溪冶炼厂呋喃树脂混凝土整体地面的设计和施工技术。
Furan resin sand is poor in collapsibility when it is used for al alloy casting, specially for some large, thin section castings.
呋喃树脂砂用于铝合金铸造时，特别是对于一些大型、薄壁铝合金铸件，型芯的溃散性较差。
The structure changing before and after hardening reaction of furan resin was systematically investigated using infrared spectroscopy.
采用红外光谱法等分析测试手段对呋喃树脂在硬化反应前后的结构变化进行了系统研究。
The conclusions are employed in cold-setting furan resin sand mould (core) in production of cylinder block of heavy marine diesel engine.
所得结果在呋喃树脂自硬砂型（芯）大型船用柴油机缸体铸铁件生产中得到验证和应用。
By adopting the compound mold of die mold, furan resin sand and graphite sand, the heavy duty thin wall complex Al-alloy castings have been successfully produced.
采用金属型、呋喃树脂砂、石墨砂等复合铸型，成功生产了大型、薄壁、复杂铝合金铸件。
The causes that residual catalysts affect the curing velocity and cured strength of used sand bonded with furan resin and reclaimed furan sand were studied and discussed deeply.
就残留催化剂和其分解物影响呋喃树脂旧砂及其再生砂的固化速度和固化强度的原因作了较深层次的研究和探讨。
Zhangjiagang Dingfeng Foundry material Co., Ltd. was established in 1988, which is professional in producing furan resin, sulfoacid firming agent for casting and other supporting materials.
张家港市鼎峰铸造材料制造有限公司成立于1988年。是专业生产各铸造用呋喃树脂、铸造用磺酸固化剂及其他铸造用配套材料。
In this paper, with modifier UF resin and strengthening agent ethyl silicate, furan resin was modified. By studying the mechanics properties of the resin, the best blending rate was decided.
本文采用脲醛树脂为改性剂，硅酸乙酯为增强剂，对呋喃树脂砂进行改，并通过对力学性能的研究，确定了最佳混合比。
A new modified furan resin sand consolidation agent has been researched due to sand production in moderate shallow fine siltstone reservoir, and it has been applied successfully in Qinhai oil field.
针对我国中浅层细粉砂岩油藏开采过程中严重出砂的问题，研制出一种新型改性呋喃树脂固砂剂，并在青海油田中浅层细粉砂岩油藏水井防砂应用成功。
A new modified furan resin sand consolidation agent has been researched due to sand production in moderate shallow fine silts one reservoir, and it has been applied successfully in Qinhai oil field.
针对我国中浅层细粉砂岩油藏开采过程中严重出砂的问题，研制出一种新型改性呋喃树脂固砂剂，并在青海油田中浅层细粉砂岩油藏水井防砂应用成功。
A new modified furan resin sand consolidation agent has been researched due to sand production in moderate shallow fine silts one reservoir, and it has been applied successfully in Qinhai oil field.
针对我国中浅层细粉砂岩油藏开采过程中严重出砂的问题，研制出一种新型改性呋喃树脂固砂剂，并在青海油田中浅层细粉砂岩油藏水井防砂应用成功。
应用推荐